Mașinile uzate: Centre de prelucrare

The machine is in very good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Mazatrol: MATRIX 2
Aufspanntischfläche: 1300x550 ...

The machine is in good technical condition, under power, after agreement is possilbe to test it.
Tool probe RENISHAW OMP 40-2.
Control system Siemens 840 D SL.

Details:

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Fanuc: 0i - MC
Aufspanntischfläche: 790x560 mm
X ...

Good technical condition. Possible to test under poert. With toll probe and workpieces probe.

Details:
Steuerung Heidenhain : TNC 530
Aufspanntischfläche: 500 x 1100 mm

Catalog No. : 7420
Type: C42U dynamic
Producer: Hermle
Made in: 2020
Characteristic:
Control system: HEIDENHAIN TNC 640
Total hours: 8341 h
Hours ...

This EXERON DIGMA HSC 300 Vertical Machining centre was manufactured in the year 2008. It is equipped with a HEIDENHAIN 530 control unit. The machine comes with several extras and an automation ...

x-travel 630 mm
y-travel 500 mm
z-travel 500 mm
spindle taper SK 40
table surface area 800 x 500 mm
table load capacity 500 kg
control Siemens 810
IKZ ...

ARBEITSWEGE ANZ.ACHSEN

ARBEITSWEGE ANZ.ACHSEN

ARBEITSWEGE ANZ.ACHSEN

ARBEITSWEGE ANZ.ACHSEN

Details:
x-travel: 1250 mm
y-travel: 1100 mm
z-travel: 1250 mm
Control: Fanuc NC 16IM

Control: Sinumetrik 840D sl, operating hours: 41528h, spindle running time: 25436h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: ...

Traversal X/Y/Z: 670/820/600mm, swivel range: +/- 120°, tool storage: 120 places.
Table load: 1,200kg, spindle speed: 18.00 n/m, rotary table: Ø 800mm, endless 360 degree rotation.

This HÜLLER HILLE NBH 135 Speed Horizontal Machining centre was manufactured in the year 2004 in Germany. It is equipped with a Sinumerik 840d control unit. It is included with a double chamber ...

This Mazak VTC 300 C Vertical machining centre was manufactured in the year 2004. It is equipped with a spindle and a chip conveyor. The machine is included with 30 tools.
Main drive

Control: Sinumetrik 840D sl, operating hours: 41634h, spindle running time: 19155h.
Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm.
Tool ...

Travel XYZ: 3500/1000/750, 3-axis, speed range: 15000 rpm, tool magazine/tool holder: 40/SK40, control: Heidenhain TNC 426, chip conveyor: scraper belt conveyor. The machine is fully functional and ...

This HERMLE C 600 V Horizontal Machining center was manufactured in the year 1998 in Germany and has 29289 spindle hours. It is equipped with a HEIDENHAIN TNC 430 M control unit. It is included a ...

This POSmill E1100 Vertical machining center was manufactured in the year 2013 in Germany and has 7181 spindle hours. It is equipped with a HEIDENHAIN iTNC530 control unit. It comes with a 3-D ...

This FEELER QM-32 Vertical Machining Centre was manufactured in the year 2003 in Taiwan. It is equipped with a FANUC 18-m control unit. It is included with a Renishaw Tool Measurement System, ...

Machine type: CNC-Vertical-Double Column-Machining Center
Manufacturer: DECKEL-MAHO (DMG)
Type/Model: DMC 105 V linear
Year of construction: 2008
Machine condition: very ...

This HARTFORD MVP-11 3-axis Vertical Machining Centre was manufactured in 2018 in Taiwan. It is equipped with a 12000 rpm spindle with BT40 tool taper. The automatic tool changer has 24 slots and can ...

This EXERON Digma HSC 300/P 3-axis Vertical Machining Centre was manufactured in 2006 in Germany. It is equipped with a Heidenhain iTNC530 control unit and a 42000 rpm spindle. In addition to its 3 ...

This DMG DMU 105 MonoBlock Universal Machining center machine was manufactured in the year 2013 in Germany and has 24687 spindle hours. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit. It ...

This POSMILL E 2050 L HSCI Vertical Machining center machine was manufactured in the year 2015 in Germany and has 2750 spindle hours (since spindle renewal in April 2021). It is equipped with a ...

The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Steuerung Fanuc: 0i - MC
Aufspanntischfläche: 1150 x 520 mm
X ...

x-travel 1120 mm
y-travel 510 mm
z-travel 510 mm
control Mazatrol 640 M
table surface area 1460 x 510 mm
table load 0,8 t
rapid traverse 36 m/min
turning ...

