Table milling machine – Hofmann TFS 107

Αναγνωριστικό εμφάνισης: M77484
Τιμή κατόπιν αιτήματος
Στείλε αίτημα
εικόνες
Hofmann TFS 107 - για να αγοράσετε μεταχειρισμένο/uploadpic/tramaofinal_inserat/bilder/77484/1.jpg

Τοποθεσία μηχανήματος

Germany

περιγραφή


Our "Little Big"-a lot of machine for little money!

100% Made in Germany offers this milling cutter with optimum basic equipment at an interesting price: It has a swivel range of -45.5 ° to +45.5 °, motor spindle adjustment for height and angle with LED displays, 7.5 kW motor with 4 speeds, left / right of the spindle and much more.

The perfect basis for reliable work.

Equipment

Basic equipment table size 1.200 x 815 mm, strongly ribbed cast table, fine planed; machine height 890 mm table rings 262 / 220 / 160 / 115 mm ØFest built-in milling spindle with milling mandrel (not replaceable) Ø 30 mm incl. Quick-release nut "fix" (for quick, comfortable tool change-without spindle locking), clamping length 140 mmElectric height adjustment of the milling spindle approx. 145 mm in the Eil-and creeping corride,

LED display on 1 / 10 mm, with switch-over option Absolute dimension / chain-scale swivel adjustment of the milling spindle from -45.5 ° to +45.5 ° in the case of the Eil-and Schleichgang,

LED display at 0,1 °Powerful 7.5 kW Motor4 speeds 3.000 / 4.500 / 6.000 / 9.000 via step-pulley speed display-Electronic starting and braking device left / right running, right-handed operation via two-handed operation with warning display panel clearly in the machine stand integrated milling cutter type 2601 Efficient. Total adjustment via handwheel according to digital counter and jaw fine adjustment of the inlet jaw via cylinder rotary knob on a scale to 0.1 mm with multiplex stop jaws (After lifting the stop, the complete table is freely available after reconstruction does not have to be carried out) Machinery outlet CEE-16A6h secured with plug for the advancing apparatus. One / Austaster for this in the switch panel 2 suction nozzles 120 mm Ø at the stop and below the table accessory: HOFMANN milling protection "Centrex", sheet milling protection Tapoa for milling at the starting ring with suction connection piece, operating tool, grease press, operating instructions

 

OptionalMilling beat Type 2620

(instead of standard strike type 2601 Efficient)

With LCD display, dual clamping and quick-action clamping system for the stop jaws
AIR-LOCK for milling stroke type 2620

Stop jaws are pneumatically released and clamped and the clamping is monitored
HOFMANN Guardian (Patent)

No spindle start possible if the stop jaws are not clamped
Rolling table

Complete with eccentric tensioner and protective hood (for tool Ø of 250-350 mm)

Height-adjustable, retractable to the spindle as well as foldable, as table extension

When using the protective hood speed max. 4,500 rpm.
Longitudinal stop 1,750 mm

Longitudinal stop 2,750 mm

Option "longitudinal stop" only with roller table

Optional extendable edition of 480 mm for standard table, with NOT-OFF button

Table extension on one side to the right of 750 mm incl. Extendable edition by 480 mm

Table size 2,000 x 815 mm incl. Extendable edition by 480 mm

Table extension on both sides, at 2,700 mm incl. extendable edition by 480 mm

Variable speed from 1,500 to 10,000 rpm (in 100er or 1000er gradation)

Milling stroke type 2601 Efficient with LCD display (with switch-over option to tool zero), instead of digital counter

Turn-off device for milling

Cast impact jaws

Safety rulers anodized (5 pieces) and wooden board to the casting jaws

Integral impact jaws 500 / 650 or 650 / 650 mm

Filler rod and spacer, to the integral stop jaws

Interchangeable spindle MK5 incl. Milling mandrel Duo Ø 30 mm with quick release nut

Milling mandrel MK5 Duo Ø 40, 50 mm or 1 ¼ " for interchangeable spindle

Pliers for MK 5 of diameter 3-25 mm

Feed apparatus type 408

Infinitely variable speed control for the feeding apparatus (operating elements in the control panel)

Feed stand console

Switching pulls up

Tool compartment (switching desk top is a prerequisite)

Arc milling master, instead of chip removal and milling protection device Tapoa

Non-return protection for insertion milling with 2 infinitely adjustable mounting shafts

Check protection for insertion milling without fastening shafts

Counter-stop with counting tubes, for exact milling on format

Adjustment range 90 mm, Standard diameter 165 mm

Safety light bar at the cutting edge

when the spindle is running, warning lights on the stop Milling stop 2620 is a prerequisite

Operating Hours Count

Sliding carriage incl. Eccentric tensioner (For the construction on the machine table)

Protective hood for sliding carriage (for tool Ø from 250 to 350 mm)

Technical data

Please contact us for more information.

*Source https: / / hofmann-maschinen.de / produkte / frasen /

*Prices from stock Remscheid. Depending on the manufacturer, additional transport costs can be incurred up to our warehouse. Intermediate sale reserved for single pieces. Errors and changes in the technical characteristics are reserved. Images can include optional special equipment.

Keep in mind that the advertisement was translated automatically and may have errors. We are not responsible for these errors.

Κατάσταση

Ολοκαίνουργιο

Έτος κατασκευής

2022

Machine under power

Οχι
Στείλε αίτημα

προσφορά από:

Maschinen Kaiser GmbH

Maschinen Kaiser GmbH
Tenter Weg 214
42897 Remscheid

Επικοινωνία: Sven Kaiser

Στείλε αίτημα
Εμφάνιση αριθμού τηλεφώνου
Τηλεφωνικό νούμερο: 02191 - 95129 0
Εμφάνιση προφίλ εταιρείας



Άλλες ενδιαφέρουσες προσφορές σε αυτήν την κατηγορία Table milling machine

Table Milling Machine ELEKTRA BECKUM TF 100 M 2,8 DN
Table Milling Machine ELEKTRA BECKUM TF 100 M 2,8 DN (BJ.1998)

Τιμή κατόπιν αιτήματος
SCM milling T105
Table milling machine – SCM milling T105 (BJ.2022)

Τιμή κατόπιν αιτήματος
Tischfräse Stehle F3
Table milling machine – Tischfräse Stehle F3

Τιμή κατόπιν αιτήματος
CO