подержанные машины: Фрезерные станки

Technische Daten:

Wege x/y/z: 400 mm / 210 mm / 300 mm
Tischaufspannfläche: 390 mm x 600 mm
Werkzeugaufnahme: ISA 40
Spindeldrehzahlbereich: 40 - 2.000 U/min 

Technische Details:
x-Weg: 4300 mm
y-Weg: 1000 mm
z-Weg: 1050 mm
Maschinengewicht ca.: 35 t

TISCHLÄNGE TISCHBREITELÄNGSWEG

x-travel 3500 mm
y-travel 1083 mm
z-travel 1074 mm
control HEIDENHAIN iTNC 530 HSCI
clamping table -
surface area 4.000 x 1.000 mm
Thread bore with fitting -

x-travel 3.000 mm
y-travel 1.600 mm
z-travel 1.200 mm
control HEIDENHAIN iTNC530 HSCI
B-axis (swivelling head) +/- 100 ?
C-axis (milling head rotation axis) +/- 240 ?

Catalog No. : 7187
Type: Varimat VD 2000
Producer: KOLB
Made in: 1995
Characteristic:
Operating system: SIEMENS Sinumerik
Axis X: 6000 mm
Axis Y: ...

Lining width: max. 200 mm lining depth: 40 mm profile height: max. 100 mm screw pitch span: 100 mm feed rate: max. 500 mm speed: 2,800 U per minute Electric cargo feed by Betaeeration of the foot ...

Milling machine from a training workshop in very good condition
Manufacturer lid
Type FP1 Active

Universal milling machine vertically / horizontally from a training workshop
Manufacturer Hermle
Type FW801
Tool holder SK40
automatic feed in three axes
...

Universal milling machine
Manufacturer Kunzmann
Type UF 8 /3
Y.O.M. 1977
Automatic feed in three axes, infinitely adjustable
Rapid passage
Tool holder ...

Universal milling machine Lagun from a training workshop in top condition!
Head universally rotate, swivel and tilt.
Type: FTV2
YOC 2006
Tool holder SK40
...

Tool milling machine from a training workshop in very good condition
Manufacturer Klopp Korradi
Year of construction 1991
Digital
SK40
automatic feed in three ...

CNC tool milling machine from a training workshop in very good condition
Manufacturer Maho
Type MH500E2
YOC 1991
Control 432
Color monitor
Machine ...

Details:
x-travel: 2.000 mm
y-travel: 1.200 mm
z-travel: 760 mm
Control: SIEMENS 810D
table-size: 2.200 x 1.100 mm
table weight: 3.500 Kg

The machine was overhauled and modernized in 2006.

CNC control: Siemens Sinumerik 840 D

Table diameter: 2000 mm
Max. wheel diameter: 3000 mm
Gear width: 1000 ...

Maschine hat einen defekt an der Hauptspindel

CNC Vertikal Bearbeitungszentrum CHIRON Typ FZ 22 L high speed
Fertigungszentrum mit CNC Steuerung FANUC Series 21-M
Fabr. Nr. ...

Catalog No. : 7169
Type: RM 80
Producer: Wera
Made in: 2002
Characteristic:
Operating system: SIEMENS SINUMERIK
Maximum diameter of the gear wheel: 80 ...

Details:
x-travel: 3000 mm
y-travel: 1600 mm
z-travel: 760 mm
Control: Fanuc 18i MB
column daylight: 1700 mm
table surface area: 3260x1500 mm

Details:
x-travel: 3000 mm
y-travel: 1600 mm
z-travel: 760 mm
Control: Fanuc 18i MB
column daylight: 1700 mm
table surface area: 3260x1500 mm

Details:
x-travel: 3000 mm
y-travel: 1970 mm
z-travel: 920 mm
Control: Fanuc 18 M
column daylight: 2200 mm
tool taper: 50
spindle turning speed ...

x-travel 300 mm
y-travel 120 mm
z-travel 120 mm
clamping range 190 x 160 mm
Required air-pressure 6 bar
distance spindle /table 21,5 mm
turning speeds 12000 ...

Deckel Fräsmaschine FP 4 A
Deckel Fräsmaschine FP 4 A Contur 2
x-Weg
485 mm
y-Weg
385 mm
z-Weg
380 mm
Spindelaufnahme
SK 40

Details:
x-travel: 4.500 mm
y-travel: 1.800 mm
z-travel: 1.200 mm
Control: HEIDENHAIN ITNC - 530
handwheel: HEIDENHAIN 520
milling head -swivable +/-: ...

The machine is in very good condition and comes from a
from a training workshop.

Equipment:
Safety cover and LED lamp retrofitted in 2016
3-axis active digital readout ...

well-maintained machine, ready for immediate use, the machine does not have a tool changer

Technical data:
X: 650 mm
Y: 500 mm
Z: 450 mm
table size: 1.100 x 600 ...

Catalog No. : 7133
Type: FGS 40
Producer: TOS
Made in: 1992
Characteristic:
Control system: Heidenhain TNC 407
Length of the working table: 1120 mm

The machine is in good technical condition, possible to test under power.