This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control ...

This TONGTAI VP-8 Vertical Machining Centre was manufactured in 2016 in Taiwan. It has a table size of 900 x 510 mm with a max. table load of 500 kg and is equipped with a FANUC control. This 3-axis ...

This DECKEL MAHO DMU 60 MonoBlock 5-Axis Vertical Machining Centre was manufactured in 2005. It has a 18,000 rpm spindle with SK40 tool taper. The machine is operated with a MillPlus control.

This DMG MORI DMF 300-8 Universal machining center was manufactured in 2023. It is equipped with a SIEMENS 840D SL control unit and has 5 axis. The machine is completely new and has the full OEM ...

into operation 2007
Heidenhain workpiece probe
4 axis Walter (chuck diameter 315 mm)
about 60 tool holders
2023 spindle replacement with a refurbished one
2023 new ...

Possible to test under power.

Details:
Steuerung Heidenhain : TNC 530
Aufspanntischfläche: 1000x500 mm
X Weg: 750 mm
Y Weg: 500 mm
Z Weg: 500 mm

Details:
Steuerung Heidenhain : TNC 620
Aufspanntischfläche: 1500 x 800 mm
X Weg: 1510 mm
Y Weg: 810 mm
Z Weg: 810 mm
Spindeldrehzahl: 0 - 10000 ...

x-travel 800 mm
y-travel 700 mm
z-travel 600 mm
Control Heidenhain 426
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m

Catalog No. : 7409
Type: ARROW 500
Producer: CINCINNATI MILACRON
Made in: 1996
Characteristic:
Control system: ACRAMATIC A 2100
Number of stack positions: ...

Details:
turning length: 600 mm
max. turning diameter: 320 mm
swing diameter above cross guideway: 365 mm
control: CNC Pilot 4290 Heidenhain
turning speed ...

This DOOSAN DNM 500 (2012) 4-axis Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a 8,000 rpm spindle, BT40 tool taper, a 4th axis (lehmann rotary table - ...

Catalog No. : 7401
Type: QM-40 SA
Producer: Feller
Made in: 2007
Characteristic:
Control system: FANUC
Maximum rotary speed of the spindle: 20.000 1/min

This MAZAK INTEGREX i-800V/8 (2017) 5-Axis Universal Machining Centre (Turn-Mill) was manufactured in 2017 in Japan. It is equipped with a high torque milling spindle with scale feedback (max. 5.000 ...

This HURCO VMX24S 3-axis Vertical Machining Centre was manufactured in 2003 and is equipped with a 15000 rpm spindle, SK40. It comes with a 24x tool magazine and external water cooling. The control ...

This STAMA MC 326 TWIN Vertical Machining Centre was manufactured in 2000 in Germany. It has a Siemens control 840 D. It is equipped with a spindle with HSK63-A.
Control Unit
Brand: ...

mfg. year 2004

Reference Number:
24011

Year of Manufacture:
2004

Control:
PC Fusion 640 M

movements:
X-axis: 560 mm

x-travel 300 mm
y-travel 250 mm
z-travel 250 mm
table surface area 2 x 550 x 300 mm
spindle taper HSK-A 32
spindle taper DIN 69893
spindle turning speed - ...

X-axis: 1600mm, y-axis: 700mm, z-axis: 800mm, speed: 100-14,000/min, number of tool positions: 32, table dimensions: 520x700mm, number of T-slots: 7, spindle power: 25kW, connected load: 60kW, weight: ...

This CHIRON DZ15W MAGNUM HS Vertical Machining Centre was manufactured in 2015. It is equipped with a FANUC Series 31i-model B5 control unit, has 4 axes and a 12000 rpm spindle. The machine comes with ...

This MAZAK FJV-25 (1998) Vertical Machining center was manufactured in the year 1998 in Japan. It is equipped with a Mazatrol M-Plus control unit. This machine has a spindle with 12000 rpm. Disposes ...

This FAMU PHS 680 Machining centers (vertical) machine was manufactured in 2008 in Italy. The machine has a spindle speed of 30000 rpm. It is equipped with a CNC Heidenhain control unit and has 3 ...

This HAAS VF-7/40 Vertical Machining center was manufactured in 2014 in the United States. It is equipped with a HAAS control unit. The machine dispose of a 3 axis: X (2134 mm), Y (813 mm) and Z (762 ...