Máquinas usadas: Máquinas retificadoras

Details:
grinding diameter: 350 mm
grinding length: 650 mm
centre height: 175 mm

X-travel: 600mm, y-travel: 475mm, z-travel: 400mm, max. table load: 600kg, connected load: 14kW, controls: UNICON-F, length: 2750mm, width: 2710mm, height: 2720mm, weight: 3.3t, with documentation, ...

grinding length 900 mm
grinding width 510 mm
workpiece height 400 mm
table surface area 800 x 400 mm
longitudinal feed of the table max. 980 mm
table speed -stepless- 1 - ...

Working diameter: 95-150mm, rotational speed: 2250-6000/min.

Ref.Nr.: INNO25408

the machine is functional, it can be seen under power, they are buying a new one

Details:
Max. Schleiflänge: 2000 mm
Max. Schleifbreite: 400 mm
Max. Werkstückhöhe: ...

Catalog No. : 6782
Type: FSG-2060 ADIII
Producer: CHEVALIER
Made in: 2014
Characteristic:
Control system: CHEVALIER
Length of the table: 600 mm

Catalog No. : 6783
Type: GU 32x60S
Producer: PALMARY
Made in: 2014
Characteristic:
Grinding diameter: 300 mm
Maximum weight of the workpiece: 100 kg

Masch. Typ: RSM-2
Masch.Nr.:2.B-236
50Hz
380V
mit Innenschleifeinrichtung

Catalog No. : 5457
Type: UB 63/2000
Producer: HOL-MONTA
Made in: 2001
Characteristic:
Control system: Kavalír
Maximum grinding length: 2000 mm

Lagernummer:
1106-SF265

Maschinenart:
Flachschleifmaschine

Fabrikat:
ABA

Typ:
FFU 1250/50

Baujahr:
1987

The machine is in good technical condition, not under power.

Details:
Max. Schleifdurchmesser: 250 mm
Max. Schleiflänge: 750 mm
Max. Werkstückgewicht: kg

Suitable for grinding of metals and other materials, with variable clamping options und manual operation.

Ref.Nr.: INNO25288

Operational voltage: 380V, nominal current: 20A.

Ref.Nr.: INNO25284

Catalog No. : 6074
Type: GR-2300-900-WWB
Producer: GRINDINGMASTER
Made in: 2002
Characteristic:
Sanding belt length: 1900 mm
Sanding belt width: 930 mm

The base of the KENT surface grinding machines KGS-52/-63/-84 are made out of heavy Meehanite cast iron body with extraordinarily high warp resistance. They are known in Germany for their high ...

The base of the KENT surface grinding machines KGS-510/-615/-620 are made out of heavy Meehanite cast iron body with extraordinarily high warp resistance. They are known in Germany for their high ...

The base of the KENT surface grinding machines KGS-715/-720 are made out of heavy Meehanite cast iron body with extraordinarily high warp resistance. They are known in Germany for their high ...

The base of the KENT surface grinding machines KGS-820/-825/-830 are made out of heavy Meehanite cast iron body with extraordinarily high warp resistance. They too, are known in Germany for their high ...

Lagernummer:
1106-SF256

Maschinenart:
Flachschleifmaschine

Fabrikat:
ZIERSCH & BALDRUSCH

Typ:
Starline 500 CNC

Scheibengröße: ø 315 mm x 40 mm, Bohrung 75 mm
Motorleistung: 1,1 kW
Gewicht, ca.: 270 kg
Abmessungen (BxTxH), ca.: 980 x 600 x 1210 mm

Ausstattung:
- 5 ...

rotary table dia. . mm
max. dia. of grinding wheel . mm
with manual ongoing . 0
manually feed . 0
rotary table dia. . mm
max. dia. of grinding wheel . mm
with ...

neu
ca. 6 Monate ab Auftragse
Taiwan
66760 ?
1341.88 ?
600 mm
600 x 300 mm
610 mm
600 x 300 mm
420 kg
700 mm
5 - 25 ...

neu
2024
5550
September 2024, Zwischenv
Taiwan
75100 ?
1509.51 ?
600 mm
1000 x 400 mm
1015 mm
1000 x 400 mm
670 kg

CNC surface grinding machine in very good condition
The machine can be demonstrated under power

Equipment:
- CNC control E.C.S. CNC 2401 System III
- Magnetic plate 1400 ...

Rotational speed: 0-15/min, without documentation.

Ref.Nr.: INNO25084

Details
grinding diameter:280/320 mm
grinding length:750 mm
centre height:170 mm
weight of the machine ca.:22,5 t
dimensions of the machine ca.:4,7 x 3,65 x 3,0 m

There are two Tschudin ESO 300 available, grinding disk dimensions: 300x125x140mm, grinding spindle rotational speed: 1050/2100/min, weight: 1.9t, with documentation.

