подержанные машины: Металлоформовочные станки

This Tauring Alfa 200 Tube Bending machine was manufactured in the year 2007 in Italy.
General Data
Machine weight: 7550 kg

This RAS 62.30 TURBObend Plus bending machine was made in the year 2004. It is equipped with a Ras CNC 6000 control unit. The machine has a sheet length of 2540 mm and a max. sheet thickness of 2 ...

This ERMAKSAN AP 2100-35 Bending machine was manufactured in the year 2005 in Turkey. The machine has a pressing force of 350 kN.
General Data
Measurements height: 2288 mm

This Ermaksan AP 3100-120 Bending machine was made in 2002 in Turkey. The machine has a pressing force of 1200 kN.
General Data
Measurements width: 2170 mm
Measurements depth: 3400 ...

This Blecken PPE SE-3160 Bending machine was manufactured in the year 2007 in Spain. It is equipped with a Delem ER-70 control unit and has 4 axis. The machine has a pressing force of 1600 kN and a ...

This HACO ERM 36150 bending machine was made in the year 2014 and has 1962 hours. It is equipped with a CONTROLLER M8519T control unit. The machine has a pressing force of 150 kN. Robot can be ...

The machine is in good technical condition and can be tested.

Details:
Max. Blechdicke: 10 mm
Blechbreite: 3000 mm
Anzahl von Biegezylindern: 4
Antriebsart: ...

This ERMAK CNCHAP 3600x200 Bending machine was manufactured in the year 2005 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit. The machine has a pressing force of 2000 kN and a bending ...

This Bystronic Xpert 250/4100 Press Brake Machine was built in the year 2016 in Germany and has 17550 hours. The machine has a pressing force of 2500 kN.
General Data
Machine weight: 22400 ...

This KOMAGE S 50 4E CNC Hydraulic Press was manufactured in the year 2017 in Germany by the Komage Gellner Maschinenfabrik KG. It has a pressing force of 500 kN. The machine is in a very condition as ...

This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a ...

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and ...

This TECHNOLOGY ITALIANA TP GAMMA SE 2510 Bending machine was made in 2022. The machine has a pressing force of 250 kN. It has still one year of warranty included.
General Data

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.
Control Unit

This TRUMPF TrumaBend V85X Bending machine was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard ...

This WEMO Punching-Bending-System was manufactured in the year 1992 in Germany. It is in good condition due conscientious and documented maintenance.
The machine is still in operation and can ...

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.
Main drive
Pressing force: 2500 kN

This STAR-BEND STAR 800 CN6/GEN/L Bending machine was manufactured in the year 2006 in Italy. It is equipped with a STAR-BEND control unit and has 6 axis.
Control Unit
Brand: STAR-BEND

pressure 85 t
chamfer lenght 2550 mm
distance between columns 2050 mm
stroke 365 mm
control DELEM
weight of the machine ca. 10000 kg
The data for this ad was ...

This AMADA HFT 50-20 Bending Machine was manufactured in 2009. It has a maximum press force of 500 kN, a maximum stroke of 200 mm and a foreseen power of 6 kW. In total is weighs 4.7 tons. This press ...

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a ...

This JORDI PH6100 180 Bending machine was manufactured in the year 2003 in Spain. Contact us anytime for further questions.
General Data
Machine weight: 27000 kg

Main drive

This Beyeler PR6 Bending machine was manufactured in the year 1997. It is equipped with a DNC 800 control unit. The machine has a pressing force of 1000 kN and a bending length of 3100 mm.

This RAS FLEXIbend 73.40 Bending machine was manufactured in the year 2005 in Germany. It is equipped with a SYSTEM 6000 TOUCH control unit. The machine has a bending length of 4060 mm.
General ...

This GASPARINI XP 150/3000 Bending machine was manufactured in the year 2008 in Italy. It is equipped with a DELEM DA-69W control unit. It is included with tools. The machine has a problem to starting ...

This TRUMPF TRUMABEND V85S Bending machine was manufactured in 1995 in Germany and has 51193 hours. It is equipped with a Trumpf TrumaBend control unit. The machine does not start, and probably the ...

This ERMAKSAN POWER BEND PRO 3100-175 Bending machines machine was manufactured in 2018 in Turkey. The machine has a Cybelec cybtouch 12 PS 2D control panel with touch screen. It is equiped with a ...

