подержанные машины: Bending machines

The machine is in excellent condition, it can be retested.

Details:
Max. Blechdicke: 3,2 mm
Blechbreite: 1524 mm
Antriebsart bender: Hydraulický
Max. ...

Rohrbiegemaschine - Dornbiegemaschine TRACTO-TECHNIK Typ Transfluid DB 2060 K
Serien. Nr. 70173 Baujahr 2004
Biegeleistung (Stahl) max. Ø 76,1 x 3,0 mm
Biegeleistung (Edelstahl) ...

Machine in good technical condition, plugged, can be tested.

Details:
Max. Blechdicke: 9 mm
Blechbreite: 1550 mm
Anzahl von Biegezylindern: 4
Antriebsart: ...

The machine can be tested in good technical condition. Hydraulic clamping, bending. Automatic shear.

Details:
Max. Blechdicke: 1 mm
Blechbreite: 6000 mm
Antriebsart ...

50 mm
8,5 U/min
100 kN
roll diameter 162 mm
Drive 1,5 kW
range L-W-H 1100x800x1500 mm
weight 450 kg
Equipment / Accessories:
- Two driven rollers

60x3 mm
60x2,5 mm
35 mm
64x4 mm
R10-R300
bending speed 2 U/min
total power requirement 1,5 kW
weight of the machine ca. 130 kg
dimensions of the ...

roll diameter 50 mm
roll diam. toproll 155 mm
roll diam. bottom roll 155 mm
total power requirement 1,5 kW
dimensions of the machine ca. 1000x750x1400 mm
weight of the ...

sheet width 2000 mm
plate thickness 20 mm
pre-bending 15/11
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
with initial ...

This AMADA HFT 50-20 Bending Machine was manufactured in 2009. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press ...

Machine type: Ring Bending Machine
Manufacturer: ZOPF
Type/Model: ZB 60 M
Year of construction: 1996
Machine condition: good
Offer type: used machine

This JORDI PH6100 180 Bending machine was manufactured in the year 2003 in Spain. Contact us anytime for further questions.
General Data
Machine weight: 27000 kg

Main drive

This GASPARINI XP 150/3000 Bending machine was manufactured in the year 2008 in Italy. It is equipped with a DELEM DA-69W control unit. It is included with tools. The machine has a problem to starting ...

This TRUMPF TRUMABEND V85S Bending machine was manufactured in 1995 in Germany and has 51193 hours. It is equipped with a Trumpf TrumaBend control unit. The machine does not start, and probably the ...

sheet width 2100 mm
plate thickness 3,5 mm
pre-bending 2,5 mm
roll diameter 130 mm
roll speed 4 m/min
total power requirement 3,8 kW
weight of the machine ca. 1,2 ...

sheet width 1020 mm
plate thickness 1,25 mm
pre-bending 1 mm
roll diameter 55 mm
weight of the machine ca. 180 kg
dimensions of the machine ca. 1,5 x 0,5 m
Manual ...

This ERMAKSAN POWER BEND PRO 3100-175 Bending machines machine was manufactured in 2018 in Turkey. The machine has a Cybelec cybtouch 12 PS 2D control panel with touch screen. It is equiped with a ...

This BYSTRONIC Xpert 200 x 3100 Bending machines machine was manufactured in 2011 in Germany. The machine has a bending length of 3100 mm and includes a box of bending tools.
General Data

sheet width 1250 mm
plate thickness 1 mm
pre-bending -
shaft diameter 56 mm
weight of the machine ca. 170 kg
dimensions of the machine ca. 1,5 x 0,55 x 1 m
Manual ...

This PIT 63/30SB Bending machine was manufactured in 2002 in Romania. This machine has a pressure of 630 kN. Was installed with a 5.5 kW power.
General Data
Measurements width: 1160 mm

This ESPE CTO 250/4000N Bending machine was manufactured in the year 1995 in Czech Republic. The pression force of this machine is 250 T.
General Data
Machine weight: 18650

Shaft diameter 30 mm
2 driven shafts
Right and left running
Accessories see photo

This TRUMPF TrumaBend V85X Bending machine was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard ...

good technical condition, can be tested under power

Details:
Max. Blechdicke: 6 mm mm
Blechbreite: 2050 mm
Anzahl von Biegezylindern: 4
Antriebsart: Hydraulický

sheet width 1620 mm
plate thickness 3 (4) mm
pre-bending nein/no
roll diam. toproll 110 mm
roll diam. bottom roll 100 mm
plate thickness gro?er DM = 4 mm
weight of ...