Details:
Die Abmessungen des Desktop: 1370 x 356 mm
X Weg: 787 mm
Y Weg: 508 mm
Z Weg: ...

Technische Daten:
Arbeitsbereich
X Achse: 500 mm
Y Achse: 400 mm
Z Achse: 300 mm
Arbeitsspindel
Werkzeugaufnahme: ISO 40
Autom. Vorschübe: 0,2 - 0,6 - ...

The machine is in good technical condition, under power, after agreement is possible to test it.
GO angle head.
2 x chip ejector, controlled indexed head by 1°.

Details:

controlled universal milling head, indexed
indexing – axis B by 15°: 0 to 90; 0 to -90°. In the C axis – only horizontal or vertical – C0 or C180
spindle taper BT 50

The machine is in good technical condition, possible to test under power.

Details:
Die Abmessungen des Desktop: 400 x 256 mm
X Weg: 450 mm
Spindelkegel: SK 40 .
Y ...

The machine is in very good condition and comes from a
a training workshop.

Equipment:
Safety cover and LED lamp retrofitted in 2016
3-axis active digital readout from ...

Inv. Num. : 7081
Type: KB 14 M. POS
Produzent: KNUTH
Erzeugt: 2007
Parametern:
Nennstrom: 9 kW
In gutem technischen Zustand.

Machine type: universal milling machine
Control type: conventional
Country of origin: Germany
Storage location: in stock

Technical details
table size:: ...

x-travel 3000 mm
y-travel 1000 mm
z-travel 1000 mm
Control Heidenhain
total power requirement kW
weight of the machine ca. 13,5 t
dimensions of the machine ca. ...

x-travel 3000 mm
y-travel 1000 mm
z-travel 1000 mm
Control Heidenhain
total power requirement kW
weight of the machine ca. 13,5 t
dimensions of the machine ca. ...

The machine is functional.

Details:
Steuerung Acramatic: 2100 CNC
Die Abmessungen des Desktop: 6096 x 3048 mm
X Weg: 6096 mm
Durchgang zwischen den Ständern: ...

The machine has pneumatic tool clamping,
manually adjustable speed 45-2000 rpm,
automatic work cycles in the X axis,
console drop
automatic deletion.
It is under power ...

x-travel 750 mm
y-travel 250 mm
z-travel 400 mm
spindle taper ISO 40 ISO
table: 1270 x 260 mm
feed: 24 - 402 mm/min.
turning speeds 45 - 1660 U/min
distance ...

Catalog No. : 7051
Type: UMS 710
Producer: MIKRON
Made in: 1996
Characteristic:
Control system: Heidenhain TNC 426
Length of the working table: 1000 mm

Vertical machining centre DEPOCUT 2012, TAJMAC-ZPS
-Used machine, Construction Year 2013
-CNC control HEIDENHAIN iTNC 530
-X-Axis = 2.000 mm
-Y-axis = 1.200 mm

Vertikal-Konsolfräsmaschine FSS 400-V, WMW HECKERT
- konventionell
- Frässpindel ISO 50
- Schwenkbereich Fräskopf = +/- 45°
- Aufspannfläche = 400 x 1.600 mm, 5 ...

FPT Fahrständer CNC Fräsmaschine mit PLattenfeld 5000 x 2000 mm Verfahrwege 4000x2000x1200 mm. Spindel 4000 1/min. 2 Universalköpfe mit Werkzeugaufnahme BT50 und HSK 63 beite Automatisch schwenkbar ...

CNC Portalfräsmaschine Waldrich Coburg Modell 14-10 FPF 125 nuer Schaltschrank neue Antriebe und Steuerung. Umfangreiche Überholung zwei neue Späneförderer. Maschine in sehr gutem Zustand aus dem ...

[TABELLE]
Zustand[NEUESPALTE]gebraucht
[NEUEZEILE]Lagernummer[NEUESPALTE]1072-20437
[NEUEZEILE]Maschinenart[NEUESPALTE]Bettfräsmaschinen

x-travel 300 mm
y-travel 200 mm
z-travel 350 mm
table surface area 700 x 270 mm
taper in main spindle ISO 40
turning speeds 8: 150 - 1660 U/min
turning speed range ...

x-travel 10000 mm
y-travel 1100 mm
z-travel 1700 mm
Control Heidenhain
type TNC 155
Tool changer 30
table surface area 10000x1000 mm
chip conveyor

Technical data:
Working principle: HSC
Year of construction 2012
5 - Axis
Milling, drilling, thread cutting (thread cutting up to M16), sawing

CNC -Control: ...

Number of axles 5 St.
travel -x axis 13.000 mm
travel -y axis 4.500 mm
travel -z axis 1.000 mm
distance between columns 6.500 mm
c-axis 190 Gr.
turning speed range ...

Catalog No. : 7015
Type: 17-10 FP NC/5
Producer: Waldrich Coburg
Made in: 1985 GO 2011
Characteristic:
3D control system: Siemens Sinumerik 840
Length of ...