Bænkboremaskiner – Table, column and desk stand tapping machine SERRMAC MDR 22

Annoncer ID: M16040
Preis auf Anfrage
Send anmodning
Billeder
Kort
Table, column and desk stand tapping machine SERRMAC MDR 22 - købe brugte/uploadpic/tramaofinal_inserat/bilder/16040/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/16040/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/16040/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/16040/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/16040/bild5.jpg

Artikel beliggenhed

81475 München Germany

Fabrikant

SERRMAC

Beskrivelse

When tapping with a guide cartridge (positive feed), the tap / former is guided into the workpiece via the guide cartridge without the usual gate.
The guide cartridge must always match the pitch of the tap used.
This creates a thread with gauges from the very first thread. This system is therefore also suitable for soft material or thin-walled workpieces in order to produce as many load-bearing threads as possible.
Without a cartridge, the machine can also be used for tapping with a chamfer as with a normal drill. The functions of the switching control for right-left rotation are retained.
The extensive function cycles are unique to the SERRMAC MDR series.
(Sensor lever - single cycle - continuous cycle - continuous cycle with adjustable time delay)
The SERRMAC MDR is therefore suitable for both single threads and automated tapping systems.

Technical specifications
Tapping capacity steel St. 50 M22 mm
Spindle taper MK 3
Drilling depth 60mm
Projection 205mm
Table size 350 x 315mm (B-P), 350 x 250mm (C)
Column diameter 98mm
Variable speed control / VARIO belt drive
Spindle speeds 130 - 675 1 / min
Motor power (400 V - 50 Hz) 1.47 kW
Weight 150 kg (table), 260 kg (desk stand), 210 kg (column)

Executions
Model MDR 22 B: table version (B) with height-adjustable upper part
Model MDR 22 P: desk stand version (P) with base cabinet and tool compartment
Model MDR 22 C: column version (C) with intermediate table
Special machine: As a component of a series or rotary transfer machine

Standard equipment
Lockable main switch
Electrically locked chuck protection, height adjustable
Machined base plate with T-slots
Depth setting switchover point counter-clockwise, linear in front plate with adjusting screw
1 guide cartridge (slope of your choice)
CE declaration of conformity and operating instructions

Status

Helt ny

Maskine under strøm

Nej
Send anmodning

Tilbud fra:

Gerhard Reimann Präzisionsmaschinen Vertriebs GmbH

Gerhard Reimann Präzisionsmaschinen Vertriebs GmbH
Stockdorfer Str. 4
81475 München

Kontaktperson: Sven Reimann

Send anmodning
Vis telefonnummer
Tlf.: 089753367
Vis firmaprofil

Servicevirksomhed for :

Gerhard Reimann Präzisionsmaschinen Vertriebs GmbH



Andre interessante tilbud i denne kategori Bænkboremaskiner

Precision column drilling machine R 45 E
Bænkboremaskiner – Precision column drilling machine R 45 E

€ 12.450,-
Precision column drilling machine Serrmac R 32 E
Bænkboremaskiner – Precision column drilling machine Serrmac R 32 E

€ 8.413,-
CO