Metal processing machines -> Metal cutting machines -> Plate shears

Used Machinery: Plate shears

Search result – 265 Plate shears found

Category: Metal cutting machines -> Plate shears
Fasti 527-10-4
Date built: 2004
Condition: Used
Fasti 527-10-4
Ad ID: M105192
33335 Gütersloh Germany
Max. Cutting length: 1040 mm
Max. Sheet thickness: 4 mm steel
Manual backstop up to 550 mm
Page stop and table extensions
Rear area is protected by protective fence with ...
€ 8.300,-
Send request
Category: Metal cutting machines -> Plate shears
RAS 54.30  -  Plate Shear
Date built: 1975
Condition: Very good
RAS 54.30 - Plate Shear
Ad ID: M105051
63165 Mühlheim am Main Germany
Machine type: Plate Shear
Manufacturer: RAS
Type/Model: 54.30
Year of construction: 1975
Machine condition: very good
Offer type: used machine
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic HACO HSLX 3000x6
Date built: 1994
Condition: Used
Plate Shear - Hydraulic HACO HSLX 3000x6
Ad ID: M104647
ab Standort Germany
sheet width 3050 mm
plate thickness 6,00 mm
distance between columns mm
cutting angle 0,5 - 3,0 °
drive motor 11 kW
down holder 18 Stück
total power requirement ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic STROJAREN PIESOK NTE 3150/6,3
Date built: 1980
Condition: Used
Plate Shear - Hydraulic STROJAREN PIESOK NTE 3150/6,3
Ad ID: M104648
ab Standort Germany
sheet width 3150 mm
plate thickness 6,30 mm
distance between columns mm
total power requirement kW
weight of the machine ca. 8,90 t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Plate shears
SCHARRINGHAUSEN HS-III  -  Plate Shear
Date built: 1964
Condition: Good
SCHARRINGHAUSEN HS-III - Plate Shear
Ad ID: M104217
63165 Mühlheim am Main Germany
Machine type: Plate Shear
Manufacturer: SCHARRINGHAUSEN
Type/Model: HS-III
Year of construction: 1964
Machine condition: good
Offer type: used machine
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Hydr. Tafelschere, Schwingschnitt-Tafelblechschere, Blechtafelschere - WEINBRENNER TS 6 / 3050
Date built: 1972
Condition: Used
Hydr. Tafelschere, Schwingschnitt-Tafelblechschere, Blechtafelschere - WEINBRENNER TS 6 / 3050
Ad ID: M104185
Germany
Hydr. Tafelschere WEINBRENNER Typ TS 6 / 3050
Masch. Nr. 419 T Baujahr 1972
Schnittlänge 3050 mm
Schnittstärke 6 mm
Schnittwinkel 1°15`
Hinteranschlag 1000 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical RAS 83.20
Condition: Used
Plate Shear - Mechanical RAS 83.20
Ad ID: M104160
Ahaus Germany
sheet width 2040 mm
plate thickness 3.0 mm
thickness at "Niro-steel" 1.5 mm
no. of strokes 50 Hub/min
cutting angle 1.4 Grad
table height 750 mm
distance between ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic OMAG ES 36
Date built: 1996
Condition: Used
Plate Shear - Hydraulic OMAG ES 36
Ad ID: M104076
Abgeberwerk in der Nähe Germany
sheet width 3050 mm
plate thickness 6 mm
distance between columns 3200 mm
cutting angle adjustment 30´- 2"30´ °
strokes 25-8 p. min.
back stop way ca. 600 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical RAS 82.25
Condition: Used
Plate Shear - Mechanical RAS 82.25
Ad ID: M102690
Bünde bei Bielefeld Germany
sheet width 2540 mm
plate thickness 2 mm
strokes per minute until 63
throat 100 mm
cutting angle 1,13 °
table height 750 mm
table width 320 mm
table height ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical SCHECHTL SMT 250
Date built: 1975
Condition: Used
Plate Shear - Mechanical SCHECHTL SMT 250
Ad ID: M102635
ab Standort Germany
sheet width 2500 mm
plate thickness 1,75 mm
distance between columns mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Shechtl SMT 250
Condition: Used
Shechtl SMT 250
Ad ID: M102529
33335 Gütersloh Germany
Max. Cutting length: 2500 mm
Max. Sheet thickness: 1.75 mm steel
Manual backstop up to 500 mm
Page stop and table extension
Knife sharpened
€ 10.700,-
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical CIDAN MS M 10/3,0
Condition: Used
Plate Shear - Mechanical CIDAN MS M 10/3,0
Ad ID: M102500
Ahaus Germany
sheet width 1050 mm
plate thickness 3.0 mm
thickness at "Niro-steel" 1.5 mm
no. of strokes 35 Hub/min
cutting angle 2°30 °
engine output 3.0 kW
table height 810 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical GERVER GG.4P.
Date built: 1983
Condition: Used
Plate Shear - Mechanical GERVER GG.4P.
Ad ID: M102501
Ahaus Germany
sheet width 605 mm
plate thickness 1.50 mm
distance between columns 605 mm
back stop - adjustable 300 mm
table width 605 mm
operating pressure max 6.0 bar
work ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic SAFAN VS 430-6
Date built: 1987
Condition: Used
Plate Shear - Hydraulic SAFAN VS 430-6
Ad ID: M102318
ab Standort Germany
sheet width 4300 mm
plate thickness 6,00 mm
distance between columns mm
rear stop max. 1000 mm
cutting angle min. 0,5/max. 1,5 °
quantity of oil 210 l
total ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Shears for profiled steel GEKA Hydracrop 70- SD
Date built: 1993
Condition: Good
Shears for profiled steel GEKA Hydracrop 70- SD
Ad ID: M102295
Brno Czech Republic
Catalog No. : 7366
Type: Hydracrop 70- SD
Producer: GEKA
Made in: 1993
Characteristic:
Power input: 9 kW
Punch neck: 500 mm
Weight: 2400 kg
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical FASTI 506-10-2,5
Date built: 1991
Condition: Used
Plate Shear - Mechanical FASTI 506-10-2,5
Ad ID: M102168
ab Standort Germany
sheet width 1030 mm
plate thickness 2,50 mm
distance between columns mm
total power requirement kW
weight of the machine ca. 0,80 t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Fasti 506-10-2, 5
Date built: 1991
Condition: Used
Fasti 506-10-2, 5
Ad ID: M102130
33335 Gütersloh Germany
Max. Cutting length: 1030 mm
Max. Sheet thickness: 2,5 mm steel
Manually adjustable backstop up to 530 mm
Cutting angle adjustment
Page stop and table extension
€ 6.200,-
Send request
Category: Metal cutting machines -> Plate shears
Hebeltafelschere: FASTI 504-3
Date built: 1978
Condition: Used
Hebeltafelschere: FASTI 504-3
Ad ID: M101996
Wiesbaden Germany
Basisdaten:
Lagernummer: 27330
Kategorie: Hebeltafelscheren
Fabrikat: FASTI
Typ: 504-3
Baujahr: 1978
Steuerungsart: konventionell
Lagerort: Wiesbaden
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Stroje a zariadenia Piesok s.r.o. NTE 2500/4 B
Condition: Used
Stroje a zariadenia Piesok s.r.o. NTE 2500/4 B
Ad ID: M102001
Žitavského 496, 156 00 Praha
good technical condition, under power

