Universal fræsemaskiner – Deckel FP3A 2820 - CNC-milling machine

Artikel beliggenhed

Beskrivelse

-Lid Contour 3 CNC-Control
-Polswitchable rotary current brake motor with right / left running
-Tool tension due to plate spring package, relaxation hydraulic
-single DC motors for all axle slides
-Collision protection-Z-axis coupling
-Feed speed infinitely programmable
-Direct path measurement
-Angular table
-Central lubrication system
-partially overhauled and in very good condition
-After the lid factory acceptance protocol measure and in all points within the factory tolerances
-as with all machines of the cover FP series, almost all wear and spare parts are promptly available
-Year of construction 1988
"
}, {
"translation" : "The service was carried out according to the lid factory standard:
"
}, {
"translation" : "-renewed all guideway dispenders
-Guides of the guides are optimally adjusted
-Oil change in central lubrication and main gearbox
"
}, {
"translation" : "The following repairs / retrofits have been carried out:
"
}, {
"translation" : "-Original cover bellows with stainless steel ambels on the Z-axis has been retrofitted
"
}, {
"translation" : "Specification:
"
}, {
"translation" : "Workspace:
-X-axis (longitudinal): 400 mm
-Y-axis (transverse): 400 mm
-Z-axis without lamella cover: 400 mm
-Z-axis with lamella cover: 340 mm
-Pinolenhub vertical: 80 mm
"
}, {
"translation" : "MAIN DRIVE:
-Power: 2,0 / 3,0 kW
SHIFT GEARS:
-Spindle Speed: 40-4000 rpm
-Speed: 21
-Step jump: 1.25
TOOL HOLDER:
-recording: SK40 (M16) DIN2080, DIN 69871-A
ADVANCE DRIVE:
-metrical: 2-3600 mm / min
-Customs system: 0,08-140 in / min
-Scale metrical: 4000 mm / min
-Eilgang Inch-System: 160 in / min
WEGMESSSYSTEM:
-Resolution: 0.001 mm
-4. Axis: 0.001 °
-Input fineness metrical: 0.001 mm
-Input fineness of customs system: 0.0001 in
-4. Axis: 0.001 °
TABLE SLEDS:
-Paß-Nut-Width: 14 / H7 mm
-Screw holes for table accessories: M12
-Permissible load: 650 kg
ELECTRICAL DATA:
-Power consumption: 14.5 kW
-Operating voltage: 400 V
POINT OF VIEW:
-Surface area requirements with safety area: approx. 3,9 x 3.3 m
-Required width of the door (BxH): 1.8 x 1.8 m
-Soil load: 3000 kg / m²
-Machine weight: 1940 kg
-Weight switch cabinet: 295 kg

Status

Byggeår

Maskine under strøm