Sistemi di taglio laser – Laserschneidmaschine (CO2): AMADA F0-4020NT

Posizione dell'oggetto

Fabbricante

Macchina no.

descrizione

This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!
Control Unit
Brand: AMADA

Main drive
Laserpower: 4
Laser type: CO2
Laser brand: FANUC AF4000E

Movement
X-AXIS Movement: 4420 mm
Y-AXIS Movement: 2050 mm
Z-AXIS Movement: 200 mm

Additional equipment
: 5 inch and 7.5 inch lens holders included (5 inch lens is in the machine and the 7.5 inch is stored)

Machine Benefits
Technical Machine Benefits:
- Axis travel: x 4420mm, y 2050mm, z 200mm
- Cutting feed rate: x 0 to 20m / min, y 0 to 20m / min
- Max. Rapid feed: x 80m / min, y 80m / min, z 60m / min
- Max. Worksheet weight (stand alone machine and with lst): both 1570 kg
- Table height: 940mm
- Weight with oscillator (stand alone machine): 12t
- Weight with oscillator (stand alone machine + prfo): 13,7t
- No. Of bend mirrors including collimator: 5
- Adaptive optics (optional): 1, power supply: 13 kva

Qualitative Machine Benefits:
- All maintenance has been carried out annually and the machine is technically in perfect condition.

stato

Anno di costruzione

Macchina sull'elettricità