Ref.Nr.: INNO25017

Catalog No. : 6614
Type:
Producer: JUNG
Made in:
Characteristic:
Equipment:
DRO
In good condition.

Details:
grinding diameter: 200 mm
grinding length: 400 mm
centre height: 100 mm

Catalog No. : 6436
Type: Multi Grind
Producer: Knuth
Made in: 2012
Characteristic:
Maximum grinding length: 500 mm
Grinding diameter: 200 mm
Maximum ...

Catalog No. : 6378
Type: ASP-400
Producer: BAHMÜLLER
Made in: 1986
Characteristic:
Equipment:
Copying equipment
Wheel dresser
The grinder ...

Working width: 300mm, workpiece thickness: 0.5-150mm, weight: 800kg, operational hours counter: 1164h, suitable for sanding square tubes, for decorative finish or as preparation for chrome plating, ...

width of the strips 150 mm
band length 2280 mm
band speed 22 m/sec
table-size 700 x 350 mm
roll diameter 140 / 80 mm
motor speeds: 2880 1/min
range L-W-H 1300 x 800 ...

width of the strips 75 mm
band length 2000 mm
band speed 29 / 14,5 m/s
total power requirement 3,0 kW
weight of the machine ca. 72 kg
for efficient and at the same time ...

width of the strips 150 mm
band length 2000 mm
band speed 29 / 14,5 m/s
total power requirement 3,0 kW
weight of the machine ca. 90 kg
for efficient and at the same time ...

Grinding length approx. 500 mm
Grinding diameter > 200 mm
Grinding wheel diameter approx. 700 mm
30° bevel
The basis is a Karstens grinding machine
Equipment:

Maschinendaten
Baujahr: ca. 1966
L x B x H: ca. 2200 x 1500 x 2100 mm
Gewicht: ca. 2000 kg

Technische Daten
Schleifbereich:  
Aufspannfläche des Tisches: ...

used CNC Cylindrical Grinding Machine
Manufacturer TSCHUDIN
Model PL 72
YOM 1992

With CNC – Control FANUC 0 – GC

Center height = 100 mm

There are two Nomoco M100 available, operational hours counter: 55,998h, with instruction manual, machine 1 is functional, but on machine 2 the control system has lost machine-specific programms/data ...

Basisdaten:
Lagernummer: 27288a
Kategorie: Sonstige Schleifmaschinen
Fabrikat: QUANTUM
Steuerungsart: konventionell
Lagerort: Wiesbaden
Lieferzeit: sofort

X-travel: 1300mm, y-travel: 550mm, z-travel: 560mm, table width: 600mm, max. load: 1t, table height: 950mm, controls: Siemens SINUMERIK, length: 4800mm, width: 1970mm, height: 2450mm, weight: 5.4t, ...

Horiz. Flachschleifmaschine ELB Typ SWB 10 VA II
Masch. Nr. 16500959 Baujahr ca. 1970
Schleifbereich ca. 900 x 300 mm
E-Magnet 1000 x 300 mm
Magnet-Tischfläche 900 x 300 mm

Grinding area: 630x250x300mm, clamping surface dimensions: 700x250mm.

Ref.Nr.: INNO24851

gebraucht
2007
5533
prompt, Zwischenverkauf v
Italien
5460 ?
1
178 x 78 x 78 mm
2840 1/min
250 x 150 mm
2.2 kW
830 ...

Motor power: 85W, weight: 1.6t.

Ref.Nr.: INNO24757

Doppelschleifbock Greif DV50-0-2 mit Langbandeinrichtung

· Abmessungen LxBxH ca.: 1.800 x 1.000 x 2.200 mm
· Technische Daten auf Anfrage

[TABELLE]Hersteller ...

Doppelschleifbock Langbein mit Links/Rechts Lauf für die Holzbearbeitung.

[TABELLE]Hersteller [NEUESPALTE]Langbein [NEUEZEILE]Zustand [NEUESPALTE]Gebraucht [NEUEZEILE]Referenznummer ...

Details:
Condition: Used
Location: Ennepetal - Hall 3
Delivery Terms: available immediately
Quotation: Free on truck from location

Profilschleifmaschine Loeser S0 zum schleifen von Profilen mittels Schablonen.
Das Schleifband wird über das Profil Rad/ Schablone geführt und überträgt so die Form auf das Holz welches ...

Details
total power requirement:45 kW
weight of the machine ca.:7,5 t
workpiece length - max.:150 mm
max. workpiece diameter:150 mm
max. swing diameter over bed:320 mm