Mașinile uzate: Automation & Robotics

Stäubli Roboter RX 90 mit Steuerung 
Hier bieten wir einen sehr gepflegten Stäubli Roboter an.
Typ: RX90
Steuereinheit RX 90-CS7
Hebegewicht ( Charge nominale-Kg) 6 ...

Stäubli Roboter RX 60 mit Steuerung 
Hier bieten wir einen sehr gepflegten Stäubli Roboter an.
Diese Einheit kommt aus einer Werkstattauflösung .
Typ: RX60

Stäubli Roboter RS60
Hier bieten wir Ihnen ein Stäubli Roboter RS60 an.
Hersteller: Stäubli
Technische Details
Traglast: 2 kg
Achsen: 4
Beschreibung

Bosch Rexroth Schwenkarmroboter turbo SCARA SR6 mit Steuereinheit
Hier bieten wir ein Bosch Rexroth Schwenkarmroboter turbo SCARA SR6 mit Steuereinheit an.
Bosch Rexroth Schwenkarmroboter ...

Stäubli Roboter RX 60B mit Steuereinheit
Hier bieten wir ihnen einen Stäubli Roboter RX 60B mit Steuereinheit an.
Roboter:
Hebegewicht ( Charge nominale-Kg) 2,5 kg
  ...

Bosch aico
Hier bieten wir einen Schwenkarmrobotoer an.
Bosch Schwenkarmrobotoer SR8 mit Kollmorgen Steuereinheit
Schwenkarmrobotoer
Typ: SR8
Steuereinheit Kollmorgen

Kuka Roboter
Hier bieten wir Ihnen einen Kuka Roboter an.

(Neuwertig/ungebraucht)
Kuka Roboter KR 60L30-3

Armlänge: 1220 mm

Achsen Anzahl: ...

Stäubli
Hier bieten wir Ihnen eine Montageeinheit mit Stäubli Sechsachsroboter TX90 mit Steuerung CS8C an.

IPTE Montageeinheit Gesamt Abmessung: 1700*1500*2100 mm (L*T*H)

Stäubli Mess-Roboter
Hier bieten wir ein sehr gepflegten Stäubli Mess-Roboter an.
Messrobotik zum messen, Analysieren und Bewerten von Qualitätsmerkmalen
RobFlow

Max. load: 5kg, weight: 350kg, including controls and documentation.

Ref.Nr.: INNO23842

Voltage: 100V, connected load: 3kVA, compressed air supply: 80l/min, year of construction unknown, including cartridge heater, the floppy drive is defective, programmes can currently only be imported ...

Voltage: 400V, connected load: 7kVA, compressed air supply: 80l/min, year of construction unknown, with jumper-wire unit and 21 cassettes with four conveyors each, the machine has an electrical defect ...

With documentation, an inspection is possible.

Ref.Nr.: INNO25783

Denso robot for laser inscription manual loading/unloading of the work items on the task/removal side. Automatic passage and labeling of the workpieces via roller conveyor track. Denso robot ...

RNA spiral conveyor 9 pieces in very good condition
3 pieces SRC-N250-2L
1 piece SRC-N200-2L
2 pieces SRC-N200-2R
1 piece SRC-B200-2R
1 piece SRC B200-2L
1 ...

Operating pressure: 5.5-8bar, connected load: 2kW, weight: 2t.

Ref.Nr.: INNO25643

Operating pressure: 6-8bar, connected load: 1.8kW, weight: 2.32t.

Ref.Nr.: INNO25642

Weight: 1.45t, with Industrial Robot Fanuc M20 iA, max. load: 20kg, the system has been idle for three years already.

Ref.Nr.: INNO25603

Catalog No. : 6855
Type: MA 1900
Producer: Motoman
Made in: 2012
Characteristic:
Hours on: 2200 h
The workplace consists of the following parts:

Number of axis: 6, load: 10kg, weight: 630kg, with controls and documentation, an inspection is possible.

