Ostatní tvářecí stroje – Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS

číslo nabídky: M67197
Cena na vyžádání
Poslat žádost
fotografie
Mandrel tube bending machine TRANSFLUID DB 628 ST / SPS - koupit použité/uploadpic/tramaofinal_inserat/bilder/67197/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/67197/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/67197/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/67197/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/67197/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/67197/bild6.jpg

umístění

Bünde bei Bielefeld Germany

výrobce

TRANSFLUID

popis

tube diameter 6 - 28 mm
wall strength 2 mm
bending radius min. 2 x D
Control IPU 20
bending radius max. 5,0 x D mm
bending angle max. 190 °
arbor length 3000 mm
operating pressure 180 bar
hydraulic motor 4 kW
weight of the machine ca. 900 kg
dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
tube diameter 6 - 28 mm
wall strength 2 mm
bending radius min. 2 x D
Control IPU 20
bending radius max. 5,0 x D mm
bending angle max. 190 °
arbor length 3000 mm
operating pressure 180 bar
hydraulic motor 4 kW
weight of the machine ca. 900 kg
dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
tube diameter 6 - 28 mm
wall strength 2 mm
bending radius min. 2 x D
Control IPU 20
bending radius max. 5,0 x D mm
bending angle max. 190 °
arbor length 3000 mm
operating pressure 180 bar
hydraulic motor 4 kW
weight of the machine ca. 900 kg
dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
tube diameter 6 - 28 mm
wall strength 2 mm
bending radius min. 2 x D
Control IPU 20
bending radius max. 5,0 x D mm
bending angle max. 190 °
arbor length 3000 mm
operating pressure 180 bar
hydraulic motor 4 kW
weight of the machine ca. 900 kg
dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
tube diameter 6 - 28 mm
wall strength 2 mm
bending radius min. 2 x D
Control IPU 20
bending radius max. 5,0 x D mm
bending angle max. 190 °
arbor length 3000 mm
operating pressure 180 bar
hydraulic motor 4 kW
weight of the machine ca. 900 kg
dimensions of the machine ca. 3,8 x 1,1 x 1,3 m
tube diameter 6 - 28 mm
wall strength 2 mm
bending radius min. 2 x D
Control IPU 20
bending radius max. 5,0 x D mm
bending angle max. 190 °
arbor length 3000 mm
operating pressure 180 bar
hydraulic motor 4 kW
weight of the machine ca. 900 kg
Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for
20 angles and display in the control panel for bending angle specification,
angle detection and angle measurement via absolute value encoder, autom. tool
plate reset, Turning device with digital display, hydr. quick chuck, aut.
Mandrel lubrication, adjustable length stops.
Operating modes: MANUAL and semi-automatic.
Control buttons: hydraulics on / off, operating mode selection, clamp to / on,
clamp forward / backward, mandrel forward / backward, bending forward /
backward / , locking forward / backward, mandrel lubrication, turning device
forward / backward, plate reset, length stop forward, emergency stop.
The machine comes from a prototype construction and was only used a little
until 2000. After that, the machines of this department were sold. However, the
purchaser did not use the pipe bending machine and therefore it has only stood
in the warehouse and has not worked since then.
Please notice that the price of a new machine today is over € 60.000,--.
Machine dealer with own stock of 1600 m².
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stav

použitý

rok výstavby

1996

Stroj pod proudem

ne
Poslat žádost

Nabídka od:

PLUM & Partner Werkzeugmaschinen GmbH

PLUM & Partner Werkzeugmaschinen GmbH
Winkelstraße 32
32257 Bünde

kontakt: Andreas Plum

Poslat žádost
Zobrazit telefonní číslo
telefon: +49 (0) 52 23 / 57 44 44
Zobrazit profil společnosti



Další zajímavé nabídky z této kategorie Ostatní tvářecí stroje

Plate Bending Machine - 4 Rolls HÄUSLER VRM HY 2000x20
Ostatní tvářecí stroje – Plate Bending Machine - 4 Rolls HÄUSLER VRM HY 2000x20 (BJ.1974)

Cena na vyžádání
3-Walzen Rundbiegemaschine, Blech-Rundwalze - SCHÄFER SRMVS
Ostatní tvářecí stroje – 3-Walzen Rundbiegemaschine, Blech-Rundwalze - SCHÄFER SRMVS (BJ.1973)

€ 12.500,-
bending machine horizontal ZOPF T 400 Multiprogramm
Ostatní tvářecí stroje – bending machine horizontal ZOPF T 400 Multiprogramm

Cena na vyžádání
Pneumatische Falzanbiegemaschine Falzmaschine zur Blechfalz Vorbiegung - FASTI 606 - 11 - 1.0
Ostatní tvářecí stroje – Pneumatische Falzanbiegemaschine Falzmaschine zur Blechfalz Vorbiegung - FASTI 606 - 11 - 1.0 (BJ.1991)

€ 850,-
bending machine horizontal RHTC PROFI PRESS HB - 28
Ostatní tvářecí stroje – bending machine horizontal RHTC PROFI PRESS HB - 28

Cena na vyžádání
bending machine horizontal A+B FASTECH FP 40
Ostatní tvářecí stroje – bending machine horizontal A+B FASTECH FP 40

Cena na vyžádání
Plate Bending Machine - 4 Rolls AK BEND AHS 15/13
Ostatní tvářecí stroje – Plate Bending Machine - 4 Rolls AK BEND AHS 15/13

Cena na vyžádání
Plate Bending Machine - 4 Rolls FALKEN 4 R HMS 1550 x 150
Ostatní tvářecí stroje – Plate Bending Machine - 4 Rolls FALKEN 4 R HMS 1550 x 150

Cena na vyžádání
bending machine horizontal A+B FASTECH FP 20
Ostatní tvářecí stroje – bending machine horizontal A+B FASTECH FP 20

Cena na vyžádání
Plate Bending Machine - 4 Rolls RAS 1520 x 3.5 mm
Ostatní tvářecí stroje – Plate Bending Machine - 4 Rolls RAS 1520 x 3.5 mm

Cena na vyžádání
CO