Máquinas usadas: Prensas

Catalog No. : 6992
Type: LKT 250
Producer: METALPRESS
Made in: 1963
Characteristic:
Ram stroke: 120 mm
Adjusting the ram: 100 mm
Machine weight: ...

The machine is in good technical condition, not under power, dismantled, video available.

Details:
Presskraft: 100 t
Die Abmessungen des Desktop: 1035 x 690 mm

The machine is in good technical condition and can be tested.

Details:
Presskraft: 800 t
Hubanzahl: 32 /min
Stößelhub: 320 mm
Stößelverstellung: 180 mm

The machine is in good technical condition and can be tested.

Details:
Presskraft: 250 t
Die Abmessungen des Desktop: 1250x800 mm
Stößelhub: 40-160 mm

pressure 80 t
stroke 200 mm
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure 100 t
throat 300 mm
stroke 20 - 128 mm
ram - range of adjustment 80 mm
strokes per minute 60 - 90
table surface area 920 x 600 mm
ram surface 540 x 290 ...

pressure 14 t
throat max. 220 mm
stroke max. 150 mm
table surface area 450 x 430 mm
power stroke 22 mm
air pressure 10 bar
weight of the machine ca. kg

pressure 30 t
throat max. 250 mm
stroke max. 200 mm
dayligth 475 mm
table surface area 550 x 500 mm
weight of the machine ca. 2050 kg
power stroke 20 mm
The ...

pressure 14 t
throat max. 220 mm
stroke max. 150 mm
table surface area 450 x 430 mm
power stroke 22 mm
air pressure 10 bar
weight of the machine ca. kg

pressure 30 t
throat max. 250 mm
stroke max. 200 mm
power stroke 20 mm
dayligth 475 mm
table surface area 550 x 500 mm
weight of the machine ca. 2050 kg
The ...

Press is fully funcional and can be inspected under running conditions.Press Design
drive system:  eccentric / crank
openings in uprights:  yes
number of ...

pressure 100 t
throat 350 mm
stroke 20 - 120 mm
table size 1100 x 700 mm
ram head dimension 750 x 450 mm
ram adjustment max. 90 mm
no. of strokes 70 Hub/min

pressure 100 t
throat 300 mm
stroke 400 mm
oil volume 300 l
diameter of piston 200 mm
piston speed, rapid traverse 121 mm/s
piston speed, low pressure 60 mm/s

pressure 160 t
distance between columns mm
stroke 200 mm
table surface area 2040 x 840 mm
throat 450 mm
no. of strokes 30 - 55 Hub/min
dayligth 450 mm
ram ...

pressure 30 t
throat 300 mm
stroke 245 mm
dayligth 360 mm
table surface area 640 x 540 mm
table height over floor 800 mm
oil volume 300 l
closing speed 70 ...

Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation.

Ref.Nr.: INNO25832

Pneumatic operation
Various knives and operating instructions available
Compressed air connection 6-8 bar
Weight approx. 250 kg

Details:
Condition: Used
Location: Ennepetal - Hall 1
Delivery Terms: available immediately
Quotation: From stock - free on truck

This ram was dismantled from the ...

Coil line KOHLERZig-zag feed2-axis transfer unitPress force monitoring BRANKAMPcushion mounting bar in table with exchangeable pneumatic cushion unitsMAYFRAN scrap conveyor (cross conveyor)optional ...

+ Coil feed line KOHLER with straightener KRE2 18.260/19+ Feeder KAISER KWV 250+ 2-axis gripper bars transfer SANDER with adjustable pitch+ table cushion rail with various cushions and fillers ...

Ref.Nr. 2000 HD60
Bezeichnung der Anlage / Description : Neue hydraulische Werkstattpresse new hydraulic workshop press

Hersteller / Made : Hidroliksan
Model / Type : ...

Ref.2001 HD80
Bezeichnung der Anlage / Description : Neue hydraulische Werkstattpresse new hydraulich workshop press

Hersteller / Made : Hidroliksan
Model / Type : HD80 ...

Ref.Nr. 2002HD100
Bezeichnung der Anlage / Description : Neue hydraulische Werkstattpresse New hydraulic workshop press

Hersteller / Made : Hidroliksan
Model / Type : ...

Ref.Nr. 2003 HD120
Bezeichnung der Anlage / Description : Neue hydraulische Werkstattpresse New hydraulic workshop press

Hersteller / Made : Hidroliksan
Model / Type : ...

