Machines d'occasion: Construction

Capacity: 500l, working pressure: -1 to 2 bar, the boiler was used to make hair dyes, eyebrow and eyelash paints, 2019 - repair homogeniser, including motor shaft, motor overhaul, new slide ring, all ...

ATLAS 55 Radlader. Der auf vielen Baustellen gerne gesehene Atlas Radlader punktet mit geringen Betriebsstunden, einer Kabine mit sehr guter Rundumsicht, einer guten Geländefähigkeit aufgrund des ...

Caterpillar C175-16 Stromaggregat, Electricity Generator
Diesel
3000/3300 kVA Standby, 3000 kVA Prime
Voltage 415


Subject to change, error and intermediate ...

Caterpillar 3516B Stromaggregat, Electricity Generator
Diesel
2000/2250 kVA Standby, 2000 kVA Prime


Subject to change, error and intermediate sale.

CUMMINS KTA50G8 Stromaggregat, Electricity Generator
Diesel
1500/1675 kVA Standby, 1500 kVA Prime


Subject to change, error and intermediate sale.

Controls: Siemens SIMATIC C7-623.

Ref.Nr.: INNO24784

Max. capacity: 365l/400kg, motor power: 11kW, weight: 1.7t.

Ref.Nr.: INNO24768

Transportwagen

MicroJet Schiebeanleger MJ 45 A mit MicroJet Transportband

'-Winkel 45°
-Bandbreite 000mm
-höhenverstellbar

Späneband Gerhard Busch KF 110

 


Das Förderband läßt sich entsprechend den räumlichen Verhältnissen links- oder rechtsseitig fördernd oder auch gerade ...

Winkel 90°
Bandbreite 500mm
Rechtslaufend
höhenverstellbar

Nachrüstung mit Frequenzumrichter gegen Aufpreis möglich

2 Stück verfügbar

Winkel 180°
Bandbreite 400mm
Breite der Kurve aussen (Abstand von Rand zu Rand) 187cm

Transnorm Kurvenband - Kurvengurtförderer 180°
Bj. 2008

Winkel 180°
Förderhöhendifferenz 400mm ( durch verstellbare Füße)
Bandbreite 600mm
Nennradius ...

GUK Wendetisch
aus 2009

mobil
höhensverstellbar
frequenzgesteuert

Microjet höhenverstellbarer, frequentgeregelter  Saugbandtisch

zum Adressieren
Länge ca. 1600m
Einlaufbreite ca 85.cm

Paketlogistik Versandraumhandling Vakuum - Schlauchheber Schmalz Jumbo 50

mit
Schwenkarm zur Wandmontage Traglast 80 kg,
Ausleger ca. 3,5 m
Schalldämmbox für ...

Frequenzgesteuertes Transportband 

ca. 220x50cm

Späneförderer - Spänetransportband Buschgraph Busch SF 145-50 P
Bj. 2010
für den Abtransport von Schneid- und Stanzabfällen in Container
Förderhöhe 145cm

Späneband Hilfsförderband Busch HF 35
aus 1999

gerade revidiert (neues Band)

V-belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency
Container with a stoved inner coating
Standard ...

Long-lived, V-belt-driven compressor blocks
Electronic control AIR ENERGY CONTROL 3 with rotary direction control, display of operating hours, service charges, load hours, etc.
...

Auf dem Stautaktförderer mit 4 Stationen werden bei Bedarf Pakete, Zeitungs-,
Zeitschriften- und ähnliche Stapel-Druckprodukte aufgestaut und nach
Freigabe zeitverzögert ...

Winkel 90°
Bandbreite 500mm
höhenverstellbar
Lenze Getriebemotor

Optional können Fequenzumrichter
nachgerüstet werden

mobile höhenverstellbar Gura Scheren-Rollenbahn 1200-425 2KUX
aus Bj. 2009

Scheren-Rollenbahnen finden in allen Bereichen des Stückguttransportes im Betrieb Anwendung.

