Suction devices – Schuko Vacomat 180

Vis ID: M77169
Pris ved forespørsel
Send forespørsel
Bilder
Kart
Schuko Vacomat 180 - å kjøpe brukt/uploadpic/tramaofinal_inserat/bilder/77169/4.jpg

Gjenstandens beliggenhet

42897 Remscheid Germany

Produsent

Schuko

Beskrivelse

Vacomat 180 XP and 180 XPe
The Vacomat 180 XP (e) mobile deduster is ideal for single or multi-machine suction with an air output of up to 2,610 m³ / h. In a safe vacuum process, dusts and chips are pneumatically extracted and conveyed, e.g. for the dust removal of long-band grinding machines, large table milling machines or small wide-band grinding machines.
The suction is manually started in the standard version at the push of a button. On request, an automatic start of the ventilator is available when the connected processing machines are switched on, so that the suction function is not forgotten. is operated unnecessarily during idling.
The dust, chip mixture is discharged into two dust-tight collecting tanks (2 x 240 l) with a plastic bag inserted. A vacuum channel securely holds the foil bag in the collecting container. Viewing windows make it easier to check the filling level. Optionally, a level monitor can be installed to prevent overrun.
The mobile dust extractor independently monitors its suction power via a pressure measurement box and ensures maximum operational safety.
Instead of being discharged into two spider ammeltons, it is possible to accommodate a chip container, which allows the dusty disposal via a Schuko briquetting press.
The filter regeneration-XP or XPe?
In the case of Vacomat 180 XP, the filter cleaning is carried out pneumatically / mechanically. Due to the connection to compressed air, dust and chips are filtered out with a patented "shredding" filter-friendly. As soon as the dust removal device is switched off, the regeneration mechanism is manually started by hand.
With the Vacomat 180 XPe, an integrated switch cabinet provides electrical / mechanical control over a vibratory motor for cleaning. The control is effected by means of the query of the woodworking machine by means of potential-free contacts. As soon as all the connected machines have been switched off, the motor filter shaking starts automatically. No connection to compressed air is required for the regeneration mechanism and therefore no compressor is required. This leads to a significant reduction of the noise level during the cleaning process.
An efficient pressure shock cleaning (XP-D or XPe-D) is available (ATTENTION: height +100 mm and length +350 mm), especially in the case of very high and particularly fine dust components. The cleaning of the compressed air tank takes place offline, after the suction operation

Prices from stock Remscheid. Depending on the manufacturer, additional transport costs can be incurred up to our warehouse. Intermediate sale reserved for single pieces. Errors and changes in the technical characteristics are reserved. Images can include optional special equipment.

Delens tilstand

Helt ny

Byggeår

2022

Maskin timer

0

Maskin under kraft

Nei
Send forespørsel

Tilbud fra:

Maschinen Kaiser GmbH

Maschinen Kaiser GmbH
Tenter Weg 214
42897 Remscheid

Kontaktperson: Sven Kaiser

Send forespørsel
Vis telefonnummer
Tel.: 02191 - 95129 0
Vis firmaprofil



Andre interessante tilbud i denne kategorien Suction devices

Schuko Vacomat 350XP twin
Suction devices – Schuko Vacomat 350XP twin (BJ.2022)

Pris ved forespørsel
Schuko Vacomat 140/160 XPE
Suction devices – Schuko Vacomat 140/160 XPE (BJ.2022)

Pris ved forespørsel
CO