Laserskæresystemer – Laser Cutting Machine ADIGE LT 8 - 3,5 kW

Annoncer ID: M67429
Preis auf Anfrage
Send anmodning
Billeder
Kort
Laser Cutting Machine ADIGE LT 8 - 3,5 kW - købe brugte/uploadpic/tramaofinal_inserat/bilder/67429/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/67429/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/67429/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/67429/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/67429/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/67429/bild6.jpg

Artikel beliggenhed

Standort Germany

Fabrikant

ADIGE

Beskrivelse

Max. diameter round tubes 220 mm
Max. side length rectangular tubes 200 mm
Max. tube length loading 8.500 mm
Max. tube length unloading 6.500 mm
Max. tube weight 35 kg / m
control Siemens Sinumerik 840 D
laser capacity in Watt 3500
Max. diameter round tubes 220 mm
Max. side length rectangular tubes 200 mm
Max. tube length loading 8.500 mm
Max. tube length unloading 6.500 mm
Max. tube weight 35 kg / m
control Siemens Sinumerik 840 D
laser capacity in Watt 3500
Max. diameter round tubes 220 mm
Max. side length rectangular tubes 200 mm
Max. tube length loading 8.500 mm
Max. tube length unloading 6.500 mm
Max. tube weight 35 kg / m
control Siemens Sinumerik 840 D
laser capacity in Watt 3500
Max. diameter round tubes 220 mm
Max. side length rectangular tubes 200 mm
Max. tube length loading 8.500 mm
Max. tube length unloading 6.500 mm
Max. tube weight 35 kg / m
control Siemens Sinumerik 840 D
laser capacity in Watt 3500
Max. diameter round tubes 220 mm
Max. side length rectangular tubes 200 mm
Max. tube length loading 8.500 mm
Max. tube length unloading 6.500 mm
Max. tube weight 35 kg / m
control Siemens Sinumerik 840 D
laser capacity in Watt 3500
Max. diameter round tubes 220 mm
Max. side length rectangular tubes 200 mm
Max. tube length loading 8.500 mm
Max. tube length unloading 6.500 mm
Max. tube weight 35 kg / m
control Siemens Sinumerik 840 D
Laser source: ROFIN SINAR DC 035 3500 Watt
The LT8 system is equipped with a Rofin Sinar Slab laser from the DC series, which, thanks to the following features, enables optimum cutting quality at low operating costs:
- High radiation index (K factor 0.9)
- No moving parts, therefore very low maintenance costs
- Minimal gas and electricity consumption.
Control
Siemens Sinumerik 840D Solution Line
Tube parameters
- Max. diameter round tubes: 220 mm
- Max. side length rectangular tubes: 200 mm
- Max. tube length loading: 8.500 mm
- Max. tube length unloading: 6.500 mm
- Max. tube weight: 35 kg / m
Seamline detection
The LT8 is equipped with optical seamline detection for the correct positioning of the machining.
Irregular cross sections and open profiles
Thanks to the effective and efficient processing of irregular cross sections and open profiles, LT8 is also suitable for innovative applications.
Booster
Inspection and management of the cutting process are also guaranteed with the LT8 by means of highly developed devices - including the booster device for optimal laser piercing.
3D
With large pipes, three-dimensional machining is a decisive criterion for the performance of a system. The LT8 has a 3D head for angle cutting with the highest quality and accuracy.
Technological database
LT8 users can rely on a complete, reliable and based on ADIGE's many years of experience in laser cutting technological database benefit from cutting parameters.
Nesting
Thanks to special functions such as online nesting, remnant optimization and reduction and entire bar processing, the bar is used optimally.
2 IN
Two different loading stations guarantee more flexibility in the management of production lots. The system can be set up for processing open profiles and flat material in an automatic process; Two automatic loading stations, front and rear, both equipped with measuring sensors; Three possible loading designs available (bulk loader, loading table for individually manually stored bars, step loader). Each loader can be connected to any tube loading station and is available in the 8500 mm version; Two different cross-sections can be managed simultaneously using the by-pass function; There are additional protective elements in the machine for processing heavy pipes or stainless steels provided to avoid possible damage to the pipe surface.
4 OUT
Four unloading positions for separate unloading of the cut pieces. The use of specially developed software processes allows the rod to be optimized and used, thereby reducing the final waste to only 110 mm. Four possible unloading positions for sorting out the different cut parts. Parts are supported by universal supports at every production step - for extremely precise machining even of long, heavy and / or complex parts. Reduced cycle times and intactness of the pipe surface are guaranteed by the special extraction pliers on the unloader.
Machine hours:
approx. 46.000 h / 23.000 h (June 2020)
YouTube-Video-Link:
https: / / www.youtube.com / watch?v=5ZCZcALKcKk
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Status

Brugt

Byggeår

2014

Maskine under strøm

Nej
Send anmodning

Tilbud fra:

Bästlein Gebrauchtmaschinenhandel GmbH

Bästlein Gebrauchtmaschinenhandel GmbH
Augsburger Str. 56
89312 Günzburg

Kontaktperson: Thomas Bästlein

Send anmodning
Vis telefonnummer
Tlf.: +49 8221 93037-0
Vis firmaprofil



Andre interessante tilbud i denne kategori Laserskæresystemer

Laser Cutting Machine HESSE by DURMA HD-TC 60170
Laserskæresystemer – Laser Cutting Machine HESSE by DURMA HD-TC 60170

€ 376.200,-
MAZAK SPACE GEAR 510 Mark II 2D/3D
Laserskæresystemer – MAZAK SPACE GEAR 510 Mark II 2D/3D

Preis auf Anfrage
Laserschneidmaschine (CO2): GWEIKE LF 3015 GA CNC
Laserskæresystemer – Laserschneidmaschine (CO2): GWEIKE LF 3015 GA CNC (BJ.2021)

€ 80.000,-
2013 Durma VS 4020
Laserskæresystemer – 2013 Durma VS 4020 (BJ.2013)

Preis auf Anfrage
Laser Cutting Machine TRUMPF TruLaser 3030
Laserskæresystemer – Laser Cutting Machine TRUMPF TruLaser 3030 (BJ.2007)

Preis auf Anfrage
Trumpf Trulaser 3040
Laserskæresystemer – Trumpf Trulaser 3040

Preis auf Anfrage
Coherent Laserstrahlquelle AVIA 355-X mit PC
Laserskæresystemer – Coherent Laserstrahlquelle AVIA 355-X mit PC

€ 7.500,-
Laser Cutting Machine TRUMPF TRUMATIC L 3040 - 4 kW
Laserskæresystemer – Laser Cutting Machine TRUMPF TRUMATIC L 3040 - 4 kW (BJ.2006)

Preis auf Anfrage
Laserschneidmaschine (CO2): AMADA LCV 3015 3KW + Automation/storage
Laserskæresystemer – Laserschneidmaschine (CO2): AMADA LCV 3015 3KW + Automation/storage (BJ.1998)

€ 29.000,-
Laser Cutting Machine BYSTRONIC Bystar 4025
Laserskæresystemer – Laser Cutting Machine BYSTRONIC Bystar 4025 (BJ.2000)

Preis auf Anfrage
CO