Categorie: Slijpmachines -> Bandslijpmachines

Bandslijpmachine – Belt Grinding Machine FALKEN FALKEN R 1

Advertentie ID: M81756

Prijs op aanvraag

Verzend verzoek

Afbeeldingen

Kaart

Belt Grinding Machine FALKEN FALKEN R 1 - om tweedehands te kopen

/uploadpic/tramaofinal_inserat/bilder/81756/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/81756/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/81756/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/81756/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/81756/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/81756/bild6.jpg

Locatie artikelen	49779 Niederlangen Germany
Fabrikant	FALKEN
Beschrijving	width of the strips 150 mm band length 2280 mm band speed 22 m / sec table-size 700 x 350 mm roll diameter 140 / 80 mm motor speeds: 2880 1 / min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW weight of the machine ca. 250 kg width of the strips 150 mm band length 2280 mm band speed 22 m / sec table-size 700 x 350 mm roll diameter 140 / 80 mm motor speeds: 2880 1 / min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW weight of the machine ca. 250 kg width of the strips 150 mm band length 2280 mm band speed 22 m / sec table-size 700 x 350 mm roll diameter 140 / 80 mm motor speeds: 2880 1 / min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW weight of the machine ca. 250 kg width of the strips 150 mm band length 2280 mm band speed 22 m / sec table-size 700 x 350 mm roll diameter 140 / 80 mm motor speeds: 2880 1 / min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW weight of the machine ca. 250 kg width of the strips 150 mm band length 2280 mm band speed 22 m / sec table-size 700 x 350 mm roll diameter 140 / 80 mm motor speeds: 2880 1 / min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW weight of the machine ca. 250 kg width of the strips 150 mm band length 2280 mm band speed 22 m / sec table-size 700 x 350 mm roll diameter 140 / 80 mm motor speeds: 2880 1 / min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Toestand	Nieuw en ongebruikt
Bouwjaar	NEU
Machine onder stroom	Nee