Draai- en freescentra – CNC Turning- and Milling Center GILDEMEISTER CTX 310 V3

Advertentie ID: M82071
Prijs op aanvraag
Verzend verzoek
Afbeeldingen
Kaart
CNC Turning- and Milling Center  GILDEMEISTER CTX 310 V3 - om tweedehands te kopen/uploadpic/tramaofinal_inserat/bilder/82071/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild6.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild7.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild8.jpg,/uploadpic/tramaofinal_inserat/bilder/82071/bild9.jpg

Locatie artikelen

D-59302 Oelde Germany

Fabrikant

GILDEMEISTER

Machine nr.

CTX 310 V3

Beschrijving

Details:
turning diameter: max. 320 mm
turning length: 450 mm
control: 32 i S Fanuc
centre height: 190 mm
turning diameter over bed: 320 mm
turning dia. over face-slide: 260 mm
turning speed range - main spindle: max. 5.000 min / -1
power capacity - main spindel: 11 / 7,5 kW
max. Torque: 115 / 86 Nm
usable bar diameter: max. ( 52 ) mm
spindle bore: 68,5 mm
spindle diameter in front bearing: 100 mm
C-Axis: 360 x 0,01 °
travel -x axis: 160 mm
travel -z axis: 450 mm
number of toolpositions: 12 pos.
tool taper: VDI 30
Shank diameter: 20 x 20 mm
Number of driven toolspositions: 6 pos.
max. speed driven tool stations: 5.000 min / -1
power capacity - driven tool-stations: 3,7 kW
tailstock adjustment: 400 mm
intake pressure max.: 4.000 N
rapid traverse: X: 20 / Z: 30 m / min
Feed force ( X / Z ): 4,5 kN
total power requirement: 24 kVA
weight of the machine ca.: 4,1 t
dimensions of the machine ca.: 5,0 x 2,2 x 1,8 m
Documents:
Chip conveyor:
Coolantsystem:
Tailstock:
C-axis:
Three Jaw Chuck: SMW Autoblok 170-56
Tool drive mechanisum:
Turret: Duplomatic
partical hollow chuck unit:

Toestand

Tweedehands

Bouwjaar

2007

Machine onder stroom

Ja
Verzend verzoek

Aanbod van:

Stiens Werkzeugmaschinenhandelsgesellschaft mbH

Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Mittelweg 92 - 94
59302 Oelde

Verzend verzoek
Toon telefoonnummer
Tel.: +49 25 22 - 83 49 0
Bedrijfsprofiel weergeven



Andere interessante aanbiedingen in deze categorie Draai- en freescentra

CNC Turning- and Milling Center  GILDEMEISTER CTX 410 V3
Draai- en freescentra – CNC Turning- and Milling Center GILDEMEISTER CTX 410 V3 (BJ.2004)

Prijs op aanvraag
DOOSAN Puma 2100 LSY [J721]
Draai- en freescentra – DOOSAN Puma 2100 LSY [J721]

Prijs op aanvraag
CNC Turning- and Milling Center  DMG MORI SEIKI NT 6600 DCG / 3000 BS
Draai- en freescentra – CNC Turning- and Milling Center DMG MORI SEIKI NT 6600 DCG / 3000 BS (BJ.2015)

Prijs op aanvraag
NAKAMURA SUPER NTX-S
Draai- en freescentra – NAKAMURA SUPER NTX-S (BJ.2007)

Prijs op aanvraag
CNC Turning- and Milling Center  GILDEMEISTER CTX 310 V3
Draai- en freescentra – CNC Turning- and Milling Center GILDEMEISTER CTX 310 V3 (BJ.2003)

Prijs op aanvraag
VICTOR Turn II 26 [5017]
Draai- en freescentra – VICTOR Turn II 26 [5017]

Prijs op aanvraag
CNC Turning- and Milling Center  MORI SEIKI NZ 1500 T3Y3
Draai- en freescentra – CNC Turning- and Milling Center MORI SEIKI NZ 1500 T3Y3 (BJ.2008)

Prijs op aanvraag
CNC Multitasking Machine NAKAMURA NTRX-300
Draai- en freescentra – CNC Multitasking Machine NAKAMURA NTRX-300 (BJ.2015)

Prijs op aanvraag
KRAFT TD-1500Y  (C-/Y-Achse) №1124-100334
Draai- en freescentra – KRAFT TD-1500Y (C-/Y-Achse) №1124-100334

Prijs op aanvraag
CNC Multitasking Machine OKUMA MULTUS U4000 1SW 1500
Draai- en freescentra – CNC Multitasking Machine OKUMA MULTUS U4000 1SW 1500 (BJ.2016)

Prijs op aanvraag
CO