CNC-bewerkingscentra – CNC-Sheet Metal Bending Centrum RAS MultiBend Center 79.22

Advertentie ID: M67375
Prijs op aanvraag
Verzend verzoek
Afbeeldingen
Kaart
CNC-Sheet Metal Bending Centrum RAS MultiBend Center 79.22 - om tweedehands te kopen/uploadpic/tramaofinal_inserat/bilder/67375/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/67375/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/67375/bild3.jpg

Locatie artikelen

Günzburg Germany

Fabrikant

RAS

Beschrijving

Bending length 2160 mm
sheet thickness - max. 2 mm
Bending part height (four-sided) max. 203 mm
Blank lenght max. 2260 mm
Blank width max. 1500 mm
6 x Blechdicke
Bendingspeed upper clamping 230 mm / sec
Bendingspeed bending clamping 240 ° / sec
Bending stroke 87 mm / sec
total power requirement 25 kW
weight of the machine ca. 18.000 kg
dimensions of the machine ca. 6600x5400x2450 mm
Bending length 2160 mm
sheet thickness - max. 2 mm
Bending part height (four-sided) max. 203 mm
Blank lenght max. 2260 mm
Blank width max. 1500 mm
6 x Blechdicke
Bendingspeed upper clamping 230 mm / sec
Bendingspeed bending clamping 240 ° / sec
Bending stroke 87 mm / sec
total power requirement 25 kW
weight of the machine ca. 18.000 kg
dimensions of the machine ca. 6600x5400x2450 mm
Bending length 2160 mm
sheet thickness - max. 2 mm
Bending part height (four-sided) max. 203 mm
Blank lenght max. 2260 mm
Blank width max. 1500 mm
6 x Blechdicke
Bendingspeed upper clamping 230 mm / sec
Bendingspeed bending clamping 240 ° / sec
Bending stroke 87 mm / sec
total power requirement 25 kW
weight of the machine ca. 18.000 kg
Machine was overhauled in 2013
Accessories / equipment:
- Loading: manual loading, buffer table
- First commissioning: 2002, overhauled
- Magic-Eye board scanner
- feeder
- main manipulator
- bending cell
- Lower beam tool
- tool holders
- automatic corner piece actuation
- Work surface with ball rollers
- Double belt outlet with stroke and tilting device
- CNC control "IvIULTMEND 9001"
- Electrically secured protective wall and fastening element set
Upper cheek tool set 2.0 mm
- 1 center piece (length 200 mm
- 10 grid pieces (length 150 mm)
- 14 adapter pieces: 30, 35, 40, 45, 50 and 60 mm
- The tool holder automatically clamps the tools
Bending beam tool set 12 mm wide / 30 mm deep
- Max. 2.0 mm sheet thickness
- 12 grid pieces (length 145 mm)
- 5 adapter pieces, 40, 45, 50, 55 and 60 mm
Set of swivel foot corner piece (30 mm)
- Sole for 2.0 mm right and left corner piece for the upper cheek length 90 mm
- 30 mm side clearance
Tool changer
- With two gripper arms for fully automatic assembly of the upper cheek tool length
Flap bending tool set (2 x 100 mm)
- Max. Sheet thickness 1.0 mm
- Right and left bending tool
- of welding flaps at variable positions
- (Only available together with the tool changer!)
Automatically foldable bending beam elbow tools
- length 200 mm
- for recessed bends and bends within the board
- Width of the bending strip 12 mm
Wands
- for automatically lowering and setting up the automatically foldable
Bending beam elbow tools
- (only available in conjunction with the tool changer!)
Manual loading
- Lowerable pneumatic gripper tongs hold the sheet during the measurement
Automatic stops in the feeder additional device
- for manual placement of boards in addition to the automatic one
Loading system
Double belt outlet and buffer stations
- for transporting the finished bent part and buffering on the buffer station
Air conditioning unit for control cabinet
Electricity hours: approx.65,916 h
Performance hours: approx.41,721 h
Program cycles: approx. 1,112,389 pieces
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Toestand

Tweedehands

Bouwjaar

2001

Machine onder stroom

Nee
Verzend verzoek

Aanbod van:

Bästlein Gebrauchtmaschinenhandel GmbH

Bästlein Gebrauchtmaschinenhandel GmbH
Augsburger Str. 56
89312 Günzburg

Contactpersoon: Thomas Bästlein

Verzend verzoek
Toon telefoonnummer
Tel.: +49 8221 93037-0
Bedrijfsprofiel weergeven



Andere interessante aanbiedingen in deze categorie CNC-bewerkingscentra

Bearbeitungszentren (vertikal): SPINNER VC 850
CNC-bewerkingscentra – Bearbeitungszentren (vertikal): SPINNER VC 850 (BJ.2022)

€ 82.000,-
KRAFT HBM-130 | HBM-130L | HBM-130XL №1124-94305
CNC-bewerkingscentra – KRAFT HBM-130 | HBM-130L | HBM-130XL №1124-94305

Prijs op aanvraag
CNC-Bearbeitungszentrum - vertikal: BROTHER TC 324 N
CNC-bewerkingscentra – CNC-Bearbeitungszentrum - vertikal: BROTHER TC 324 N (BJ.1999)

Prijs op aanvraag
KRAFT VL 700A | VL 1100A | VL 1100D №1124-91160
CNC-bewerkingscentra – KRAFT VL 700A | VL 1100A | VL 1100D №1124-91160

Prijs op aanvraag
Bearbeitungszentren (vertikal): Mazak FJV-35/60
CNC-bewerkingscentra – Bearbeitungszentren (vertikal): Mazak FJV-35/60 (BJ.2003)

€ 72.000,-
KRAFT CT 350 5x №1124-100276
CNC-bewerkingscentra – KRAFT CT 350 5x №1124-100276

Prijs op aanvraag
KRAFT TD-2500YBC (C-/Y-Achse und Gegenspindel) №1124-100356
CNC-bewerkingscentra – KRAFT TD-2500YBC (C-/Y-Achse und Gegenspindel) №1124-100356

Prijs op aanvraag
Bearbeitungszentren (horizontal): HELLER MC 16
CNC-bewerkingscentra – Bearbeitungszentren (horizontal): HELLER MC 16 (BJ.2002)

€ 45.000,-
Bearbeitungszentren (vertikal): CHIRON FZ18KL
CNC-bewerkingscentra – Bearbeitungszentren (vertikal): CHIRON FZ18KL (BJ.2002)

€ 13.000,-
Bearbeitungszentren (vertikal): HITACHI SEIKI VS60
CNC-bewerkingscentra – Bearbeitungszentren (vertikal): HITACHI SEIKI VS60 (BJ.2007)

€ 28.000,-
CO