Mașinile uzate: Bending machines

This Bystronic Xpert 250/4100 Press Brake Machine was built in the year 2016 in Germany and has 17550 hours. The machine has a pressing force of 2500 kN.
General Data
Machine weight: 22400 ...

This EKAL REP-40-200-3 Bending machine was manufactured in the year 1993 in Germany. It is equipped with an EKAL MT-80 control unit.
This is an EKAL pipe end press for forming pipe ends. With ...

This Schröder Fasti 145-18/075 Bending machine was manufactured in the year 2008 in Germany.
General Data
Machine weight: 1920 kg


Machine Benefits
Technical ...

This OSCAM MULTIBEND 16 Bending machine was manufactured in the year 1999 in Italy. It is equipped with a BECKHOFF control unit.
General Data
Measurements width: 2350 mm
Measurements ...

This EHT VarioPress 225-30 Bending machine was manufactured in the year 1997 in the Netherlands.

Machine Benefits
Technical Machine Benefits:
- Crowning & back gauge

This Durma AD-R 30220 Bending machine was manufactured in the year 2012 in Turkiye. The machine has a pressing force of 2200 kN and a bending length of 3050 mm.
General Data
Machine ...

This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of ...

This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a ...

This Tauring Alfa 200 Tube Bending machine was manufactured in the year 2007 in Italy.
General Data
Machine weight: 7550 kg

This RAS 62.30 TURBObend Plus bending machine was made in the year 2004. It is equipped with a Ras CNC 6000 control unit. The machine has a sheet length of 2540 mm and a max. sheet thickness of 2 ...

This ERMAKSAN AP 2100-35 Bending machine was manufactured in the year 2005 in Turkey. The machine has a pressing force of 350 kN.
General Data
Measurements height: 2288 mm

This Ermaksan AP 3100-120 Bending machine was made in 2002 in Turkey. The machine has a pressing force of 1200 kN.
General Data
Measurements width: 2170 mm
Measurements depth: 3400 ...

This Blecken PPE SE-3160 Bending machine was manufactured in the year 2007 in Spain. It is equipped with a Delem ER-70 control unit and has 4 axis. The machine has a pressing force of 1600 kN and a ...

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.
Main drive
Pressing force: 2500 kN

This STAR-BEND STAR 800 CN6/GEN/L Bending machine was manufactured in the year 2006 in Italy. It is equipped with a STAR-BEND control unit and has 6 axis.
Control Unit
Brand: STAR-BEND

This HACO ERM 36150 bending machine was made in the year 2014 and has 1962 hours. It is equipped with a CONTROLLER M8519T control unit. The machine has a pressing force of 150 kN. Robot can be ...

This ERMAK CNCHAP 3600x200 Bending machine was manufactured in the year 2005 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit. The machine has a pressing force of 2000 kN and a bending ...

The machine is in excellent condition, it can be retested.

Details:
: 3,2
: 1524
: Hydraulický
: 2495
: 5

Rohrbiegemaschine - Dornbiegemaschine TRACTO-TECHNIK Typ Transfluid DB 2060 K
Serien. Nr. 70173 Baujahr 2004
Biegeleistung (Stahl) max. Ø 76,1 x 3,0 mm
Biegeleistung (Edelstahl) ...

This OTINUS PBO 2312N Bending machines machine was manufactured in 2021. This equipment features the E21 control system with a backgauge along the X-axis and beam adjustment along the Y-axis. It ...

This Durma AD-S 40320 Bending machine was manufactured in the year 2012 in Turkey and has 35040 working hours. It is equipped with a Cybelec ModEva 10S control unit. Contact us anytime for further ...

This TRUMPF TruBend Center 7030 Bending machine was manufactured in the year 2019 and has 901 production hours. Contact us anytime for further questions
General Data
Machine weight: 31000 ...

Machine in good technical condition, plugged, can be tested.

Details:
: 9
: 1550
: 4
: Hydraulický
: 180
: 150
: 4+1,5
: 3350 x ...

The machine can be tested in good technical condition. Hydraulic clamping, bending. Automatic shear.

