Metal processing machines -> Metal cutting machines

Used Machinery: Metal cutting machines

Search result – 869 Metal cutting machines found

Category: Metal cutting machines -> Plate shears
Fasti 527-10-4
Date built: 2004
Condition: Used
Fasti 527-10-4
Ad ID: M105192
33335 Gütersloh Germany
Max. Cutting length: 1040 mm
Max. Sheet thickness: 4 mm steel
Manual backstop up to 550 mm
Page stop and table extensions
Rear area is protected by protective fence with ...
€ 8.300,-
Send request
Category: Metal cutting machines -> Laser cutting machines
Trumpf Trumatic L 3050
Date built: Trumatic L 3050
Condition: Used
Trumpf Trumatic L 3050
Ad ID: M104991
Žitavského 496, 156 00 Praha
The machine is in good technical condition, under power, after agreement is possible to test it.

Details:
Max. Werkstücklänge: 3000 mm
Max. Werkstückbreite: 1500 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
RAS 54.30  -  Plate Shear
Date built: 1975
Condition: Very good
RAS 54.30 - Plate Shear
Ad ID: M105051
63165 Mühlheim am Main Germany
Machine type: Plate Shear
Manufacturer: RAS
Type/Model: 54.30
Year of construction: 1975
Machine condition: very good
Offer type: used machine
Price on request
Send request
Category: Metal cutting machines -> Laser cutting machines
CO2 laser AMADA LC 3015 F1 NT
Date built: 2009
Condition: Good
CO2 laser AMADA LC 3015 F1 NT
Ad ID: M105055
Brno Czech Republic
Catalog No. : 7433
Type: LC 3015 F1 NT
Producer: AMADA
Made in: 2009
Characteristic:
2018 GO: resonator and turbo
Control system: Fanuc AF4000i-B
Price on request
Send request
Category: Metal cutting machines -> Punching presses
Stanze: MUBEA
Condition: Used
Stanze: MUBEA
Ad ID: M104482
Wiesbaden Germany
Basisdaten:
Lagernummer: 27213a
Kategorie: Lochstanzen/Revolverstanzen
Fabrikat: MUBEA
Steuerungsart: konventionell
Lagerort: Wiesbaden
Ursprungsland: ...
Price on request
Send request
Category: Metal cutting machines -> Punching presses
Stanze: novoPress
Condition: Used
Stanze: novoPress
Ad ID: M104483
Wiesbaden Germany
Basisdaten:
Lagernummer: 21471
Kategorie: Lochstanzen/Revolverstanzen
Fabrikat: novoPress
Steuerungsart: konventionell
Lagerort: Wiesbaden
Ursprungsland: ...
Price on request
Send request
Category: Metal cutting machines -> Plasma cutting lines
Plasma-Schneidanlage: EP-SYSTEMS M 40.60
Condition: Used
Plasma-Schneidanlage: EP-SYSTEMS M 40.60
Ad ID: M104517
Wiesbaden Germany
Basisdaten:
Lagernummer: 26741
Kategorie: Plasma-Schneidanlagen
Fabrikat: EP-SYSTEMS
Typ: M 40.60
Steuerungsart: konventionell
Lagerort: Wiesbaden
Price on request
Send request
Category: Metal cutting machines -> Plasma cutting lines
Plasma-Schneidanlage: MESSER GRIESHEIM PC-Plasmette
Condition: Used
Plasma-Schneidanlage: MESSER GRIESHEIM PC-Plasmette
Ad ID: M104518
Wiesbaden Germany
Basisdaten:
Lagernummer: 27119
Kategorie: Plasma-Schneidanlagen
Fabrikat: MESSER GRIESHEIM
Typ: PC-Plasmette
Steuerungsart: konventionell
Lagerort: Wiesbaden
Price on request
Send request
Category: Metal cutting machines -> Plasma cutting lines
Plasma-Schneidanlage: SCHWEISSTECHNIK MAINZ EX 60
Date built: 1990
Condition: Used
Plasma-Schneidanlage: SCHWEISSTECHNIK MAINZ EX 60
Ad ID: M104519
Wiesbaden Germany
Basisdaten:
Lagernummer: 21482
Kategorie: Plasma-Schneidanlagen
Fabrikat: SCHWEISSTECHNIK MAINZ
Typ: EX 60
Baujahr: 1990
Steuerungsart: konventionell
Price on request
Send request
Category: Metal cutting machines -> Plasma cutting lines
Plasma-Schneidanlage: THERMAL ARC PAK 45
Date built: 1985
Condition: Used
Plasma-Schneidanlage: THERMAL ARC PAK 45
Ad ID: M104520
Wiesbaden Germany
Basisdaten:
Lagernummer: 19417
Kategorie: Plasma-Schneidanlagen
Fabrikat: THERMAL ARC
Typ: PAK 45
Baujahr: 1985
Steuerungsart: konventionell
Lagerort: ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic HACO HSLX 3000x6
Date built: 1994
Condition: Used
Plate Shear - Hydraulic HACO HSLX 3000x6
Ad ID: M104647
ab Standort Germany
sheet width 3050 mm
plate thickness 6,00 mm
distance between columns mm
cutting angle 0,5 - 3,0 °
drive motor 11 kW
down holder 18 Stück
total power requirement ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic STROJAREN PIESOK NTE 3150/6,3
Date built: 1980
Condition: Used
Plate Shear - Hydraulic STROJAREN PIESOK NTE 3150/6,3
Ad ID: M104648
ab Standort Germany
sheet width 3150 mm
plate thickness 6,30 mm
distance between columns mm
total power requirement kW
weight of the machine ca. 8,90 t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Iron workers
Section Shear - Combined Geka HYD55
Date built: 2000
Condition: Used
Section Shear - Combined Geka HYD55
Ad ID: M104660
Lemmer, NL Germany
Punching capacity 55 Ton
Punching capacity round 40 in 10 mm
Throat 250 mm
round bar steel 40 mm
square edge steel 300 x 15 mm
L-beam 120 x 120 x 10 mm
total power ...
Price on request
Send request
Category: Metal cutting machines -> Laser cutting machines
Trumpf TRUMATIC L3030
Date built: TRUMATIC L3030
Condition: Used
Trumpf TRUMATIC L3030
Ad ID: M104369
Žitavského 496, 156 00 Praha
Machine in good technical condition, working, can be tested.

