Maszyny używane: Centra obróbcze CNC

Wynik wyszukiwania – 383 Centra obróbcze CNC znaleziony

Kategoria: Centra obróbcze -> Centrum obróbkowe poziome / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (horizontal): HERMLE C 600 V
Rok budowy: 1998
Warunek: Używane
Bearbeitungszentren (horizontal): HERMLE C 600 V
Wyświetl identyfikator: M104461
Germany
This HERMLE C 600 V Horizontal Machining center was manufactured in the year 1998 in Germany and has 29289 spindle hours. It is equipped with a HEIDENHAIN TNC 430 M control unit. It is included a ...
€ 21.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): POSmill E 1100
Rok budowy: 2013
Warunek: Używane
Bearbeitungszentren (vertikal): POSmill E 1100
Wyświetl identyfikator: M104464
Germany
This POSmill E1100 Vertical machining center was manufactured in the year 2013 in Germany and has 7181 spindle hours. It is equipped with a HEIDENHAIN iTNC530 control unit. It comes with a 3-D ...
€ 65.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Hurco VMX 50/40T
Rok budowy: 2005
Warunek: Używane
Bearbeitungszentren (vertikal): Hurco VMX 50/40T
Wyświetl identyfikator: M104469
Germany
This HURCO VMX 50/40T Vertical Machining Centre was manufactured in 2005 in Taiwan. It comes with a 10,000 rpm spindle (SK40 tool taper), 3 axes (X = 1270 mm / Y = 660 mm / Z = 610 mm) and automatic ...
€ 25.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Feeler QM-32
Rok budowy: 2003
Warunek: Używane
Bearbeitungszentren (vertikal): Feeler QM-32
Wyświetl identyfikator: M104472
Slovenia
This FEELER QM-32 Vertical Machining Centre was manufactured in the year 2003 in Taiwan. It is equipped with a FANUC 18-m control unit. It is included with a Renishaw Tool Measurement System, ...
€ 22.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centra obróbcze CNC
DECKEL-MAHO (DMG) DMC 105 V linear  -  CNC Vertical Double Column Machining Center
Rok budowy: 2008
Warunek: Bardzo dobrze
DECKEL-MAHO (DMG) DMC 105 V linear - CNC Vertical Double Column Machining Center
Wyświetl identyfikator: M104664
63165 Mühlheim am Main Germany
Machine type: CNC-Vertical-Double Column-Machining Center
Manufacturer: DECKEL-MAHO (DMG)
Type/Model: DMC 105 V linear
Year of construction: 2008
Machine condition: very ...
Cena na zapytanie
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): HARTFORD MVP-11
Rok budowy: 2018
Warunek: Używane
Bearbeitungszentren (vertikal): HARTFORD MVP-11
Wyświetl identyfikator: M104345
Spain
This HARTFORD MVP-11 3-axis Vertical Machining Centre was manufactured in 2018 in Taiwan. It is equipped with a 12000 rpm spindle with BT40 tool taper. The automatic tool changer has 24 slots and can ...
€ 55.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): EXTRON Digma HSC 300/P
Rok budowy: 2006
Warunek: Używane
Bearbeitungszentren (vertikal): EXTRON Digma HSC 300/P
Wyświetl identyfikator: M104346
Czech Republic
This EXERON Digma HSC 300/P 3-axis Vertical Machining Centre was manufactured in 2006 in Germany. It is equipped with a Heidenhain iTNC530 control unit and a 42000 rpm spindle. In addition to its 3 ...
€ 29.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (universal): DMG DMU 105 MonoBlock
Rok budowy: 2013
Warunek: Używane
Bearbeitungszentren (universal): DMG DMU 105 MonoBlock
Wyświetl identyfikator: M104350
Germany
This DMG DMU 105 MonoBlock Universal Machining center machine was manufactured in the year 2013 in Germany and has 24687 spindle hours. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit. It ...
€ 320.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): POSmill E 2050 L HSCI
Rok budowy: 2015
Warunek: Używane
Bearbeitungszentren (vertikal): POSmill E 2050 L HSCI
Wyświetl identyfikator: M104353
Germany