Number of axles 2 St.
length 7,7 m
total wight 20 t
axis load in front 10 t
axis load in the back 10 t
width 2,5 m
Number of axles 2 St.
length 7,7 m

blower power 19 kW
motor .
bucket Diesel .
blower power 19 kW
motor .
bucket Diesel .
blower power 19 kW
motor .
bucket Diesel .
blower power ...

Number of axles 2 St.
total wight 32,5 t
axis load in front 9 t
axis load in the back 9 t
tire equipment 385/65R22,5 .
Number of axles 2 St.
total wight 32,5 t

Details:
Condition: Used
Location: Ennepetal - Hall 1
Delivery Terms: immediately
Quotation: Pickup

Details:
Condition: NEW
Delivery Terms: by agreement
Quotation: Free on truck from location

volumn: 0,15 m³
weight: 95 kg

Technical ...

Details:
Origin: Germany
Condition: Used
Location: Ennepetal - Hall 1
Delivery Terms: immediately
Quotation: From stock - free on truck

Lifting height: ...

Details:
Condition: NEW
Delivery Terms: by agreement
Quotation: Free on truck from location

volumn: 0,30 m³
weight: 95 kg

Technical ...

Details:
Location: Ennepetal - Hall 3
Delivery Terms: by agreement
Quotation: From stock - free on truck

weight: 313 kg
weight max. in kg: 1350 kg

Details:
Condition: NEW
Location: Ennepetal - Hall 3
Delivery Terms: immediately
Quotation: Package shipping

Steel winch SW3
Load capacity: 3000kg
Dead ...

Details:
Condition: Used
Location: Ennepetal - Hall 3
Delivery Terms: available immediately
Quotation: Package shipping

Details:
Origin: Turkey
Condition: NEW
Location: Ennepetal
Delivery Terms: by agreement
Quotation: From stock - free on truck

length: NACH WUNSCH mm

length 1980 mm
width 670 mm
height over floor 850 mm
length 1980 mm
width 670 mm
height over floor 850 mm
length 1980 mm
width 670 mm
height over floor ...

1 used concrete trowel, power trowel with 1 set of blades and 1 plate dia 37" for concrete scraping - unused!

6,5 HP Loncin motor with 196 CC
adjustable handle

Seitenkippschaufel gebraucht

Abmessungen ca.:
Schneidenlänge 2120 mm
Höhe 950 mm
Tiefe Schaufel innen 800 mm
Gesamttiefe 1300 mm
Bolzendurchmesser 50 mm

concrete grinding machine Besto BS 600E
electric 400 V
2 grinding-wheels
working-width appr. 600 mm
vacuum cleaner connector

Power: 15.4kW, weight: 2.7t, operational hours counter: 845h, with accessories.

Ref.Nr.: INNO24322

Machine was not used in 20 years.

Ref.Nr.: INNO24299

Including machine feed, board feed, washing system, after-treatment (rinsing, blowing off), lifting ladder, travelling platform, lowering ladder, board return transport, centering device, doppler, ...

Bed dimensions: 1400x950mm, max. product height: 140mm, including machine feeder, board feeder, coating line, lifting ladder, travelling platform, lowering ladder, collator, granulate spreader, ...

Max. output: 108.8 ml/stroke, speed: 5-6 stroke/min, capacity: 2x 20l, with documentation, machine was hardly used.

Ref.Nr.: INNO24075

Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm

Technical data:
weight of machine: 170 kg

Dimensions see picture / drawing, height + inclination adjustable, height of cleats 15 mm, splitting of cleats 300 mm

Technical data:
weight of machine: 170 kg

semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply

Technical data:
cutting diameter: 100 mm
saw ...

There are one CANNON A System 100 Pro and one CANNON A-10 System Servo available, year of construction machine 1/ 2: 1995/ 2002, including documentation.

Ref.Nr.: INNO23915

Max. container weight: 40kg, container height: 60-450mm, clamping plate diameter: 350mm, length: 720mm, width: 610mm, height: 1160mm, weight: 185kg.

Ref.Nr.: INNO23724