Details:
: 3000
: 1500
Max. Blechdicke: 15 mm
: 4000
: nein
: 88
Price on request
Send request
Category: Metal cutting machines -> Punching presses
Punching Press SIMASV AF 204/P (Ausklink-)
Date built: 1996
Condition: Used
Punching Press SIMASV AF 204/P (Ausklink-)
Ad ID: M104231
Abgeberwerk in der Nähe Germany
pressure - t
punching cross-cut in cmm -
stroke 20 mm
plate thickness 4 mm
blade length 205 mm
table-size 700 x 825 mm
cutting capacity stainless steel 3 mm
Price on request
Send request
Category: Metal cutting machines -> Punching presses
Mubea KLH 500
Condition: Used
Mubea KLH 500
Ad ID: M104237
33335 Gütersloh Germany
Punching force: 500 kN
Loading: 610 mm
Locht e.g. a 30 mm hole in 15 mm steel
Lift release via foot switch
Support table with stop
Assortment of tools is included in ...
€ 8.200,-
Send request
Category: Metal cutting machines -> Plate shears
SCHARRINGHAUSEN HS-III  -  Plate Shear
Date built: 1964
Condition: Good
SCHARRINGHAUSEN HS-III - Plate Shear
Ad ID: M104217
63165 Mühlheim am Main Germany
Machine type: Plate Shear
Manufacturer: SCHARRINGHAUSEN
Type/Model: HS-III
Year of construction: 1964
Machine condition: good
Offer type: used machine
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Hydr. Tafelschere, Schwingschnitt-Tafelblechschere, Blechtafelschere - WEINBRENNER TS 6 / 3050
Date built: 1972
Condition: Used
Hydr. Tafelschere, Schwingschnitt-Tafelblechschere, Blechtafelschere - WEINBRENNER TS 6 / 3050
Ad ID: M104185
Germany
Hydr. Tafelschere WEINBRENNER Typ TS 6 / 3050
Masch. Nr. 419 T Baujahr 1972
Schnittlänge 3050 mm
Schnittstärke 6 mm
Schnittwinkel 1°15`
Hinteranschlag 1000 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical RAS 83.20
Condition: Used
Plate Shear - Mechanical RAS 83.20
Ad ID: M104160
Ahaus Germany
sheet width 2040 mm
plate thickness 3.0 mm
thickness at "Niro-steel" 1.5 mm
no. of strokes 50 Hub/min
cutting angle 1.4 Grad
table height 750 mm
distance between ...
Price on request
Send request
Category: Metal cutting machines -> Iron workers
Section Steel Shear GEKA HYDRACROP 55 SD
Date built: 2007
Condition: Used
Section Steel Shear GEKA HYDRACROP 55 SD
Ad ID: M104161
Ahaus Germany
puncher 55.0 t
round bar steel 40.0 mm
square edge steel 40.0 x 40.0 mm
L-beam 120 x 120 x 10 mm
hole punching press: capacity (dia. x thick.) Ø 40.0 x 10.0 mm
shear: ...
Price on request
Send request
Category: Metal cutting machines -> Cooping machines
Notching Machine SIMASV AF 204/P (Lochstanz-)
Date built: 1996
Condition: Used
Notching Machine SIMASV AF 204/P (Lochstanz-)
Ad ID: M104164
Abgeberwerk in der Nähe Germany
plate thickness 4 mm
blade length 205 mm
table-size 700 x 825 mm
cutting capacity stainless steel 3 mm
