подержанные машины: Прессы

Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min.

Ref.Nr.: INNO25432

The press is in excellent technical condition and can be tested.

Details:
Presskraft: 160 t
Die Abmessungen des Desktop: 1240x860 mm
Einbauhöhe: 450 mm
Hubanzahl: ...

Catalog No. : 6777
Type: PH4C 200 T
Producer: Hidroliskan
Made in: 2015
Characteristic:
Pressing force: 200 t
Length of the table: 1800 mm
Width of ...

There are two identical cylinders available, max. pressure: 6bar, total stroke: 100mm, power stroke: 12mm, max. press force: 39.9kN, fast approach force: 1700mm, retracting force: 1900N, weight: ...

Max. hydraulic pressure: 400bar.

Ref.Nr.: INNO25357

pressure 100 t
throat 350 mm
stroke 8 - 100 mm
no. of strokes 60 Hub/min
daylight (stroke down, ram adjustment above) 300 mm
ram adjustment manuell 80 mm
table ...

Catalog No. : 4607
Type: F1 1250
Producer: SIMASV
Made in: 2011
Characteristic:
Pressing force: 300 kN
Maximum thickness of the sheet metal: 6.3 mm

Catalog No. : 4164
Type: LKT 250
Producer: SMERAL
Made in: 1977
Characteristic:
Pressing force: 250 t
Table: 1575 x 1150 mm
Max. ram stroke: 250 ...

Catalog No. : 4025
Type: CX 1000/30
Producer: EUROMAC
Made in: 2000
Characteristic:
Pressing force: 30 t
Max. Sheet thickness: 6 mm
Power demand: 4 ...

Catalog No. : 5831
Type: PKnT 160
Producer: ERFURT
Made in: 1987
Characteristic:
Pressing force: 160 t
Maximum number of strokes: 15 1/min
Power ...

Catalog No. : 5698
Type: LKT 250
Producer: METALPRESS
Made in: 1974, GO 2002
Characteristic:
Pressing force: 250 t
Length of the table: 1150 mm

Catalog No. : 5451
Type: 1250 F1
Producer: SIMASV
Made in: 2011
Characteristic:
Total hours: 87 h
Pressing force: 30 t
Maximum thickness of the ...

The machine is in very good technical condition, it is possible to test it by prior agreement.

Details:
Presskraft: 10 t
Die Abmessungen des Desktop: 450 x 320 mm
Max. ...

Details
pressure:12 t
throat:220 mm
stroke:6-66 mm
no. of strokes:160 Hub/min
sheet thickness - max.:2 mm
ram adjustment:42 -12 mm
table::585 x 400 mm

Catalog No. : 6731
Type: CX 1000/30
Producer: EUROMAC
Made in: 1999
Characteristic:
Pressing force: 30 t
Maximum stroke speed: 200 mm/s
Travel length ...

Catalog No. : 6351
Type: Pega 30507
Producer: AMADA
Made in: 1997
Characteristic:
Pressing force: 294 kN

Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin.

Lagernummer:
1106-PR179

Maschinenart:
Hydraulische Presse

Fabrikat:
DUNKES

Typ:
HZS 160

Baujahr:
1993

pressure 50 t
throat 250 mm
stroke 6/98 mm
ram adjustment 75 mm
no. of strokes 60 - 90 Hub/min
table height adjustment 150 mm
table surface area 700 x 500 mm

pressure 20,0 t
chamfer lenght 850 mm
distance between columns 850 mm
back stop - adjustable 375 + 400 mm
stroke of upper beam 196 mm
dayligth 470 mm
ajustment ...

pressure 20 t
throat 185 mm
stroke 100 mm
table surface area 380 x 350 mm
dayligth 250 mm
table height over floor 840 mm
total power requirement 4 kW
weight ...

Catalog No. : 6700
Type: 3000 kN
Producer: Loire
Made in: 1992 GO 2008
Characteristic:
Control system: SIEMENS SIMATIC OP17
Pressing force: 3000 kN

Catalog No. : 6701
Type: 4000 kN
Producer: Hydraulico
Made in: 1977
Characteristic:
Control system: SIEMENS SIMATIC OP
Pressing force: 4000 kN
Ram ...

gebraucht
2015
7290
prompt, Zwischenverkauf v
T?rkei
21400 ?
1
40 to
630 mm
450 mm
150 mm
5 - 75 mm
153 ...

pressure 630 KN
distance between columns 800 mm
stroke 150 mm
table surface area 720x550 mm
ram surface 720x520 mm
dayligth 420 mm
rapid drop speed 394 mm/sec

pressure 400 t
throat 400 mm
stroke 40 - 140 mm
number of strokes - idle run 32 min-1
ram adjustment 125 mm
table surface area 1250 x 750 mm
dayligth min/max ...

pressure 20,0 t
stroke 185 mm
table surface area 170 mm Breite
column travel between the guideways 510 mm
weight of the machine ca. 112 kg
dimensions of the machine ca. ...