Ref.Nr.: INNO25542

Number of axis: 6, load: 10kg, connected load: 5kVA, with Controls Yaskawa YASNAC XRC and documentation, an inspection is possible.

Ref.Nr.: INNO25541

4-axis palletizing robot as good as new, never in use
Payload 500 kg
Up to 1200 cycles/hour
Vertical reach 3024 mm
Horizontal reach 3159 mm
Weight 2300 kg

2 ...

Catalog No. : 4741
Type: IR-SA 840 M
Producer: Tiesse
Made in: 2006
Characteristic:
Table dimensions: 2410x930 mm
Height: 3300 mm
Width: 7000 mm

Catalog No. : 5788
Type: MC10L-01
Producer: NACHI
Made in: 2015
Characteristic:
Control system: NACHI FD11
Total station hours 1: 45 h
Total station ...

Catalog No. : 6169
Type: Motoman DX 100
Producer: YASKAWA
Made in: 2011
Characteristic:
Total hours: 12800 h
Hours on: 6000 h
Number of axis: 6

Max. load: 2.5t, connected load: 4kW, weight: 1.477t.

Ref.Nr.: INNO25241

Max. nominal load: 6t, face plate diameter: 1440mm, number of clamping grooves: 4, length: 3650mm, width: 1850mm, height: 700mm, weight: 5t, with documentation.

Ref.Nr.: INNO25240

Load: 6kg, weight: 112kg, with Controls Stäubli CS7 RX90, weight: 345kg, including documentation and pneumatic dual gripper.

Ref.Nr.: INNO25107

Details
number of controlled axis:6
workpiece weight:12 kg
throat:- mm
weight of the machine ca.:0,26 t

Catalog No. : 6619
Type: SONIX 0510i – H
Producer: YUDO-STAR
Made in: 2012
Characteristic:
Axis X: 2500 mm
Axis Y: 660 mm
Axis Z: 1000 mm

Number of axis: 6, nominal load: 90kg, controls: Engel, weight: 1.13t.

Ref.Nr.: INNO24963

Including controls, the robot needs overhauling.

Ref.Nr.: INNO24885

Memory: 128MB, including controls.

Ref.Nr.: INNO24884

number of controlled axis 6
workpiece weight . kg
throat . mm
Control System R-J
Number of working hours 38217 h
total power requirement kW
weight of the machine ...

weight max. 3000 kg
stroke 450 mm
speed 85 m/min
total power requirement 45 kW
weight of the machine ca. 15,7 t
dimensions of the machine ca. 4,8x2,34x3,65 m
weight ...

stroke . mm
weight max. 300 kg
speed . m/min
total power requirement . kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. . m
stroke . mm
weight ...

weight max. 12 t
work piece width 880 mm
total power requirement 130 kW
weight of the machine ca. 63,3 t
weight max. 12 t
work piece width 880 mm
total power ...

weight max. 1600 kg
Drive Diesel
motor Deutz
weight 13,6 t
weight max. 1600 kg
Drive Diesel
motor Deutz
weight 13,6 t
weight max. 1600 kg

weight max. 1000 kg
workpiece length . mm
work piece width . mm
Drive elektr.
total power requirement kW
weight of the machine ca. t
dimensions of the machine ...

weight max. 1000 kg
workpiece length . mm
work piece width . mm
vice capacity 15 KN
rotation movement 0-35 U/min
Speed 0-90 m/min
total power requirement 22 kW

weight max. 800 kg
workpiece length . mm
work piece width . mm
stroke 500 mm
total power requirement . kW
weight of the machine ca. 5 t
dimensions of the machine ...

number of controlled axis 6
workpiece weight Unbkt kg
throat bis 8000 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m

number of controlled axis unkt.
workpiece weight unbkt kg
throat unbkt. mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
The ...

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m

number of controlled axis 6
workpiece weight 180 kg
throat 2700 mm
total power requirement kW
weight of the machine ca. 1,43 t
dimensions of the machine ca. m