throat 300 mm
strokes 50 p. min.
oil tank 35 l
total ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic OMAG ES 36
Date built: 1996
Condition: Used
Plate Shear - Hydraulic OMAG ES 36
Ad ID: M104076
Abgeberwerk in der Nähe Germany
sheet width 3050 mm
plate thickness 6 mm
distance between columns 3200 mm
cutting angle adjustment 30´- 2"30´ °
strokes 25-8 p. min.
back stop way ca. 600 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical RAS 82.25
Condition: Used
Plate Shear - Mechanical RAS 82.25
Ad ID: M102690
Bünde bei Bielefeld Germany
sheet width 2540 mm
plate thickness 2 mm
strokes per minute until 63
throat 100 mm
cutting angle 1,13 °
table height 750 mm
table width 320 mm
table height ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical SCHECHTL SMT 250
Date built: 1975
Condition: Used
Plate Shear - Mechanical SCHECHTL SMT 250
Ad ID: M102635
ab Standort Germany
sheet width 2500 mm
plate thickness 1,75 mm
distance between columns mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Shechtl SMT 250
Condition: Used
Shechtl SMT 250
Ad ID: M102529
33335 Gütersloh Germany
Max. Cutting length: 2500 mm
Max. Sheet thickness: 1.75 mm steel
Manual backstop up to 500 mm
Page stop and table extension
Knife sharpened
€ 10.700,-
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical CIDAN MS M 10/3,0
Condition: Used
Plate Shear - Mechanical CIDAN MS M 10/3,0
Ad ID: M102500
Ahaus Germany
sheet width 1050 mm
plate thickness 3.0 mm
thickness at "Niro-steel" 1.5 mm
no. of strokes 35 Hub/min
cutting angle 2°30 °
engine output 3.0 kW
table height 810 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical GERVER GG.4P.
Date built: 1983
Condition: Used
Plate Shear - Mechanical GERVER GG.4P.
Ad ID: M102501
Ahaus Germany
sheet width 605 mm
plate thickness 1.50 mm
distance between columns 605 mm
back stop - adjustable 300 mm
table width 605 mm
operating pressure max 6.0 bar
work ...
Price on request
Send request
Category: Metal cutting machines -> Water jet cutting systems
Water cutting machine MicroStep AquaCut 3001.20WB
Date built: 2016
Condition: Good
Water cutting machine MicroStep AquaCut 3001.20WB
Ad ID: M102393
Brno Czech Republic
Catalog No. : 7383
Type: AquaCut 3001.20WB
Producer: MicroStep
Made in: 2016
Characteristic:
Control system: iMSNC
Total hours: 35712 h
Hours on: ...
Price on request
Send request
Category: Metal cutting machines -> Laser cutting machines
Microstep Microlas 3001.15
Date built: Microlas 3001.15
Condition: Used
Microstep Microlas 3001.15
Ad ID: M102315
Žitavského 496, 156 00 Praha
The machine is in good technical condition, movements can be tested, cutting is not possible due to the lack of cutting gas. MSNC 500 L control software.

