подержанные машины: Вертикальные сверлильные станки

Lagernummer:
1106-BO289a

Maschinenart:
Ständerbohrmaschine

Fabrikat:
WMW "FRITZ HECKERT"

Typ:
BK 50 AI

Machine type: pillar drills
Country of origin: Germany
Storage location: in stock

Technical details
tapping performance: max. M 16

Pillar drill TNW 45 Super Condor

drilling-capacity: 45 mm
Spindle: MT 4
Discharge: appr. 350 mm
Drilling-depth: appr. 150 mm
8 spindle speeds from 60 to 1000 ...

bore capacity in steel (diameter) . mm
throat 450 mm
bore stroke 350 mm
table surface area 600x500 mm
spindle diameter 100 mm
Feed 0,06-0,63 mm/U
total power ...

Details:
Condition: good used
Location: Ennepetal - Halle 3
Delivery Terms: immediately
Quotation: Ab Lager - Frei Verladen auf Lkw

bore capacity in steel ...

High-performance drilling machine, machine number 511

Technical data:
mounting table: 300 x 400 mm
quill ram: 120 mm
speed range: 5800 rpm
gearbox stages: 2

Zustand (technisch): 4 (von 5)
Zustand (optisch): 4 (von 5)
Papierformat:
Verfügbar ab: Sofort
Machine ist:auf Lager
Preis: auf Anfrage

-2 Spindel ...

Dauerbohrleistung in St 60: 18 mm
Normalbohrleistung: 20 mm
Gewindeschneidleistung: M 12
Spindel: MK 2
Bohrtiefe: 100 mm
Ausladung: 225 mm
Abstand ...

Magnetic drilling machine type AX 32 with
Drilling machine AEG with MK 2

Keep in mind that the advertisement was translated automatically and may have errors. We are not responsible ...

Bearing number:
1106-BO298

Machine type:
Stand drilling machine

Fabricate:
BULTHARDT

Type:
3 BEV

Year of construction:

The F 22 is a very robust industrial drilling machine.
A column group with a diameter of 98 mm and the machine weight form the basis for their outstanding stability in this class.
The ...

The SERRMAC V 16 is the cheapest from the SERRMAC delivery program.
It is suitable for simple drilling tasks or as an add-on machine to production systems, as well as for craft businesses.

The SERRMAC V 22 is an inexpensive variant of the MK 2 class.
The model V 22 E is the right choice for users who need to adjust the speed optimally to a specific work task and still prefer an ...

When tapping with a guide cartridge (positive feed), the tap / former is guided into the workpiece via the guide cartridge without the usual gate.
The guide cartridge must always match the pitch ...

When tapping with a guide cartridge (positive feed), the tap / former is guided into the workpiece via the guide cartridge without the usual gate.
The guide cartridge must always match the pitch ...

When tapping with a guide cartridge (positive feed), the tap / former is guided into the workpiece via the guide cartridge without the usual gate.
The guide cartridge must always match the pitch ...

When tapping with a guide cartridge (positive feed), the tap / former is guided into the workpiece via the guide cartridge without the usual gate.
The guide cartridge must always match the pitch ...

Drilling machine with coordinate table, VRB 6/20-NC, SK40, X-600,