Ref.Nr. 2004 HD160
Bezeichnung der Anlage / Description : Neue hydraulische Werkstattpresse

Hersteller / Made : Hidroliksan
Model / Type : HD160
Baujahr / Year ...

Ref.Nr. 2005 HD180
Bezeichnung der Anlage / Description : Neue hydraulische Werkstattpresse

Hersteller / Made : Hidroliksan
Model / Type : HD180
Baujahr / Year ...

Ref.nr. 2006 HD200
Bezeichnung der Anlage / Description : Neue hydraulische Werkstattpresse mit festem Zylinder

Hersteller / Made : Hidroliksan
Model / Type : HD200

Ref.-Nr. 00767
Bezeichnung der Anlage : Gebrauchte Abkantpresse

Hersteller : Hämmerle
Model : AP200-3100
Baujahr : Unbekannt voraussichtich 90 er Jahre
...

Catalog No. : 6682
Type: PDE 100 RF-HK
Producer: Müller
Made in: 2000
Characteristic:
Control system: SIEMENS SIMATIC
Pressing force: 1000 kN

Heavy 4-column deburring press with slide-tilt table. Usable table surface approx. 2500 x 1800 mm. Table height from surface area approx. 1200 mm. Pressure output 2000 kN in very good condition ...

Press height 140 mm
Pressing force 70 kN (7 t)
Hydropneumatic drive
Compressed air connection 7 bar
Air consumption per working cycle 35 l
Length 1.100 mm, depth 950 ...

A new electrical control system and a mechanical and lubrication rebuild are required.

One used PLATARG model 611 transfer press, high speed type.
Full follow cams.

Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible.

Ref.Nr.: INNO25734

Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp.

Ref.Nr.: INNO25722

Machine type: mechanical presses
Control type: conventional
Country of origin: Germany
Storage location: in stock

Technical details
Pressing force/ rated ...

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 200 t
Die Abmessungen des Desktop: 1250x1000 mm
Hauptmotorleistung: 37,5 ...

Hydropneumatic working method
Max. Punching height: 90 mm
Reversion stroke: 100 mm
Punching stroke: 20 mm
Press force: 30 kN
Max. Profile height: 100 mm

Catalog No. : 6885
Type: C5
Producer: FINN POWER
Made in: 2007
Characteristic:
Pressing force: 300 kN
Maximum length of the sheet metal: 3000 mm

Basisdaten:
Lagernummer: 27305
Kategorie: Einständer-Exzenterpressen
Fabrikat: EBU
Typ: SK 25
Baujahr: 1970
Steuerungsart: konventionell
Lagerort: ...

gebraucht
2005
7289
prompt, Zwischenverkauf v
Italien
13800 ?
1
20 to
550 mm
370 mm
110 mm
5 - 75 mm
160 ...

throat 225 mm

total power requirement kW
weight of the machine ca. 5 t
required space m
Capacity 50 Ton
Throat 225 mm
Adjustable stroke 8 - 100 mm

passage width 1500 mm

total power requirement kW
weight of the machine ca. 18 t
required space m
Capacity 300 Ton
Table size 1.500 x 1.500 mm

throat mm

total power requirement kW
weight of the machine ca. t
required space m
Capacity 3 Ton
Daylight 355 mm
Stroke of ram 280 mm
Speed of ...

This machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformity
Number of station 13 (12+1).
Capacity on any one ...

pressure 80 t
throat 305 mm
stroke 8 - 140 mm
ram adjustment 100 mm
no. of strokes 60 Hub/min
table surface area 900 x 625 mm
ram surface 600 x 280 mm

pressure 63 t
throat 315 mm
stroke 16 - 125 mm
max. distance table - ram 417 mm
ram adjustment 70 mm
no. of strokes 80 Hub/min
table surface area 800 x 630 mm

Details
pressure capacity max.:25 t

pressure 15 t
throat 160 mm
stroke 6 - 60 mm
ram adjustment 60 mm
no. of strokes 120 Hub/min
table height adjustment 150 mm
table surface area 500 x 350 mm

Machine type: Kniehebelpresse
Manufacturer: unk.
Condition: used/good
"
}, {
"translation" : "** Offer will only be sent if a complete imprint is specified! ...

pressure 50 t
distance between columns 1700 x 700 mm
stroke 400 mm
dayligth 600 mm
clamping table 1700 x 750 mm
total power requirement 11 kW
weight of the machine ...