Beschrijving | 23 mm
threading in St 60 M14
threading in GG 20 M16
MK 2
125-2400 U / min.
spindle stroke 100 mm
throat 250 mm
column diameter 90 mm
370x300 mm
2x14x160 mm
distance spindle / table min. / max. 140 / 670 mm
Handkurbel
feed von Hand
height of the machine 1770 mm
weight of the machine ca. 180 kg
Standard equipment:
7" TFT LCD display with touch function: Manual input of spindle speed setpoint,
speed display actual value, integrated drilling depth display with touch
function.
setpoint, actual speed display, integrated drilling depth display with touch
zero point transfer, virtual drilling depth scale in the display, machine status
status indicators and warnings on the display, Service information, Selectable
operator language
operator language: DE / EN / FR / ES / IT / NL / RU
- Thread cutting device, for thread cutting with stop, max. 12
threads / min (thread cutting capacity depends on spindle speed), thread depth
adjustable via depth stop and on the TFT LCD display (4 tools).
Attention: Spindle stroke is reduced by 15 mm.
- Infinitely variable speed adjustment by means of adjustment lever
- Spindle protection with electrical fuse
- Three separate buttons for clockwise rotation - anticlockwise rotation - stop
- Mushroom pushbutton (latching) for EMERGENCY STOP
- Main switch, lockable
- Clockwise and counter-clockwise rotation via contactor control
- Control voltage 24 Volt
- Protection class IP 54
- Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. |
/uploadpic/tramaofinal_inserat/bilder/67311/bild1.jpg