The machine is in excelent condition. Possible to test under power.
Control system Siemens SIMATIC HMI PANEL – KTP 900 BASIC, BOOTLOADER verze: V02.03

Details:
Presskraft: ...

Pressing force: 160t, with spare table, without documentation, needs official accident prevention test, has not been serviced for a long time.

Ref.Nr.: INNO25165

Stroke adjustment: 29-160mm, ram adjustment: 130mm, stroke speed: 48/min, connected load: 14kW.

Ref.Nr.: INNO25155

Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure.

Ref.Nr.: INNO25141

+ Control system completely renewed in 2015Press Design
drive system:  knuckle-joint
feedstock transport direction:  left to right

Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation.

Ref.Nr.: INNO25027

Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation.

Ref.Nr.: INNO25026

There are two identical eccentric presses available, nominal force: 1000kN, stroke speed: 30-85/min, stroke adjustment: 20-125mm, weight: 8t, year of construction machine 1/ 2: 1978/ 1981, with ...

Catalog No. : 4437
Type: AD SERVO 25100
Producer: DURMA
Made in: 2011
Characteristic:
Control system: Cybelec
Pressing force: 100 t
Maximum bending ...

Einständer - Exzenterpresse WEINGARTEN Typ EV 63
Masch. Nr. 738 / 61 Baujahr 1962
Druckleistung 63 ton.
Ausladung 260 mm
Tischfläche 630 x 530 mm
Tischöffnung Ø 210 ...

Catalog No. : 6612
Type: Trumatic 500
Producer: Trumpf
Made in: 1995
Characteristic:
Total hours: 69739 h
Pressing force: 220 kN
Maximum length of ...

Catalog No. : 6472
Type: A4
Producer: FINN-POWER
Made in: 1997
Characteristic:
Control system: Siemens Sinumerik 840 D
Total hours: 6100 h
Pressing ...

Catalog No. : 6435
Type: MTX Flex 6
Producer: Euromac
Made in: 2014
Characteristic:
Software: RADAN
Total hours: 19932 h
Hours on: 12452 h

Catalog No. : 6606
Type: LDC 250
Producer: SMERAL
Made in: 1980
Characteristic:
Pressing force: 250 t
Length of the table: 2450 mm
Width of the ...

Catalog No. : 6556
Type: PKnT 315
Producer: ERFURT
Made in: 1987
Characteristic:
Pressing force: 315 t
Length of the table: 1400 mm
Width of the ...

Catalog No. : 6536
Type: TRUMATIC 500 R
Producer: Trumpf
Made in: 2000
Characteristic:
Software: BOSCH
Hours on: 36200 h
Pressing force: 220 kN

Details:
Control Name: NC
Origin: Türkiye
Condition: NEW
Delivery Terms: immediately
Quotation: Free on truck from location

pressure: 10 t
stroke ...

Details:
Control Name: NC
Origin: Türkiye
Condition: NEW
Delivery Terms: According to the arrangement
Quotation: Free on truck from location

pressure: 20 ...

Details:
Control Name: NC
Origin: Türkiye
Condition: NEW
Delivery Terms: According to the arrangement
Quotation: Free on truck from location

pressure: 40 ...

Details:
Control Name: NC
Origin: Türkiye
Condition: NEW
Location: Ennepetal - Hall 1
Delivery Terms: immediately
Quotation: Free on truck from location

Details:
Control Name: NC
Origin: Türkiye
Condition: NEW
Delivery Terms: According to the arrangement
Quotation: Free on truck from location

pressure: 80 ...

Details:
Control Name: NC
Origin: Türkiye
Condition: NEW
Delivery Terms: According to the arrangement
Quotation: Free on truck from location

pressure: 100 ...

pressure 63 t
stroke 617 mm
table surface area 800 x 550 mm
dayligth 1012 mm
throat 320 mm
rapid drop speed 105 mm/sec
work speed 13 mm/sec
return speed max. ...