Scaling lines – Trough belt blast wheel blasting system with steel link belt and dump loader

Location article

Manufacturer

Description

MSGB1100 - trough belt blast wheel blasting system with steel link belt and dump loader, belt width 1,100 mm - drum diameter 1,600 mm - largest filling weight 2,000 kg - largest workpiece weight 50 kg, 2 blasting turbines - blasting wheel diameter 380 mm - blasting wheel drive power 2 x 18.5 kW, filter system with 7,000 m³ suction power per hour - 112 m² filter area, drive power - trough belt 5.5 kW - bucket elevator 2.2 kW - lower screw conveyor 1.5 kW - hydraulic unit for the tipper loader 3 kW - filter system 5.5 kW.

Centrifugal blasting machines are used for surface treatment (cleaning, rust removal, descaling, paint stripping) of steel plates, steel beams, as well as flame and plasma cut parts. The impact of the abrasive, which is thrown onto the workpiece at high pressure and very high speed, results in reliable cleaning. The surface of the workpieces after blasting is normally a fine-grained one and is so clean that the parts can be primed or painted immediately in the subsequent work step. It is important that the parts to be blasted are dry and not oiled. Depending on the type and purpose of the system, the continuous systems have an integrated roller conveyor system, a chain conveyor, a wire mesh or trough belt. The extraction and air filtering takes place in the same line as the radiation.

Condition

Machine under power