This BYSTRONIC Xpert 200 x 3100 Bending machines machine was manufactured in 2011 in Germany. The machine has a bending length of 3100 mm and includes a box of bending tools.
General Data

This EKAL REP-40-200-3 Bending machine was manufactured in the year 1993 in Germany. It is equipped with an EKAL MT-80 control unit.
This is an EKAL pipe end press for forming pipe ends. With ...

This PIT 63/30SB Bending machine was manufactured in 2002 in Romania. This machine has a pressure of 630 kN. Was installed with a 5.5 kW power.
General Data
Measurements width: 1160 mm

This Schröder Fasti 145-18/075 Bending machine was manufactured in the year 2008 in Germany.
General Data
Machine weight: 1920 kg


Machine Benefits
Technical ...

This OSCAM MULTIBEND 16 Bending machine was manufactured in the year 1999 in Italy. It is equipped with a BECKHOFF control unit.
General Data
Measurements width: 2350 mm
Measurements ...

This ESPE CTO 250/4000N Bending machine was manufactured in the year 1995 in Czech Republic. The pression force of this machine is 250 T.
General Data
Machine weight: 18650

This EHT VarioPress 225-30 Bending machine was manufactured in the year 1997 in the Netherlands.

Machine Benefits
Technical Machine Benefits:
- Crowning & back gauge

This Durma AD-R 30220 Bending machine was manufactured in the year 2012 in Turkiye. The machine has a pressing force of 2200 kN and a bending length of 3050 mm.
General Data
Machine ...

This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of ...

This OTINUS PBO 2312N Bending machines machine was manufactured in 2021. This equipment features the E21 control system with a backgauge along the X-axis and beam adjustment along the Y-axis. It ...

This Durma AD-S 40320 Bending machine was manufactured in the year 2012 in Turkey and has 35040 working hours. It is equipped with a Cybelec ModEva 10S control unit. Contact us anytime for further ...

This TRUMPF TruBend Center 7030 Bending machine was manufactured in the year 2019 and has 901 production hours. Contact us anytime for further questions
General Data
Machine weight: 31000 ...

This UZMA UPB-100 bending machine, produced in 2014, features upper and bottom roll shafts both measuring 100 mm and a roll diameter of 315 mm. Designed for efficiency, it offers a working speed of 7 ...

This 3-axis Durma E 2590 bending machine, manufactured in 2006, is optimized for precise sheet metal bending. It offers a substantial bending force of 90 tons and accommodates a bending length of ...

This Safan CNCL-K 170-3100 TS1 bending machine was manufactured in 2002. It boasts a capacity of 170 tons and can handle lengths up to 3100mm. The machine is equipped with a hydraulic tool holder and ...

sheet width 2040 mm
plate thickness 6,00 mm
distance between columns mm
stroke 300 mm
total power requirement kW
weight of the machine ca. 6,00 t
dimensions of ...

pressure 050 t
chamfer lenght 1600 mm
distance between columns mm
stroke 150 mm
throat 390 mm
total power requirement 5,50 kW
weight of the machine ca. 4,80 t

Details:
plate thickness: 1,2 mm
0: 62 mm
weight of the machine ca.: 50 kg

pressure 225 t
chamfer lenght 3050 mm
distance between columns 2550 mm
column arm 300 mm
ajustment speed 110 mm/sec
work speed 9.0 mm/sec
return speed 130 mm/sec

pressure 170 t
chamfer lenght 4080 mm
distance between columns 3680 mm
column arm 410 mm
dayligth 385 mm
stroke 215 mm
ajustment speed 200 mm/sec
working feed ...

sheet width 1520 mm
plate thickness 4.50 mm
thickness at "Niro-steel" 2.25 mm
distance between columns 1600 mm
stroke of upper beam 360 mm
work height max. 900 mm

plate thickness 3.0 mm
throat max. 500 mm
work speed 6.0 + 12.0 m/min
distance Walze 125 / 150 mm
roll diameter 125 mm
voltage 400 V
total power requirement 1.3 / ...

neu
ca. 12 Wochen ab Auftrags
T?rkei
82900 ?
1666.29 ?
2050 mm
20 mm
20 mm
16 mm
16 mm
12 mm
280 mm
280 mm
...