Levellers / levelers – Roller leveller UNGERER 1800/2,25/23

Locatie artikelen

Fabrikant

Beschrijving

material width 1650 mm
material thickness 2,00 mm
no. of straightening rolls 23
sheet thickness - min. 0,50 mm
diam. of the rolls ca. 53,60 mm
straight. rolls-needle bearings ja / yes
between stands ca. 1750 mm
barrel length ca. 1820 mm
straight. speed ca. m / min
total power requirement 58 kW
weight of the machine ca. 19,60 t
dimensions of the machine ca. 6,00 x 3,00 x 2,90 m
Number - supports 14 (7 x above / 7 x below) with support rollers
Number - support rollers 174 ( 84 x above / 91 x below)
Support roller dia. approx. 112mm
Drive power - main drive 55 kW
Motorized height adjustment
Electromotive tipping device
Crowning (support adjustment (below) mechanical / manual) and individually
deliverable
1 set of straightening rollers (replacement rollers) diam. 53.68mm
Central grease lubrication of the straightening rollers bearing rails
Circulating oil lubrication of gears and cardan shafts
Control is missing
All motors: main drive motor, pan motor, height adjustment motor
and oil pump are provisionally provided with a connection cable.
A 24 V transformer is used for the swivel motor and for the height adjustment
motor
still needed - this is for the brake.
1 box of spare rollers
1 new drive motor 55 kW
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Toestand

Bouwjaar

Machine onder stroom