Retrofit: 2009
CNC control Heidenhain iTNC 530
The angle milling head is adjusted via the NC program
automatically.
In this case, the head is treated as a C axis and represents the angles
accordingly (to the degree) fully automatically.
X-axis (longitudinal adjustment of the table)
Lubrication: Hydrostatic lubrication
Travel distance: 6200 mm
Maximum feed speed: 15 m / min
Direct distance measuring system from Heidenhain
Y-axis (transverse adjustment of the milling support)
Lubrication: Hydrostatic lubrication
Travel distance: 3200 mm
Maximum feed speed: 15 m / min
Direct distance measuring system from Heidenhain
Z-axis (vertical adjustment of the milling spindle slide)
Travel distance: 1000 mm
Maximum feed rate: 17.5 m / min
Direct distance measuring system from Heidenhain
W-axis
Drive via two ball screws (D = 100 mm / P = 20 mm) with one each
Low-backlash planetary gearbox and hydraulic counterbalance.
Travel distance: 1500 mm
Maximum feed rate: 10 m / min
Direct distance measuring system from Heidenhain
Passage between columns
without stand covers: 2500 mm
with stand covers: 2350 mm
Passage table to portal: 2000 mm (possibly 2250) mm
Pallet size: 2000 x 3500 mm
T-slots: Longitudinal: 28 mm / Cross: 28 mm
Distance T-slots: Longitudinal: 125mm / Cross: 125mm
Max. Workpiece weight: 20,000 kg
Pallet carrier width (undercounter): 1750 mm
Pallet carrier over corridor: approx. 20 mm
Upper edge of pallet over corridor: 400 mm
Main spindle drive
Speed ??range: 5-2000 1 / min
Tool holder: SK 50
Gear stage: 4
Motor power 78 kW (25% ED)
additional units
4.1 High Speed ??- Front Mount 15 kW (SLVL 30 SZ / 1: 3)
With oil circulation cooling and internal coolant supply *
Tool holder: SK50 according to DIN69 871 part 1
Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD
Gear ratio: i = 3: 1
Max. Drive speed: n1 = 1666 1 / min
Max. Output speed: n2 = 5000 1 / min
Max. Output torque: M = 300 Nm
Max. Milling power: P = 15 kW
Angle milling head 25 kW (WFMD 150 SZ)
Automatically swiveling via main spindle
Clamping via Hirth serration; gradual division
Tool holder: SK50 according to DIN69 871 part 1
Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD
Internal coolant supply *
Gear ratio: i = 2: 1
Max. Drive speed: n1 = 600 1 / min
Max. Output speed: n2 = 600 1 / min
Max. Output torque: M = 1500 Nm
Max. Milling power: P = 25 kW
Angle milling head 18 kW (WFMD 70 SZ)
With oil circulation cooling and internal coolant supply *
Automatically swiveling via main spindle
Clamping via Hirth serration; gradual division
Tool holder: SK50 according to DIN69 871 part 1
Hydraulic tool clamp with tightening bolt according to DIN 69 872 form AD
Gear ratio: i = 2
Max. Drive speed: n1 = 1800 1 / min
Max. Output speed: n2 = 3600 1 / min
Max. Output torque: M = 700 Nm
Max. Milling power: P = 18 kW
Pallet changing system
Semi-automatic pallet changing system
Tool changer
Capacity of the tool magazine: 300 pieces SK50
Intermediate buffer with 4 tool slots
Cutting and cooling equipment
Volume of coolant tank: V = 3000 l
Wastewater treatment via belt filter system
Internal coolant supply (IKZ) with blown air through spindle center
High pressure pump (screw pump) with adjustable pressure
Pressure range: P = 5 - 60 bar
Flow rate: Qmax = 60 l / min
External coolant supply (AKZ)
Submersible centrifugal pump (20l at 2bar)
Protective and safety devices
Probe
Renishaw RMP60
Changes and errors in the technical details and information reserved.
Technische Details:
x-travel: 6200 mm
y-travel: 3200 mm
z-travel: 1000 mm
Control: Heidenhain iTNC 530
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: 12,7 x 11,0 x 6,0 m
|