Piallatrici per lo spessore – Straightening and Dickenhobelmaschine: HOFMANN | AD 515

ID display: M77594
Prezzo su richiesta
Invia richiesta
immagini
Straightening and Dickenhobelmaschine: HOFMANN | AD 515 - comprare usato/uploadpic/tramaofinal_inserat/bilder/77594/HoffmannAD.jpg

Posizione dell'oggetto

Germany

descrizione

Description

Alone strong, too two unbeatable!

Without a doubt, the combination of the thickness and the Abrichthobelmaschine allows both operations to be performed without changing the tables-even at the same time.

In addition, it is possible to fold the dressing tables up and down in any position of the thickness table.

If the machine is to be converted to the thickness of the machine, the two dressing tables are spring-supported upwards.

Set the thickness of the dick-FINISHED!

Working width AD 515: Ripped 480 / Dicks 505 mm

Working width AD 635: Rims 610 / Dicken 625 mm

Equipment

Basic Equipment Sled Casting Machine Width AD 515 Trimming 480 Thick 505 mmHobel Width AD 635 610 Dicks 625 mmSpanabException Abrichte / Dicken: 4 / 8 mmHobelheight ca. 3.5-245 mm-dressing tables, length AD 515 / AD 635 2.400 / 2.500 mm, highly ribbed Gusst finest high-performance, powerful 5.5 kW-MotorTersa knife shaft with 4 blade-toothed steel tipping-replacement stop over the entire width adjustable and adjustable up to 45 °, with one-hand operation. Quick adjustment for chip removal Abrichte; scale for workpiece thickness at the stop. Auxiliary stop in the stop integrated thick table 4-fold guided; length 1.000 mm with extension on both sides at 1,600 mmTwo central operating units for straightening and thickness work. Electrical thickness adjustment with push-buttons for the adjustment in the elawing or creeping motion, as well as adjustment to 1 / 10 mm exactly; integrated operating hour counter. Additional scale for work piece strength in rubber 2 feed speeds 7 + 14 m / min; also electrically switchable during planing thickness also without folding up the dressing tables, for this purpose integrated extractor hood protection device TX GL, cover abratching2 suction pipe socket Ø 160 mm, slide for suction-integrated accessory accessories: 1 set of knives installed, operating tool, grease press, operating control paint: grey white, achatgrey, signal blue, white aluminium AD "lift"
Pneumatic lifting and lowering of the dressing tables at the push of a button

OptionalInstead of Tersa-Messerwelle:
HELIX knife shaft

Wedge-strip shaft (incl. 2 screwable single-digit watches) only for AD 635Instead of 5.5 kW:
Motor power 7,5 kW (10 hp)-400 V, 50 HzInstead of 2 feeding speeds:
Infinitely variable feed 4-22 m / min Instead of rubber infeed roller:
Steel intake roller (sawtooth) link roller link roller
Positioning control for the thickness of the thick table
Sensor monitoring for positioning control via light barrier (no dead man circuit)
Mounted table 1.000 or 2.000 mm long, galvanized surface, with constant height adjustment and stand foot
SUVAMATIC knife shaft protection, instead of protection TX G
Telescopic slide bar (push rod can be inserted, shortened thereby (space saving approx. 200 mm)
2 sliding rollers in the thick table (predominant processing of wet or hard wood)
Please note that all possible accessories are listed here, without restriction or restriction. Testing for technical feasibility for the individual machine type.

Technical data

Please contact us for more information.

*Source https: / / hofmann-maschinen.de / produkte / hobeln / abrichtdickenhobelmaschine /

*Prices from stock Remscheid. Depending on the manufacturer, additional transport costs can be incurred up to our warehouse. Intermediate sale reserved for single pieces. Errors and changes in the technical characteristics are reserved. Images can include optional special equipment.

Keep in mind that the advertisement was translated automatically and may have errors. We are not responsible for these errors.

stato

Nuovo di fabbrica

Anno di costruzione

2022

Macchina sull'elettricità

no

Costi operativi

Beschreibung

Alleine stark, zu zweit unschlagbar!

Zweifellos einmalig ermöglicht die Kombination aus Dicken- und Abrichthobelmaschine beide Arbeitsgänge ohne Umstellen der Tische – sogar gleichzeitig.

Ein Auf- und Zuklappen der Abrichttische ist zudem in jeder Position des Dickentisches möglich.

Wenn die Maschine doch einmal zum dickenhobeln umgebaut werden soll, schwingen beide Abrichttische federunterstützt nach oben.

Dickenhaube auflegen – FERTIG!