Details:
Max. ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic SAFAN VS 430-6
Date built: 1987
Condition: Used
Plate Shear - Hydraulic SAFAN VS 430-6
Ad ID: M102318
ab Standort Germany
sheet width 4300 mm
plate thickness 6,00 mm
distance between columns mm
rear stop max. 1000 mm
cutting angle min. 0,5/max. 1,5 °
quantity of oil 210 l
total ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Shears for profiled steel GEKA Hydracrop 70- SD
Date built: 1993
Condition: Good
Shears for profiled steel GEKA Hydracrop 70- SD
Ad ID: M102295
Brno Czech Republic
Catalog No. : 7366
Type: Hydracrop 70- SD
Producer: GEKA
Made in: 1993
Characteristic:
Power input: 9 kW
Punch neck: 500 mm
Weight: 2400 kg
Price on request
Send request
Category: Metal cutting machines -> Water jet cutting systems
Water cutting machine Flow WMC2-4030
Date built: 2007
Condition: Good
Water cutting machine Flow WMC2-4030
Ad ID: M102298
Brno Czech Republic
Catalog No. : 7371
Type: WMC2-4030
Producer: Flow
Made in: 2007
Characteristic:
Hours on: 21000 h
Length of the working table: 4000 mm
Width of the ...
Price on request
Send request
Category: Metal cutting machines -> Punching presses
Punching Press PEDDINGHAUS HYDRAULIC 1250
Condition: Used
Punching Press PEDDINGHAUS HYDRAULIC 1250
Ad ID: M102223
Ahaus Germany
pressure 125 t
punching cross-cut in cmm Ø 39 in 24 mm
stroke 10 - 50 mm
column arm 510 mm
work height max. 1100 mm
no. of strokes 29 Hub/min
punch diameter max. ...
Price on request
Send request
Category: Metal cutting machines -> Cooping machines
Notching Machine HESSE by LFSS HNM-6 V
Condition: New and unused
Notching Machine HESSE by LFSS HNM-6 V
Ad ID: M102224
Germany
neu
ca. 8 Wochen ab Auftragse
Türkei
18900 €
387.45 €
200 mm
4 - 6 mm
2 - 3 mm
30 1/min
30 - 140 °
4 kW
900 mm
Price on request
Send request
Category: Metal cutting machines -> Cooping machines
Notching Machine HESSE by LFSS HNM-6 F
Condition: New and unused
Notching Machine HESSE by LFSS HNM-6 F
Ad ID: M102225
Germany
neu
ca. 8 Wochen ab Auftragse
Türkei
9500 €
196.65 €
250 mm
6 mm
3 mm
25 1/min
90 °
4 kW
950 mm
780 mm
Price on request
Send request
Category: Metal cutting machines -> Plasma cutting lines
CNC Plasma Cutter PlasmaCut 3015 - PMX 105 Sync
Date built: 2024
Condition: New and unused
CNC Plasma Cutter PlasmaCut 3015 - PMX 105 Sync
Ad ID: M102226
Germany
neu
2024
2517
Juni 2024, Zwischenverkau
Deutschland
36950 €
750.09 €
1500x3000 mm
Hypertherm Powermax 105 S
22 mm
22 ...
Price on request
Send request
Category: Metal cutting machines -> Laser cutting machines
Laser Cutting Machine HESSE by DURMA HD-TC Compact 60170 - 2 kW
Condition: New and unused
Laser Cutting Machine HESSE by DURMA HD-TC Compact 60170 - 2 kW
Ad ID: M102227
Germany
neu
ca. 12 Wochen ab Auftrags
Türkei
256380 €
2 kW
-
8 mm
4 mm
6 mm
2 mm
4 mm
170 mm
20 (optional 12) mm
Price on request
Send request
Category: Metal cutting machines -> Punching presses
Punching Press GABRO PAC 750
Date built: unbekannt
Condition: Used
Punching Press GABRO PAC 750
Ad ID: M102166
D - 77815 Bühl Germany
throat 750 mm
punch diameter max. 75 mm
max. sheet metal thickness 4 mm
weight of the machine ca. 250 kg
dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m
throat 750 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical FASTI 506-10-2,5
Date built: 1991
Condition: Used
Plate Shear - Mechanical FASTI 506-10-2,5
Ad ID: M102168
ab Standort Germany
sheet width 1030 mm
plate thickness 2,50 mm
distance between columns mm
total power requirement kW
weight of the machine ca. 0,80 t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Cooping machines
Notching Machine INDUMASCH VA-4
Date built: 1993
Condition: Used
Notching Machine INDUMASCH VA-4
Ad ID: M102123
Bünde bei Bielefeld Germany
plate thickness 4 mm
blade length 200 mm
table surface area 1000 x 780 mm
angle adjustable from - to 30 - 140 Grad
work height max. 910 mm
thickness at "Niro-steel" 3 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Fasti 506-10-2, 5
Date built: 1991
Condition: Used
Fasti 506-10-2, 5
Ad ID: M102130
33335 Gütersloh Germany
Max. Cutting length: 1030 mm
Max. Sheet thickness: 2,5 mm steel
Manually adjustable backstop up to 530 mm
Cutting angle adjustment
Page stop and table extension
€ 6.200,-
Send request
Category: Metal cutting machines -> Iron workers
Section Steel Shear  WMW ScFDLA 13
Condition: Used
Section Steel Shear WMW ScFDLA 13
Ad ID: M101982
Gera Germany