Details:
: 1
: 6000
: Hydraulický

50 mm
8,5 U/min
100 kN
roll diameter 162 mm
Drive 1,5 kW
range L-W-H 1100x800x1500 mm
weight 450 kg
Equipment / Accessories:
- Two driven rollers

60x3 mm
60x2,5 mm
35 mm
64x4 mm
R10-R300
bending speed 2 U/min
total power requirement 1,5 kW
weight of the machine ca. 130 kg
dimensions of the ...

roll diameter 50 mm
roll diam. toproll 155 mm
roll diam. bottom roll 155 mm
total power requirement 1,5 kW
dimensions of the machine ca. 1000x750x1400 mm
weight of the ...

sheet width 2000 mm
plate thickness 20 mm
pre-bending 15/11
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
with initial ...

This AMADA HFT 50-20 Bending Machine was manufactured in 2009. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press ...

Machine type: Ring Bending Machine
Manufacturer: ZOPF
Type/Model: ZB 60 M
Year of construction: 1996
Machine condition: good
Offer type: used machine

This JORDI PH6100 180 Bending machine was manufactured in the year 2003 in Spain. Contact us anytime for further questions.
General Data
Machine weight: 27000 kg

Main drive

This GASPARINI XP 150/3000 Bending machine was manufactured in the year 2008 in Italy. It is equipped with a DELEM DA-69W control unit. It is included with tools. The machine has a problem to starting ...

This TRUMPF TRUMABEND V85S Bending machine was manufactured in 1995 in Germany and has 51193 hours. It is equipped with a Trumpf TrumaBend control unit. The machine does not start, and probably the ...

sheet width 2100 mm
plate thickness 3,5 mm
pre-bending 2,5 mm
roll diameter 130 mm
roll speed 4 m/min
total power requirement 3,8 kW
weight of the machine ca. 1,2 ...

sheet width 1020 mm
plate thickness 1,25 mm
pre-bending 1 mm
roll diameter 55 mm
weight of the machine ca. 180 kg
dimensions of the machine ca. 1,5 x 0,5 m
Manual ...

This ERMAKSAN POWER BEND PRO 3100-175 Bending machines machine was manufactured in 2018 in Turkey. The machine has a Cybelec cybtouch 12 PS 2D control panel with touch screen. It is equiped with a ...

This BYSTRONIC Xpert 200 x 3100 Bending machines machine was manufactured in 2011 in Germany. The machine has a bending length of 3100 mm and includes a box of bending tools.
General Data

Pipe bending machine
Type: Gigalus 130 S
Producer: Mewag
Year: 2014

bending and shaping of 3D pipes with a diameter of min. 40mm and wall thickness min. 4mm.
Based ...

FinnPower sheet metal processing center (Line) consisting of a fully automatic punching machine SG6 with STR stacking robot , high rack system, and an EBE5 bending machine.
the system is ...

Hydraulic universal profile bending machine make Zopf type C-602-HE including various accessories/tools

The machines are fully functional, well maintained and regularly serviced.

sheet metal bending machine
Type: OHP 1,5-6/6
Manufacturer: Zako
Year: 2015

Control: Siemens
Sheet length: 6000 mm
Sheet thickness: 1,5 mm
Machine in ...

2005 TUBOTRON TN 30 511NR
Pipe bending machine

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com
[TABELLE]Manufacturer ...

sheet width 1250 mm
plate thickness 1 mm
pre-bending -
shaft diameter 56 mm
weight of the machine ca. 170 kg
dimensions of the machine ca. 1,5 x 0,55 x 1 m
Manual ...

This PIT 63/30SB Bending machine was manufactured in 2002 in Romania. This machine has a pressure of 630 kN. Was installed with a 5.5 kW power.
General Data
Measurements width: 1160 mm

This ESPE CTO 250/4000N Bending machine was manufactured in the year 1995 in Czech Republic. The pression force of this machine is 250 T.
General Data
Machine weight: 18650

[TABELLE]
Zustand[NEUESPALTE]neu
[NEUEZEILE]Lagernummer[NEUESPALTE]1072-FSBM
[NEUEZEILE]Maschinenart[NEUESPALTE]Abkantpressen /Schwenkbiegemaschinen

Shaft diameter 30 mm
2 driven shafts
Right and left running
Accessories see photo

This TRUMPF TrumaBend V85X Bending machine was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard ...

good technical condition, can be tested under power

Details:
: 6 mm
: 2050
: 4
: Hydraulický

sheet width 1620 mm
plate thickness 3 (4) mm
pre-bending nein/no
roll diam. toproll 110 mm
roll diam. bottom roll 100 mm
plate thickness gro?er DM = 4 mm
weight of ...