Beschrijving | x-travel 900 mm
y-travel 800 mm
z-travel 710 mm
rapid traverse X,Y 15 m / min.
rapid traverse Z-axis 15 m / min
tool taper SK 50 DIN 69871A
speeds 4500 U / min
Table area 630 x 630 mm
Tool changer 60 fach
internal coolant system feed 60 bar
drive capacity - spindle motor 20 kW
total power requirement -- kW
weight of the machine ca. 17 t
dimensions of the machine ca. 3,5 x 5,3 x 3,2 m
control iTNC 530
x-travel 900 mm
y-travel 800 mm
z-travel 710 mm
rapid traverse X,Y 15 m / min.
rapid traverse Z-axis 15 m / min
tool taper SK 50 DIN 69871A
speeds 4500 U / min
Table area 630 x 630 mm
Tool changer 60 fach
internal coolant system feed 60 bar
drive capacity - spindle motor 20 kW
total power requirement -- kW
weight of the machine ca. 17 t
dimensions of the machine ca. 3,5 x 5,3 x 3,2 m
control iTNC 530
x-travel 900 mm
y-travel 800 mm
z-travel 710 mm
rapid traverse X,Y 15 m / min.
rapid traverse Z-axis 15 m / min
tool taper SK 50 DIN 69871A
speeds 4500 U / min
Table area 630 x 630 mm
Tool changer 60 fach
internal coolant system feed 60 bar
drive capacity - spindle motor 20 kW
total power requirement -- kW
weight of the machine ca. 17 t
dimensions of the machine ca. 3,5 x 5,3 x 3,2 m
control iTNC 530
x-travel 900 mm
y-travel 800 mm
z-travel 710 mm
rapid traverse X,Y 15 m / min.
rapid traverse Z-axis 15 m / min
tool taper SK 50 DIN 69871A
speeds 4500 U / min
Table area 630 x 630 mm
Tool changer 60 fach
internal coolant system feed 60 bar
drive capacity - spindle motor 20 kW
total power requirement -- kW
weight of the machine ca. 17 t
dimensions of the machine ca. 3,5 x 5,3 x 3,2 m
control iTNC 530
x-travel 900 mm
y-travel 800 mm
z-travel 710 mm
rapid traverse X,Y 15 m / min.
rapid traverse Z-axis 15 m / min
tool taper SK 50 DIN 69871A
speeds 4500 U / min
Table area 630 x 630 mm
Tool changer 60 fach
internal coolant system feed 60 bar
drive capacity - spindle motor 20 kW
total power requirement -- kW
weight of the machine ca. 17 t
dimensions of the machine ca. 3,5 x 5,3 x 3,2 m
control iTNC 530
x-travel 900 mm
y-travel 800 mm
z-travel 710 mm
rapid traverse X,Y 15 m / min.
rapid traverse Z-axis 15 m / min
tool taper SK 50 DIN 69871A
speeds 4500 U / min
Table area 630 x 630 mm
Tool changer 60 fach
internal coolant system feed 60 bar
drive capacity - spindle motor 20 kW
total power requirement -- kW
weight of the machine ca. 17 t
dimensions of the machine ca. 3,5 x 5,3 x 3,2 m
- automatic overload protection
- external operating unit (Manual Pulse Coder)
- direct threading
- Spindle oil cooling unit
- Spindle ampere meter
- Pallet magazine with 2 pallets 630 x 630 mm, integrated blower during the
change, pallet loading station
- Pallet rotary table with 1 resolution
- Coolant full protection cabin with autom. Pallet door according to CE / EMC
- Oil separator
- Built-in spiral conveyor (both sides) with chip basket
- Coolant system with pump and supply hoses
- separate lubricating oil device (central lubrication)
- Blowing device for the machine spindle
- Engine room light
- 2 warning lights (cycle end and alarm lamp)
- Transformer
- HEIDENHAIN control iTNC 530 (15 "color screen)
- HEINDENHAIN Handwheel HR410
- IKZ - Internal coolant supply through the spindle (60bar with Mahle single
filter and Brinkmann pump BS-348-60)
- Workpiece measurement system with RENISHAW MP-10 probe
- Chip conveyor with cart
- magnetic chucks HD 75 (600x 400 mm 2 pieces)
- 3 axes + 4th axis with 1 degree indexing
- flatbed guide
- Tool package
- Documentation
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. |