Torni convenzionali – lathe-conventional-electronic OPTIMUM OPTIturn TH 3309D

ID display: M81778
Prezzo su richiesta
Invia richiesta
immagini
mappa
lathe-conventional-electronic OPTIMUM OPTIturn TH 3309D - comprare usato/uploadpic/tramaofinal_inserat/bilder/81778/bild1.jpg

Posizione dell'oggetto

49779 Niederlangen Germany

Fabbricante

OPTIMUM

descrizione

turning diameter 330 mm
turning length 830 mm
swing diameter over bed slide 196 mm
Swingdiameter in the bed bridge 170
centre height 165 mm
centre distance 830 mm
Turning length in the bed bridge 430
reus 16 (70-2000) U / min
tail stock MK 3
quill stroke 110 mm
diameter of quill 32 mm
spindle taper DIN ISO 702-2 Nr. 4
spindle bore 38 mm
spindle cone MK 5
feed längs 32 / 0,052 1,392 m / min
feed plan 3,2 / 0,014 0,38 m / min
total power requirement kW
weight of the machine ca. 0,52 t
Fully equipped leading and tension spindle lathes. TH 3309D with
digital position indicator DPA 21 / 3402040
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 4
- Precisely crafted slide
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- Quadruple steel holder
- All guides can be adjusted using V-ledges
- Main spindle running in an oil bath
- Gear wheels run smoothly, hardened and ground
- Upper slide adjustment range ± 90
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Handwheels decoupled and tested according to EN 23125
- Safety handwheels with push-out function in the X and Z axes
- Two-channel right-left switch tested according to EN 23125
- DC 24 volt electrical system with two-channel safety circuit according to EN
23125
- Lathe chuck protection tested according to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Lockable main switch
- Clockwise / counterclockwise rotation on the bed slide switchable
- Lead screw cover
- Tailstock for taper turning adjustable ± 10 mm
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Quick, easy and tool-free adjustment using a clamping lever
- Heavily ribbed prism bed, inductively hardened and precision ground
- Machine base with tool compartment on the right-hand side (left-hand side
with 3
Bezels (no compartments)
- Pull-out chip tray with guide rails
- Emergency stop device with foot actuation
- LED machine lamp integrated in the chip guard
Digital position indicator DPA 21
- User-friendly membrane keyboard, splash-proof, closed
and glare-free
- glass rulers
scope of delivery
- Fixed steady rest passage Ø 6 - Ø 50 mm
- Moving steady rest passage Ø 8 - Ø 30 mm
- LED machine light
- Reduction sleeve MK 5 / MK 3
- Two fixed centering points MK 3
- Quadruple steel holder 16 mm
- Change gears set
- machine base
- Initial machine filling with quality oil
- operating tool
** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping
Ø 200 mm Camlock DIN ISO 702-2 No. 4 / 3442762
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stato

Nuovo e inutilizzato

Anno di costruzione

NEU

Macchina sull'elettricità

no
Invia richiesta

Offerta da:

Heinz SANDERS GmbH

Heinz SANDERS GmbH
Friederikenstraße 100
26871 Papenburg

contatto: Christine Fokken

Invia richiesta
Mostra il numero di telefono
Tel.: +49 4961 9890 0
Mostra il profilo aziendale



Altre offerte interessanti in questa categoria Torni convenzionali

lathe-conventional-electronic OPTIMUM OPTIturn TH4215D
Torni convenzionali – lathe-conventional-electronic OPTIMUM OPTIturn TH4215D

Prezzo su richiesta
CO