Used Machinery: Textile machines

There are 8 sewing machines in good condition available. 3x identical 767-FAS-373. 2x identical 467-65-FA-573. 1x 867-190142. 1x 524l-847-75. 1x S524-847-750. All sewing machines including safety ...

A WUMAG TEXROLL cylinder dryer for drying and stretching. Drums: 6 pieces, drum diameter: 560mm, TÜV-tested. Roller width: 3000mm, fabric width: 2800mm. Heating: Steam-heated. Including: Tidland ...

Drums: 3 pieces, top and bottom 2 pieces, with felt covering, center steel roller heated. Roller width: 3150mm, fabric width: 2890mm, heating: steam-heated, accessories: 2 spare rollers not ...

Almost unused single needle lockstitch flatbed sewing machine. With needle positioning, XXL vertical hook, foot lift, frame and table top. max. stitch length: 12mm, output: 3400 stitches/min. ...

Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible.

Ref.Nr.: ...

Leveler with spectrograph analysis, including documentation.

Ref.Nr.: INNO4733

Throughput rate: 2500-3000 pieces/h, including spare parts package, raw material can be supplied: approx. 3t of each of the 3 types of fleece, 1.5t of wire and 700kg of ear tape, an inspection on site ...

Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, ...

Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible.

Ref.Nr.: INNO26083

The StyleShoots Horizontal, designed for flatlay product photography, contains a Canon EOS 5D Mark III with a Canon EF 24-105mm f/4L IS USM lens. Length: 2820mm, width: 2160mm, height: 2600mm, very ...

Control: USK-sensocon, an on-site inspection is possible.

Ref.Nr.: INNO26012

There are two identical fabric inspection machines available, working width: 1900mm.

Ref.Nr.: INNO25973

Working width: 1900mm, with center winder, drive, accumulator, fettling box, fettling & shearing machine Vollenweider, inspection Uster and destacker, the inspection Uster was renewed in 2021.

Working width: 3200mm, with circumferential unwinding, fettling box, accumulator, inspection table, fettling box and circumferential rewinding.

Ref.Nr.: INNO25969

There are five industrial sewing machines Dohle available (1) Dohle 751-914, year of manufacture: 1991 (2) Dohle RAPID-H, year of manufacture: 2000 (3) Dohle 621-904, year of manufacture: 1989 (4) ...

Working width: 3500mm, with circumferential unwinding, fettling box, accumulator, inspection table, ultrasonic cutting unit, fettling box and circumferential rewinding.

Ref.Nr.: INNO25967

Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery ...

Working width: 2000mm, max. roll diameter: 800mm, length: 2700mm, width: 1250mm, height: 2050mm, weight: 250kg, with documentation, light table for transmitted light, light from above, winding and ...

Number of winding positions: 840, an on-site inspection is possible.

Ref.Nr.: INNO25846

Load: 300-1500kg, weight: 1.43t, an inspection is possible.

Ref.Nr.: INNO25831

Machine type:
Antique Industrial Sewing Machine,
Leather Sewing Machine,
Free Arm Sewing Machine
Manufacturer: SINGER
Type/Model: 29K62
Year of construction: ...

Fixing width: 250mm, heating output: 8kW, temperature: 0-250°C, speed: 0-12m/min, with documentation.

Ref.Nr.: INNO25559

Without documentation, accessories or spare parts, the machine is defective ist defekt.

Ref.Nr.: INNO25460

Working width: 4000mm, with 3 warp beams, 6 sectional warp beams, 20 shafts 13 inch, dobby machine 2881/2 and batch winder Neuenhauser, operational hours counter: 10,613h.

Ref.Nr.: ...

Capacity: 60-80kg.

Ref.Nr.: INNO25329

Woller width: 2500mm, product width: 2200mm, with fabric centering, spare scraper sets (24 rollers) and other spare parts, a second machine is available as a source of spare parts.

Roller width: 2400mm, product width: 2200mm.

Ref.Nr.: INNO25326

Connected load: 1.5kW.

Ref.Nr.: INNO25325

A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: ...

Capacity: 19l, operating temperature: 0-140°C, working overpressure: 6bar, controls: SEDOMAT 5500, with documentation, the machine was hardly used.

Ref.Nr.: INNO24580

Rotational speed: 900/min, connected load: 2.7kVA, weight: 3.98t, with documentation.

Ref.Nr.: INNO24556

There are 22 machines available, 4x Singer 770 D41PE, 2x Singer 990 E3, 1x Singer 993 E3 FA320, 1x Singer 460 K73, 1x Union Spezial Klasse 75300 A, 1x Rimoldi 446930, 1x Romoldi 416498, 1x Rimoldi ...

There are fifteen identical machines available, number of winding positions: 196, length: 23,900mm, width: 1100mm, height: 2100mm, two machines are equipped with an inverter.

Ref.Nr.: ...

There are three identical machines available, number of winding positions: 180m, length: 23,900mm, width: 1100mm, height: 2100mm.

Ref.Nr.: INNO23530

Seam width: 28mm, with integrated cutting device, knife diameter: 100mm.

Ref.Nr.: INNO23397

Output: 720 pair/h, number of forms: 10, connected load: 13kW, length: 1934mm, width: 1737mm, height: 1910mm, operational hours counter: ca. 100h, including documentation and 20 forms.

Roll width: 2600mm, controls: SIEMENS SIMATIC HMI, machine was overhauled in 2015.

Ref.Nr.: INNO23207

Needle distance: 14mm, number of needles: 2.

Ref.Nr.: INNO22827

Needle system: 134-35 LR, needle size: 110-150Nm, max. sewing speed: 2800/min, max. stitch length: 8mm, stitch type: 301 (Lockstitch), max. clearance under the sewing foot: 14mm, clear workspace: ...

Working width: 90inch, yarn count E: 10.

Ref.Nr.: INNO22171

Working width: 2300mm, yarn count E: 8.

Ref.Nr.: INNO22170

Yarn count: 10, nominal width: 90inch.

Ref.Nr.: INNO22169

Technical details on demand.

Ref.Nr.: INNO22168

Nominal width: 2500mm/ 96inch, yarn count E: 10.

Ref.Nr.: INNO22167

Working width: 2290mm.

Ref.Nr.: INNO22166

Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007.

Ref.Nr.: INNO20950

Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.

Ref.Nr.: INNO20893

Width: 2050mm, needles: 8.

Ref.Nr.: INNO6368

Band width: 400mm, length: 2350mm, machine needs overhauling.

Ref.Nr.: INNO18860

There are two identical machines available, working width: 3200mm.

Ref.Nr.: INNO9831