Μεταχειρισμένα μηχανήματα: Automation & Robotics

Including controls, the robot needs overhauling.

Ref.Nr.: INNO24885

Memory: 128MB, including controls.

Ref.Nr.: INNO24884

This FANUC M-20iB Robot was built in the year 2017 in Japan and has 200 hours. The robot Includes a 2D camera and a 3D camera.
General Data
Machine weight: 120 kg

Additional ...

This KUKA KR180 R3200PA Robot was made in the year 2018. The robot has 5 axis, a maximum reach of 3195 mm, and a nominal load capacity of 180 kg. 2 robots are available: Robot 1: 45.37 hours.

This ABB IRB 2400 M2000 Robot was manufactured in the year 2004 in Sweden and has 49312 production hours.
General Data
Machine weight: 350 kg

Media
Main electronic ...

This Yaskawa Motoman YR-MH005LS-A12 Robot was manufactured in the year 2013 in Japan. The machine has a payload of 5kg and a Pneumatic max pressure of 490 kpa.
Media
Main electronic ...

This Yaskawa Motoman YR-MH005LS-A12 Robot was made in Japan. The machine has a payload of 5 kg.
Media
Main electronic connection: 3x400 V / 50-60 Hz


Machine Benefits

This ABB IRB 2600 M2004 robot was built in Sweden in 2013.
General Data
Machine weight: 272 kg


Machine Benefits
Technical Machine Benefits:
- Excl flex ...

This ABB IRB 2600 M2004 robot was made in Sweden in 2013.
General Data
Machine weight: 272 kg


Machine Benefits
Technical Machine Benefits:
- Excl flex ...

This MOTOMAN UP20-6 MT1-1000 TRDS-1150 industrial welding robot was built in 2003 in Sweden and has 1900 hours. It is equipped with a Motoman XRC robot controller and has a 6 + 3 axis. The robot has a ...

This FANUC M20iA12L 6-axis robot + Fanuc iR Vision was made in the year 2019 and has 500 hours. It is controlled by R-30iB Plus. The robot has a repeatability of ± 0.03* and a Robot footprint of 343 ...

This Fanuc LR Mate 200iD/4S Robot was manufactured in the year 2016. It is equipped with a FANUC System R-30iB Mate control unit and has 6 axis. The machine has a max. reach of 550 mm.
Control ...

This Carl Cloos Romat 310 C-Stander WPV-DP-5000N welding robot was built in the year 1994 in Germany.

This Yaskawa YR-MH005LS-A12 Robot was manufactured in the year 2012 in Japan. It is equipped with a MOTOMAN YKS-002E control unit. The machine is fully functional robot in a cell, Interface prepared ...

This IMSTec GmbH AMC Robot was manufactured in the year 2012 in Germany. It is equipped with a Beckhoff control unit and has 6 axis.
General Data
Measurements width: 3400 mm

This KUKA KR150L150SP/2 Robot was manufactured in 2001. The robot has a capacity of 150 kg, and an arm reach of 2700mm.

Machine Benefits
Technical Machine Benefits:
- ...

Including documentation, spare parts and various feeders.

Ref.Nr.: INNO24692

Including documentation, spare parts and various feeders.

Ref.Nr.: INNO24691

number of controlled axis 6
workpiece weight . kg
throat . mm
Control System R-J
Number of working hours 38217 h
total power requirement kW
weight of the machine ...

weight max. 3000 kg
stroke 450 mm
speed 85 m/min
total power requirement 45 kW
weight of the machine ca. 15,7 t
dimensions of the machine ca. 4,8x2,34x3,65 m
weight ...

stroke . mm
weight max. 300 kg
speed . m/min
total power requirement . kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. . m
stroke . mm
weight ...

weight max. 12 t
work piece width 880 mm
total power requirement 130 kW
weight of the machine ca. 63,3 t
weight max. 12 t
work piece width 880 mm
total power ...

weight max. 1600 kg
Drive Diesel
motor Deutz
weight 13,6 t
weight max. 1600 kg
Drive Diesel
motor Deutz
weight 13,6 t
weight max. 1600 kg

weight max. 1000 kg
workpiece length . mm
work piece width . mm
Drive elektr.
total power requirement kW
weight of the machine ca. t
dimensions of the machine ...

weight max. 1000 kg
workpiece length . mm
work piece width . mm
vice capacity 15 KN
rotation movement 0-35 U/min
Speed 0-90 m/min
total power requirement 22 kW

weight max. 1750 kg
workpiece length 7800 mm
work piece width . mm
total power requirement 30 kW
weight of the machine ca. 15 t
dimensions of the machine ca. m

weight max. 800 kg
workpiece length . mm
work piece width . mm
stroke 500 mm
total power requirement . kW
weight of the machine ca. 5 t
dimensions of the machine ...

Pneumatic clamping arm
Leveller RM-18-200CEDecoiler
sheet width max:   450 mm
max. weight of coil:   4 to

Decoiler
sheet width max:   250 mm
max. weight of coil:   2 to
max. diameter of coil:   1400 mm
mandrel expansion range from:   400 ...

Overall Specifications (coil lines)
sheet width max:   600 mm
sheet thickness max:   4 mm
feed velocity max.:   32 m/min
feedstock transport ...

number of controlled axis 6
workpiece weight Unbkt kg
throat bis 8000 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m

number of controlled axis unkt.
workpiece weight unbkt kg
throat unbkt. mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
number ...

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis unbkt.
workpiece weight unbkt. kg
throat unbkt. mm
total power requirement unbkt. kW
weight of the machine ca. t
The data for this ad was ...

number of controlled axis -
workpiece weight - kg
throat - mm
total power requirement - kW
weight of the machine ca. t
dimensions of the machine ca. m
number of ...

number of controlled axis unbek.
workpiece weight unbek. kg
throat mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m

Details
number of controlled axis:6
workpiece weight:30 kg
throat:2430 mm
total power requirement:7,8 kVA
weight of the machine ca.:1060 t
dimensions of the ...

Number of axes: 6, reach: 700mm, load: 3kg, with controls.

Ref.Nr.: INNO24339

There are 13 Welding Robots KUKA available, machines: 5x KR125/1, 2x KR125/2, 3x KR150/2 TJ, 1x KR60-3, 1x KR150/ 2, 1x KR150-2TJ, with control cabinet and controls, there are additionally 12 ...

Coil car, double decoiler AH5000/750/2/MSG-4Q, working left-right direction, expansion hydraulic, hydraulic press arm, hydraulic pressure roller, drive / braking DC motor, straightener RM 5075.4 / 9, ...

Decoiler with coil lifter, hydraulic available, transverse movement electromechanical, main drive/braking with hydraulic motor/disc brake, pressure roller with hydraulic motor, press arm hydraulic, ...

Decoiler DREHER 2370D/MO/FPS
Pneumatic clamping arm. Hydraulic mandrel expansion.

Straightening machine DREHER 1676D/11FQDecoiler
design:  single reel
sheet ...

Suitable for conveying bayonet rings, pneumatic supply: 6bar, with documentation.

Ref.Nr.: INNO24180

Including documentation.

Ref.Nr.: INNO24120