This VEB PYE/25/1 Bending machine was manufactured in the year 1975.
General Data
Machine weight: 2000 kg

sheet width 1500 mm
plate thickness 1,25 mm
pre-bending -
total power requirement 0,75 kW
weight of the machine ca. 460 kg
dimensions of the machine ca. 2 x 0,6 x 1 m

This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for ...

This KOMAGE S 50 4E CNC Hydraulic Press was manufactured in the year 2017 in Germany by the Komage Gellner Maschinenfabrik KG. It has a pressing force of 500 kN. The machine is in a very condition as ...

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and ...

This TECHNOLOGY ITALIANA TP GAMMA SE 2510 Bending machine was made in 2022. The machine has a pressing force of 250 kN. It has still one year of warranty included.
General Data

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.
Control Unit

ROLLER STRAIGHTENER MODEL EAF-4/40
Strip & wire straighteners
Number or rollers of wire 10
Number of rollers for steel strip 5
Maximun diameter of wire 4 mm
Maximun ...

Max. Press force: 200 kN (20 t)
Stroke 220 mm
Tool height 130 mm
Bolt diameter: 60 mm
Lift release via foot switch
Weight: approx. 600 kg
"
}, {

This WEMO Punching-Bending-System was manufactured in the year 1992 in Germany. It is in good condition due conscientious and documented maintenance.
The machine is still in operation and can ...

sheet width 2040 mm
plate thickness 2.5 mm
pre-bending 2.0 mm
diameter of upper rolls 110 mm
side roll diameter 110 mm
diameter of lower rolls 110 mm
speed 6.0 ...

sheet width 1050 mm
plate thickness 1.50 mm
pre-bending 1.25 mm
diameter of upper rolls 65.0 mm
diameter of lower rolls 65.0 mm
side roll diameter 65.0 mm
speed ca. ...

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a ...

This Beyeler PR6 Bending machine was manufactured in the year 1997. It is equipped with a DNC 800 control unit. The machine has a pressing force of 1000 kN and a bending length of 3100 mm.

This RAS FLEXIbend 73.40 Bending machine was manufactured in the year 2005 in Germany. It is equipped with a SYSTEM 6000 TOUCH control unit. The machine has a bending length of 4060 mm.
General ...

BEMA bending machine - diameter range fi 50 mm to fi 152.4 mm

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com
[TABELLE]Manufacturer ...

Machine type: Swivel Bending Machine
Manufacturer: RAS
Type/Model: 61.1
Year of construction: 1965
Machine condition: good
Offer type: used machine

Right-and left-hand running of the rollers via foot switch
Role delivery: manual
Shaft diameter: 50 mm
Driving roller and feed roller diameter: 155 mm
Stroke length ...

Univ. Rohrbiegemaschine Dornbiegemaschine TRACTO-TECHNIK
Typ TUBOFORM 28 - 1500
Serien Nr. S002 Baujahr 1998
Rohraussendurchmesser (Stahl) 4 - 28 mm (max. Ø 28 x 3 mm)

Hydraulic mandrel bending machine with a lot of accessories
Pre-selection of 8 different bending angles with digital display
Digital length display as well as digital display of ...

Route of the axles:
X: 300 mm
Y: 350 mm
Z: 200 mm
Weight: approx. 800 kg

Motorized swivel bending machine
Manufacturer Fasti
Type 2095-20-2
Sheet power 2040 x 2 mm at 400 N/mm2
Digital display of the bending angle
Foot pedal
...

Hydraulic swivel bending machine
Year of construction 1978
Power 2.000mm x 2,5mm
Engine 2,2KW
Weight approx. 2,8to
Technically good condition
Condition ...

Hydraulic segment press brake
Specifications
Printing capacity approx. 30to
Working width approx. 1,500mm
Backgauge with 3 pieces of stop riders on each side, linearly ...

Catalog No. : 7143
Type: 100
Producer: BOW
Made in: GO 2022
Characteristic:
Number of pulleys: 3 pcs
Standard diameter of pulleys: 150 mm
Shaft ...

The machine is in good technical condition, under power, after agreement is possible to test it. Including stand for large circle and feeding table 10 m.

Details:
Max. Blechdicke: ...