This POSMILL E 2050 L HSCI Vertical Machining center machine was manufactured in the year 2015 in Germany and has 2750 spindle hours (since spindle renewal in April 2021). It is equipped with a ...
€ 165.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DMG MORI DMC 1150 V
Rok budowy: 2017
Warunek: Używane
Bearbeitungszentren (vertikal): DMG MORI DMC 1150 V
Wyświetl identyfikator: M104293
Germany
This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control ...
€ 150.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Tongtai VP-8
Rok budowy: 2016
Warunek: Używane
Bearbeitungszentren (vertikal): Tongtai VP-8
Wyświetl identyfikator: M104296
Slovenia
This TONGTAI VP-8 Vertical Machining Centre was manufactured in 2016 in Taiwan. It has a table size of 900 x 510 mm with a max. table load of 500 kg and is equipped with a FANUC control. This 3-axis ...
€ 77.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DECKEL MAHO DMU 60 MonoBlock
Rok budowy: 2005
Warunek: Używane
Bearbeitungszentren (vertikal): DECKEL MAHO DMU 60 MonoBlock
Wyświetl identyfikator: M104303
South Korea
This DECKEL MAHO DMU 60 MonoBlock 5-Axis Vertical Machining Centre was manufactured in 2005. It has a 18,000 rpm spindle with SK40 tool taper. The machine is operated with a MillPlus control.
€ 60.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (universal): DMG MORI DMF 300-8
Rok budowy: 2023
Warunek: Używane
Bearbeitungszentren (universal): DMG MORI DMF 300-8
Wyświetl identyfikator: M104308
Germany
This DMG MORI DMF 300-8 Universal machining center was manufactured in 2023. It is equipped with a SIEMENS 840D SL control unit and has 5 axis. The machine is completely new and has the full OEM ...
€ 595.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DOOSAN DNM 500
Rok budowy: 2012
Warunek: Używane
Bearbeitungszentren (vertikal): DOOSAN DNM 500
Wyświetl identyfikator: M104065
Germany
This DOOSAN DNM 500 (2012) 4-axis Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a 8,000 rpm spindle, BT40 tool taper, a 4th axis (lehmann rotary table - ...
€ 55.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (universal): Mazak INTEGREX i-800V/8
Rok budowy: 2017
Warunek: Używane
Bearbeitungszentren (universal): Mazak INTEGREX i-800V/8
Wyświetl identyfikator: M102776
Sweden
This MAZAK INTEGREX i-800V/8 (2017) 5-Axis Universal Machining Centre (Turn-Mill) was manufactured in 2017 in Japan. It is equipped with a high torque milling spindle with scale feedback (max. 5.000 ...
€ 499.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Hurco VMX 24
Rok budowy: 2003
Warunek: Używane
Bearbeitungszentren (vertikal): Hurco VMX 24
Wyświetl identyfikator: M102777
Hungary
This HURCO VMX24 3-axis Vertical Machining Centre was manufactured in 2003 and is equipped with a 10000 rpm spindle, SK40. It comes with a 24x tool magazine and external water cooling. The control ...
€ 20.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Hurco VMX 10
Rok budowy: 2011
Warunek: Używane
Bearbeitungszentren (vertikal): Hurco VMX 10
Wyświetl identyfikator: M102778
Hungary
This HURCO VMX 10 (2011) 3-axis Vertical Machining Centre was manufactured in 2011 and is equipped with a HURCO Win Max control unit. It features a 10000 rpm spindle, SK40. The machine comes with a ...
€ 18.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Hurco VMX24S
Rok budowy: 2003
Warunek: Używane
Bearbeitungszentren (vertikal): Hurco VMX24S
Wyświetl identyfikator: M102779
Hungary
This HURCO VMX24S 3-axis Vertical Machining Centre was manufactured in 2003 and is equipped with a 15000 rpm spindle, SK40. It comes with a 24x tool magazine and external water cooling. The control ...
€ 15.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): STAMA MC 326 TWIN
Rok budowy: 2000
Warunek: Używane
Bearbeitungszentren (vertikal): STAMA MC 326 TWIN
Wyświetl identyfikator: M102780
Germany