Details:
round bar steel: 36 mm
square edge steel: 30 mm
L-beam: 100x10 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Hebeltafelschere: FASTI 504-3
Date built: 1978
Condition: Used
Hebeltafelschere: FASTI 504-3
Ad ID: M101996
Wiesbaden Germany
Basisdaten:
Lagernummer: 27330
Kategorie: Hebeltafelscheren
Fabrikat: FASTI
Typ: 504-3
Baujahr: 1978
Steuerungsart: konventionell
Lagerort: Wiesbaden
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Stroje a zariadenia Piesok s.r.o. NTE 2500/4 B
Condition: Used
Stroje a zariadenia Piesok s.r.o. NTE 2500/4 B
Ad ID: M102001
Žitavského 496, 156 00 Praha
good technical condition, under power

Details:
Max. Schnittlänge: 2500 mm
Max. Blechdicke: 4 mm
Maschinengewicht: 5800 kg
Maschinenabmessungen L x B x H: 2920 x ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0
Date built: 2009
Condition: Used
Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0
Ad ID: M102005
ab Standort Germany
sheet width 1530 mm
plate thickness 2,00 mm
distance between columns mm
total power requirement kW
weight of the machine ca. 0,840 t
dimensions of the machine ca. 1,90 ...
Price on request
Send request
Category: Metal cutting machines -> Laser cutting machines
Fiber laser SENFENG SF3015H
Date built: 2021
Condition: Good
Fiber laser SENFENG SF3015H
Ad ID: M102012
Brno Czech Republic
Catalog No. : 7354
Type: SF3015H
Producer: SENFENG
Made in: 2021
Characteristic:
Sheet dimensions: 1530x3050 mm
Laser power: 6 kW
Length of the ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Tafelschere, Blechtafelschere, Tafel-Blechschere - FASTI 506-10-2,5
Date built: 1996
Condition: Used
Tafelschere, Blechtafelschere, Tafel-Blechschere - FASTI 506-10-2,5
Ad ID: M101887
Germany
Tafelschere, Blechtafelschere FASTI Typ 506-10-2,5
Masch. Nr. 96-506-018 Baujahr 1996
Schnittlänge 1030 mm
Schnittstärke 2,5 mm
Arbeitshöhe 850 mm
Antriebsleistung 4 ...
€ 4.500,-
Send request
Category: Metal cutting machines -> Laser cutting machines
Bystronic ByVention 3015
Date built: ByVention 3015
Condition: Used
Bystronic ByVention 3015
Ad ID: M101867
Žitavského 496, 156 00 Praha
The machine is in good technical condition, can be tested, regularly serviced.

Details:
Max. Werkstücklänge: 1500 mm
Max. Werkstückbreite: 750 mm
Max. Blechdicke: ...
Price on request
Send request
Category: Metal cutting machines -> Laser cutting machines
Bystronic ByVention 3015
Date built: ByVention 3015
Condition: Used
Bystronic ByVention 3015
Ad ID: M101868
Žitavského 496, 156 00 Praha
The machine is in good technical condition, can be tested, regularly serviced.

Details:
Max. Werkstücklänge: 1500 mm
Max. Werkstückbreite: 750 mm
Max. Blechdicke: ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical FASTI 507-25-3.25
Condition: Used
Plate Shear - Mechanical FASTI 507-25-3.25
Ad ID: M101870
Ahaus Germany
sheet width 2540 mm
plate thickness 3.25 mm
throat 100 mm
no. of strokes 60.0 Hub/min
back stop - adjustable 530 mm
voltage 400 V
engine output 7.5 kW
weight ...
Price on request
Send request
tramao-Logo

Sell used Metal cutting machines

Get details!
Sell your metal processing machines, machine tools, printing machines, construction machines, wood processing machines on tramao.com.

You are in the "Metal cutting machines" category. This category belongs to the main category of Metal processing machines. The main category of Metal processing machines also includes other new and used machines that may be of interest to you. Check our extensive range!

The range includes machines such as Accessories, Casting machines, Cleaning devices, Drilling machines, Eroding machines, Fine tuning machines, Forging machines, Gear cutting machines, Grinding machines, Hardening machines, Machining centers, Metal connecting machines, Metal cutting machines, Metal forming machines, Milling machines, millers, Miscellaneous, Presses, Sawing machines, Shaping machines & Broaching machines & Drawing machines, Sheet- and Coil-processing lines, Thread production machines, Turning machines, lathes, Wire processing machines etc.! In addition to the categorized machines, tramao's range also includes new and used forklifts, cranes and means of transport.

There is also the option to search for spare parts, tools and the associated service companies.

CO