Transfer systems – Holzma HPV 11 43 22

číslo nabídky: M36137
€ 1.990,- plus DPH
Poslat žádost
fotografie
Holzma HPV 11 43 22 - koupit použité/uploadpic/tramaofinal_inserat/bilder/36137/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild6.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild7.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild8.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild9.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild10.jpg,/uploadpic/tramaofinal_inserat/bilder/36137/bild11.jpg

popis

Reclining: 21 KVA
Control: Beckhoff
Nge: approx. 12000 mm
Stellpl ä tze: 12
(1200 x 1000 mm)
Component weight: 15 KG
Fl ä che:   12 x 5,5 x 4 m
"
}, {
"translation" : "Machine Description
"
}, {
"translation" : "
Promot Automation with the following scope of delivery:
"
}, {
"translation" : "-  Portal Grundgesteep-boom portal
-  Tropttassen
-  Daugrease ration
-  Central Maintenance Unit
-protective door
oProtection grid system (wire mesh)
Robot Cell Basic Frame
-  Rost in a Soil Cup
-  cantilever sled
-  Portal Arm
  Pneumatic maintenance cutoff
Swivel drive (NC-controlled)
Parallel gripper 7
Special gripper finger for take-off unit set
"
}, {
"translation" : "Part attendance control
2 x pallet loading station (for 4 pallets each)
Wrap station
Out-of-the-turn slide
Raw substation station
Ready-to-finish station
Straightening Station
Tax cabinet Rittal
Handoperated KeTop T50
Additional Industrial PC
pPhone-Femdiagnosis for Beckhoff Control-via Modern
"
}, {
"translation" : "Robot control Kuka KRC
Signalleuke 3 Colors
Fliegendeworkpiece surveying-Interface Promot-Robot
gSoftware creation
Necessary hall height 5.000mm
power supply (standard, continuous operation) kVA 13-compressed air lanschlu ß cbm / 0,5
"
}, {
"translation" : "
Run OP10
1. Portal: vertical pastry of pallet marked with OP 10
2. Place vertically in the base of the substation
3. Robot: unloading ready-to-use tell-place horizontally in the precast-part storage place
"
}, {
"translation" : "4. Robot: receptacle vertical blank from blank parking space -- Part length measurement-Beladen BAZ
I
5. Portal: receptacle finished part horizontally out of precast storage position-loading and unloading embossing station horizontal-transfer station Change from horizontal to vertical position-depositing in pallet in defined position to match the embossed part number
"
}, {
"translation" : "He
All of these processes are per part
"
}, {
"translation" : "2 x cross bolt through 75 x 100mm QB 100
62 x Cross-bolt diameter 75 x 280mm QB 280
8 x     transverse bolt through 75 x 316 mm QB 316
"
}, {
"translation" : "OP20 expiration
"
}, {
"translation" : "1 Portal: vertical part intake of pallet marked with OP20
"
}, {
"translation" : "2. Ablation in the vertical position of the raw part
3. Robot: load-off finished part-drop horizontally into the charging station washing station
4. Robots. Uptake of vertical unmachined part from blank deposit place-Ablegenhorizontalin straightening station -- radial alignment after cross-bores and force-locking alignment through high-coming bolts
"
}, {
"translation" : "n5. Robot. Aligned part in the clamping device and immediately span
Portal: recording of washed and lazy part horizontally from the
Washing machine -- Switching station Change from horizontal to vertical position-deposit in pallet in a defined position to match the embossed part number
"
}, {
"translation" : "I
"
}, {
"translation" : "All of these processes are per part
"
}, {
"translation" : "2 x cross bolt through 75 x 100mm QB 100
62 x Cross-bolt diameter 75 x 280mm QB 280
8 x     transverse bolt through 75 x 316 mm QB 316
"
}, {
"translation" : "
(Technical data subject to reservation, as information provided by the manufacturer)
"
}, {
"translation" : "

Keep in mind that the advertisement was translated automatically and may have errors. We are not responsible for these errors.

stav

Nové a nepoužité

Stroj pod proudem

ne
Poslat žádost

Nabídka od:

Gerhard Sondermann GmbH

Gerhard Sondermann GmbH
Wiesengrund 7
57368 Lennestadt

kontakt: Markus Sondermann

Poslat žádost
Zobrazit telefonní číslo
telefon: +49272182061
Zobrazit profil společnosti



Další zajímavé nabídky z této kategorie Transfer systems

Manipulator DANGO + DIENENTHAL ZCH 5 FZ - Diesel
Transfer systems – Manipulator DANGO + DIENENTHAL ZCH 5 FZ - Diesel (BJ.1987)

Cena na vyžádání
Manipulator DANGO + DIENENTHAL S 30.1 SVS
Transfer systems – Manipulator DANGO + DIENENTHAL S 30.1 SVS (BJ.1986)

Cena na vyžádání
Manipulator DANGO + DIENENTHAL AMP 1000
Transfer systems – Manipulator DANGO + DIENENTHAL AMP 1000 (BJ.1976)

Cena na vyžádání
Robot - Handling STAEUBLI RS 80 CS 8 C SCARA
Transfer systems – Robot - Handling STAEUBLI RS 80 CS 8 C SCARA

Cena na vyžádání
Robot - Handling ABB IRB 4400L / 30
Transfer systems – Robot - Handling ABB IRB 4400L / 30

Cena na vyžádání
Promot EPL without a KUKA robot
Transfer systems – Promot EPL without a KUKA robot

€ 1.990,-
IAI Ultra Compact SCARA Roboter IX-NNN3515-5L-T2 mit Steuerung neu !
Transfer systems – IAI Ultra Compact SCARA Roboter IX-NNN3515-5L-T2 mit Steuerung neu !

€ 7.562,18
Rotary Assembly Machine Automatec PPRT
Transfer systems – Rotary Assembly Machine Automatec PPRT (BJ.2016)

Cena na vyžádání
Manipulator DANGO + DIENENTHAL A 10.3
Transfer systems – Manipulator DANGO + DIENENTHAL A 10.3 (BJ.1994/95)

Cena na vyžádání
KEBA ABB IRC5 SX Teach Pendant Unit-2 16/64 3HAC023195-001 /03
Transfer systems – KEBA ABB IRC5 SX Teach Pendant Unit-2 16/64 3HAC023195-001 /03

€ 2.940,34
CO