This STAMA MC 326 TWIN Vertical Machining Centre was manufactured in 2000 in Germany. It has a Siemens control 840 D. It is equipped with a spindle with HSK63-A.
Control Unit
Brand: ...
€ 19.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): CHIRON DZ15W MAGNUM HS
Rok budowy: 2015
Warunek: Używane
Bearbeitungszentren (vertikal): CHIRON DZ15W MAGNUM HS
Wyświetl identyfikator: M102732
United Kingdom (UK)
This CHIRON DZ15W MAGNUM HS Vertical Machining Centre was manufactured in 2015. It is equipped with a FANUC Series 31i-model B5 control unit, has 4 axes and a 12000 rpm spindle. The machine comes with ...
€ 155.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Mazak FJV-25
Rok budowy: 1998
Warunek: Używane
Bearbeitungszentren (vertikal): Mazak FJV-25
Wyświetl identyfikator: M102733
Czech Republic
This MAZAK FJV-25 (1998) Vertical Machining center was manufactured in the year 1998 in Japan. It is equipped with a Mazatrol M-Plus control unit. This machine has a spindle with 12000 rpm. Disposes ...
€ 12.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): FAMU PHS 680
Rok budowy: 2008
Warunek: Używane
Bearbeitungszentren (vertikal): FAMU PHS 680
Wyświetl identyfikator: M102734
Italy
This FAMU PHS 680 Machining centers (vertical) machine was manufactured in 2008 in Italy. The machine has a spindle speed of 30000 rpm. It is equipped with a CNC Heidenhain control unit and has 3 ...
€ 52.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): HAAS VF-7/40
Rok budowy: 2014
Warunek: Używane
Bearbeitungszentren (vertikal): HAAS VF-7/40
Wyświetl identyfikator: M102736
Spain
This HAAS VF-7/40 Vertical Machining center was manufactured in 2014 in the United States. It is equipped with a HAAS control unit. The machine dispose of a 3 axis: X (2134 mm), Y (813 mm) and Z (762 ...
€ 89.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbkowe poziome / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (horizontal): MORI SEIKI NH8000DCG
Rok budowy: 2008
Warunek: Używane
Bearbeitungszentren (horizontal): MORI SEIKI NH8000DCG
Wyświetl identyfikator: M102740
Spain
This Mori SeikiNH8000DCG Machining centers (horizontal) was manufactured in 2008 in Japan. It operates with a CNC Control unit, a spindle speed of 8000 rpm and 4 axis.
General Data
€ 165.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DMG MORI CMX 600 V
Rok budowy: 2022
Warunek: Używane
Bearbeitungszentren (vertikal): DMG MORI CMX 600 V
Wyświetl identyfikator: M102741
Austria
This DMG MORI CMX 600 V Vertical Machining Centre was manufactured in 2022. It has 4 axes with a NC rotary table (4th axis) from Lehmann with indirect measuring system. The table size is 900 x 560 mm. ...
€ 99.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Kent KMV 13 YL
Rok budowy: 2004
Warunek: Używane
Bearbeitungszentren (vertikal): Kent KMV 13 YL
Wyświetl identyfikator: M102743
Italy
This KENT KMV 13 YL Vertical Machining Centre was manufactured in the year 2007. The machine has a spindle speed of 10000 rpm and 3 axis.
General Data
Measurements width: 4500 mm
€ 32.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DN SOLUTIONS VCF 850LSRII
Rok budowy: 2022
Warunek: Używane
Bearbeitungszentren (vertikal): DN SOLUTIONS VCF 850LSRII
Wyświetl identyfikator: M102744
Germany
This DOOSAN VCF 850LSRII Vertical Machining center was manufactured in the year 2022 in South Korea. It is equipped with a 3,000 mm X-axis travel and controlly by a FANUC 31iB5 Plus control unit. The ...
€ 270.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DN SOLUTIONS MYNX 6500/50
Rok budowy: 2023
Warunek: Używane
Bearbeitungszentren (vertikal): DN SOLUTIONS MYNX 6500/50
Wyświetl identyfikator: M102746
Germany
This DN Solutions MYNX 6500/50 Vertical Machining center was manufactured in the year 2023 in South Korea. It is equipped with a DN Solutions Fanuc i-Series control unit. The machine has a spindle ...