Arbeitsbreite AD 515: Abrichte 480 / Dicken 505 mm

Arbeitsbreite AD 635: Abrichte 610 /Dicken 625 mm

Ausstattung

GrundausstattungBewährte GussausführungHobelbreite AD 515 Abrichte  480  Dicken 505 mmHobelbreite AD 635 Abrichte 610 Dicken 625 mmSpanabnahme Abrichte/Dicken: 4/8 mmHobelhöhe ca. 3,5-245 mmAbrichttische hochklappbar, Länge AD 515/AD 635 2.400/2.500 mm, stark verrippte Gusstische feinst gehobeltLeistungsstarker 5,5 kW-MotorTersa-Messerwelle mit 4 MessernGezahnte Stahltischlippen – auswechselbarAbrichtanschlag über die gesamte Breite verstellbar und bis 45° schrägstellbar, mit Einhandbedienung. Schnellverstellung für Spanabnahme Abrichte; Skala für Werkstückdicke am Anschlag. Hilfsanschlag im Anschlag integriertDickentisch 4-fach geführt; Länge 1.000 mm mit beidseitiger Verlängerung auf 1.600 mmZwei jeweils zentrale Bedieneinheiten für Abricht- und Dickenarbeiten. Elektrische Dickentischverstellung mit Tastern für die Verstellung im Eil- oder Schleichgang, sowie Verstellung auf 1/10 mm genau; integrierter Betriebsstundenzähler. Zusätzliche Skala für WerkstückstärkeEin- und Auszugswalze in Gummi2 Vorschubgeschwindigkeiten 7 + 14 m/min; elektrisch umschaltbar auch während des HobelnsDickenhobeln auch ohne Hochklappen der Abrichttische, dazu am Abrichtanschlag integrierte AbsaughaubeHobelschutzvorrichtung TX GL, Abdeckung abklappbar2 Absaugstutzen Ø 160 mm, Schieber für AbsaugungIntegriertes ZubehörfachZubehör: 1 Satz Messer eingebaut, Bedienwerkzeug, Fettpresse, BedienungsanleitungLackierung: grauweiß, achatgrau, signalblau, weißaluminiumAD „lift“
Pneumatisches Heben und Senken der Abrichttische auf Knopfdruck

OptionalAnstatt Tersa-Messerwelle:
HELIX Messerwelle

Keilleistenwelle (inkl. 2 aufschraubbare Einstellehren) nur für AD 635Anstatt 5,5 kW:
Motorstärke 7,5 kW (10 PS) – 400 V, 50 HzAnstatt 2 Vorschubgeschwindigkeiten:
Stufenloser Vorschub 4-22 m/minAnstatt Gummieinzugswalze:
Stahleinzugswalze (Sägezahn)GliedereinzugswalzeGliederdruckbalken
Positioniersteuerung für die Dickentischeinstellung
Sensorüberwachung für Positioniersteuerung über Lichtschranke (keine Totmannschaltung)
Anbautisch 1.000 oder 2.000 mm lang, Oberfläche verzinkt, mit gleichlaufender Höhenverstellung und Standfuß
SUVAMATIC-Messerwellenschutz, anstatt Schutz TX G
Teleskopschiebestange (Schiebestange einschiebbar, dadurch verkürzt (Platzersparnis ca. 200 mm)
2 Gleitwalzen im Dickentisch (überwiegender Bearbeitung von nassem oder harzigem Holz)
Bitte beachten Sie, dass hier alles mögliche Zubehör aufgeführt ist, ohne Einschränkung bzw. Prüfung auf technische Realisierbarkeit für den einzelnen Maschinentyp.

Technische Daten

Bitte kontaktieren Sie uns für weitere Infos.

*Quelle https://hofmann-maschinen.de/produkte/hobeln/abrichtdickenhobelmaschine/

*Preise ab Lager Remscheid. Je nach Hersteller können zusätzliche Transportkosten bis zu unserem Lager anfallen. Zwischenverkauf bei Einzelstücken vorbehalten. Irrtümer sowie Änderungen der technischen Eigenschaften vorbehalten. Bilder können optionale Sonderausstattungen enthalten.
Invia richiesta

Offerta da:

Maschinen Kaiser GmbH

Maschinen Kaiser GmbH
Tenter Weg 214
42897 Remscheid

contatto: Sven Kaiser

Invia richiesta
Mostra il numero di telefono
Tel.: 02191 - 95129 0
Mostra il profilo aziendale



Altre offerte interessanti in questa categoria Piallatrici per lo spessore

Abrichthobelmaschine Kirchner Leipzig
Piallatrici per lo spessore – Abrichthobelmaschine Kirchner Leipzig

€ 1.900,-
Planing Machine - Double Column WALDRICH-COBURG 6DD4036S,6mHL
Piallatrici per lo spessore – Planing Machine - Double Column WALDRICH-COBURG 6DD4036S,6mHL (BJ.1962)

Prezzo su richiesta
Straightening and Dickenhobelmaschine: SCM | L' invincibile fs 7
Piallatrici per lo spessore – Straightening and Dickenhobelmaschine: SCM | L' invincibile fs 7 (BJ.2022)

Prezzo su richiesta
Unrip
Piallatrici per lo spessore – Unrip

€ 3.000,-
Dressing Grinder REISHAUER AM
Piallatrici per lo spessore – Dressing Grinder REISHAUER AM

Prezzo su richiesta
Weinig Unimat 22A mit autom. Zuführung thickness planer
Piallatrici per lo spessore – Weinig Unimat 22A mit autom. Zuführung thickness planer

Prezzo su richiesta
Feinhobelmaschine Weinig Uniplan 23
Piallatrici per lo spessore – Feinhobelmaschine Weinig Uniplan 23

Prezzo su richiesta
CO