€ 145.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DOOSAN MYNX 5400/50
Rok budowy: 2022
Warunek: Używane
Bearbeitungszentren (vertikal): DOOSAN MYNX 5400/50
Wyświetl identyfikator: M102748
Germany
This DOOSAN MYNX 5400/50 Vertical Machining center was manufactured in the year 2022 in South Korea and has 1452 production hours, of which 211 are cutting hours. It is equipped with a DN Solutions ...
€ 119.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DMG MORI M1
Rok budowy: 2022
Warunek: Używane
Bearbeitungszentren (vertikal): DMG MORI M1
Wyświetl identyfikator: M102667
Czech Republic
This DMG MORI M1 Vertical Machining Centre was manufactured in 2022 in Poland. This machine has 3 axes (x = 550 / y = 550 / z = 510) and is configurated as the "plus" version with 10,000 rpm and chip ...
€ 59.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DOOSAN DNM 650
Rok budowy: 2012
Warunek: Używane
Bearbeitungszentren (vertikal): DOOSAN DNM 650
Wyświetl identyfikator: M102669
Italy
This DOOSAN DNM 650 Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a HEIDENHAIN iTNC 530 control and internal cooling - IKZ - 18 bar. This 5-axis machining ...
€ 75.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): DOOSAN DNM 500
Rok budowy: 2012
Warunek: Używane
Bearbeitungszentren (vertikal): DOOSAN DNM 500
Wyświetl identyfikator: M102546
Italy
This DOOSAN DNM 500 Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a HEIDENHAIN iTNC 530 control and internal cooling - IKZ - 18 bar. This 4 axis machining ...
€ 55.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (universal): POSmill H800U
Rok budowy: 2018
Warunek: Używane
Bearbeitungszentren (universal): POSmill H800U
Wyświetl identyfikator: M102547
Germany
This POS H800U Universal Machining Centre was manufactured in 2018 in Germany. It has 5 axis (X = 670, Y = 600 mm, Z = 820 mm / Swivel range -100 to +120 degrees, Rotary table 360 degrees endless) ...
€ 200.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Makino V55
Rok budowy: 2001
Warunek: Używane
Bearbeitungszentren (vertikal): Makino V55
Wyświetl identyfikator: M102553
Italy
This Makino V55 Vertical Machining center was manufactured in the year 2001. It is equipped with a Fanuc Professional 3 control unit. The machine has a spindle speed of 20000 rpm.
Control ...
€ 56.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Mazak VCN-530C
Rok budowy: 2020
Warunek: Używane
Bearbeitungszentren (vertikal): Mazak VCN-530C
Wyświetl identyfikator: M102427
Czech Republic
This MAZAK VCN-530C Vertical Machining center was manufactured in the year 2020 in Japan and has 1440 spindle hours. It is equipped with a MAZATROL SmoothG control unit. The spindle has cooling ...
€ 110.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): HARTFORD PRO 1000
Rok budowy: 2011
Warunek: Używane
Bearbeitungszentren (vertikal): HARTFORD PRO 1000
Wyświetl identyfikator: M102428
France
This HARTFORD PRO 1000 (2011) Machining centers (vertical) machine was manufactured in 2011 . It is equipped with a CNC Fanuc control unit and has 5 axis. It is in very good working condition and can ...
€ 51.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): HAAS VF-5/40TR
Rok budowy: 2018
Warunek: Używane
Bearbeitungszentren (vertikal): HAAS VF-5/40TR
Wyświetl identyfikator: M102399
Bulgaria
This HAAS VF-5/40TR Vertical Machining center was manufactured in the year 2018 in the United States. It is equipped with a HAAS control unit and has 5 axis (removable 210 mm 2-axis thumb rotary ...
€ 120.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Machining Center - Univ. REIDEN RX 12
Rok budowy: 2019
Warunek: Używane
Machining Center - Univ. REIDEN RX 12
Wyświetl identyfikator: M102363
Germany
Machine in top condition (3250 h)

Furnishing:
- Direct position measurement system on all axes
- 5 axis simulation
- Hinged belt conveyor
- Blum TC 60 measuring ...
Cena na zapytanie
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): HAAS VF-3YT/50
Rok budowy: 2017
Warunek: Używane
Bearbeitungszentren (vertikal): HAAS VF-3YT/50
Wyświetl identyfikator: M102364
Poland
This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine ...
€ 79.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): HAAS VF-3SSYT
Rok budowy: 2019
Warunek: Używane
Bearbeitungszentren (vertikal): HAAS VF-3SSYT
Wyświetl identyfikator: M102368
Italy
This HAAS VF-3SSYT Vertical Machining centre was manufactured in the year 2019 in the United States. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 ...
€ 57.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (universal): Okuma GENOS M460V-5AX
Rok budowy: 2019
Warunek: Używane
Bearbeitungszentren (universal): Okuma GENOS M460V-5AX
Wyświetl identyfikator: M102341
Denmark
This OKUMA GENOS M460V-5AX Universal Machining center was manufactured in the year 2019. It has 5 axis and a tool magazin with 48 slots. The machine has a spindle speed of 15000 rpm.
Main ...
€ 215.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centra obróbcze CNC
cnc-processing center MASTERWOOD PROJECT TF 100 2.0
Rok budowy: 2024
Warunek: Nowe i nieużywane
cnc-processing center MASTERWOOD PROJECT TF 100 2.0
Wyświetl identyfikator: M102356
D-72531 Hohenstein-Bernloch Germany
working width 1000 mm
workpiece length - max. Unbegrenzt mm
work height max. 60 mm
working width 1000 mm
workpiece length - max. Unbegrenzt mm
work height max. 60 mm
Cena na zapytanie
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): SPINNER VC 450
Rok budowy: 2014
Warunek: Używane
Bearbeitungszentren (vertikal): SPINNER VC 450
Wyświetl identyfikator: M102192
Slovenia
This SPINNER VC 450 Vertical Machining center was manufactured in the year 2014 in Germany. The machine has a spindle speed of 15000 rpm and a spindle motor power of 16 kW.
Main drive
€ 39.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (universal): MORBIDELLI Universal 3012 TV
Rok budowy: 2008
Warunek: Używane
Bearbeitungszentren (universal): MORBIDELLI Universal 3012 TV
Wyświetl identyfikator: M102154
Poland
This MORBIDELLI Universal 3012 TV Universal Machining center was manufactured in the year 2008. It is equipped with a CNC XILOG Plus control unit and has 3 axis.
Control Unit
Brand: CNC ...
€ 15.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): HERMLE C20U
Rok budowy: 2008
Warunek: Używane
Bearbeitungszentren (vertikal): HERMLE C20U
Wyświetl identyfikator: M102158
Italy
This HERMLE C20U Vertical Machine Center was built in the year 2008. It is equipped with a HEIDENHAIN TNC 530 CNC control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.
€ 70.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): Brother TC-S2B-O
Rok budowy: 2005
Warunek: Używane
Bearbeitungszentren (vertikal): Brother TC-S2B-O
Wyświetl identyfikator: M102090
Poland
This Brother TC-S2B-O Vertical Machining center was manufactured in the year 2005 in Japan. It is equipped with a Brother A00 and has 4 axis. The machine has a spindle speed of 10000 rpm.
€ 32.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): STYLE MC 750
Rok budowy: 2020
Warunek: Używane
Bearbeitungszentren (vertikal): STYLE MC 750
Wyświetl identyfikator: M102095
Andorra
This STYLE MC 750 Vertical Machining center was manufactured in the year 2020 in the Netherlands and has 1156 production hours. It has 4 axis. The machine has a spindle speed of 8000 rpm. See the ...
€ 53.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze w pionie / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (vertikal): STYLE MC 1500
Rok budowy: 2020
Warunek: Używane
Bearbeitungszentren (vertikal): STYLE MC 1500
Wyświetl identyfikator: M102097
Andorra
This STYLE MC 1500 Vertical Machining center was manufactured in the year 2020 in the Netherlands and has 2255 production hours. It has 3 axis. The machine has a spindle speed of 10000 rpm. Original ...
€ 74.000,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbkowe poziome / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (horizontal): Mazak H-500
Rok budowy: 1990
Warunek: Używane
Bearbeitungszentren (horizontal): Mazak H-500
Wyświetl identyfikator: M102098
Finland
This MAZAK H-500 Horizontal Machining center was manufactured in the year 1990 in Japan. It is equipped with a Mazatrol M32 control unit and has 4 axis. The machine has a spindle speed of 50-7000 rpm ...
€ 6.500,-
Wysłać prośbę
Kategoria: Centra obróbcze -> Centrum obróbcze uniwersalne / Centra obróbcze -> Centra obróbcze CNC
Bearbeitungszentren (universal): DECKEL MAHO DMU 100T
Rok budowy: 2004
Warunek: Używane
Bearbeitungszentren (universal): DECKEL MAHO DMU 100T
Wyświetl identyfikator: M102102
Liechtenstein
This DECKEL MAHO DMU 100T (2004) 5-Axis Universal Machining Centre was manufactured in the year 2004. It is equipped with a MILL PLUS iT control. The machine has a new spindle, with only approximately ...
€ 39.000,-
Wysłać prośbę
tramao-Logo

Sprzedaj używane Centra obróbcze CNC

Detale!
Sprzedaj swoje maszyny do obróbki metalu, obrabiarki, maszyny drukarskie, maszyny budowlane, maszyny do obróbki drewna na tramao.com.

Znajdujesz się w kategorii "Centra obróbcze CNC". Ta kategoria należy do głównej kategorii Centra obróbcze. La Główna kategoria Centra obróbcze obejmuje również inne nowe i używane maszyny, które mogą Cię zainteresować. Sprawdź naszą bogatą ofertę!

Asortyment obejmuje maszyny takie 5-osiowe centrum obróbcze, Centra obróbcze CNC, Centra tokarsko-frezarskie, Centra wiercenia i frezowania, Centrum obróbcze uniwersalne, Centrum obróbcze w pionie, Centrum obróbkowe poziome, Endenbearbeitungsmaschinen, Gięcie i wykrawanie centrów obróbczych, Portalowe centrum obróbcze, Rotary tranfer machines, revolving machines etc.!

Istnieje również możliwość wyszukiwania części zamiennych, narzędzi i powiązanych firm usługowych.

CO