Details:
Max. Schnittlänge: 2500 mm
Max. Blechdicke: 4 mm
Maschinengewicht: 5800 kg
Maschinenabmessungen L x B x H: 2920 x ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0
Date built: 2009
Condition: Used
Plate Shear - Mechanical SCHRÖDER MHSU 1500/2,0
Ad ID: M102005
ab Standort Germany
sheet width 1530 mm
plate thickness 2,00 mm
distance between columns mm
total power requirement kW
weight of the machine ca. 0,840 t
dimensions of the machine ca. 1,90 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Tafelschere, Blechtafelschere, Tafel-Blechschere - FASTI 506-10-2,5
Date built: 1996
Condition: Used
Tafelschere, Blechtafelschere, Tafel-Blechschere - FASTI 506-10-2,5
Ad ID: M101887
Germany
Tafelschere, Blechtafelschere FASTI Typ 506-10-2,5
Masch. Nr. 96-506-018 Baujahr 1996
Schnittlänge 1030 mm
Schnittstärke 2,5 mm
Arbeitshöhe 850 mm
Antriebsleistung 4 ...
€ 4.500,-
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical FASTI 507-25-3.25
Condition: Used
Plate Shear - Mechanical FASTI 507-25-3.25
Ad ID: M101870
Ahaus Germany
sheet width 2540 mm
plate thickness 3.25 mm
throat 100 mm
no. of strokes 60.0 Hub/min
back stop - adjustable 530 mm
voltage 400 V
engine output 7.5 kW
weight ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic KNUTH KHT 3206 C
Date built: 2004
Condition: Used
Plate Shear - Hydraulic KNUTH KHT 3206 C
Ad ID: M101871
Ahaus Germany
sheet width 3200 mm
plate thickness 0.5 - 6.0 mm
cutting angle 1° 30 °
no. of strokes 14 Hub/min
back stop - adjustable max. 1000 mm
down holder 13 Stück
work ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic ATLANTIC ATS 3000
Date built: 1993
Condition: Used
Plate Shear - Hydraulic ATLANTIC ATS 3000
Ad ID: M101872
Ahaus Germany
sheet width 3050 mm
plate thickness 6,0 mm
cutting angle 0,5 - 3,0 °
down holder 18 Stück
no. of strokes 9 / 14 Hub/min
back stop - adjustable max. 750 mm
Control ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic HACO TS 3006
Date built: 2024
Condition: New and unused
Plate Shear - Hydraulic HACO TS 3006
Ad ID: M101752
Witten / Germany Germany
3050 mm
06,0 mm
-
0,5-3,0 °
1000 mm
3050 mm
06,0 mm
-
0,5-3,0 °
1000 mm
3050 mm
06,0 mm
-
0,5-3,0 °
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic HACO TSX 3012
Date built: 2024
Condition: New and unused
Plate Shear - Hydraulic HACO TSX 3012
Ad ID: M101719
Witten / Germany Germany
3050 mm
12,0 mm
-
0,5-3,0 °
1000 mm
3050 mm
12,0 mm
-
0,5-3,0 °
1000 mm
3050 mm
12,0 mm
-
0,5-3,0 °
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic ATLANTIC XTS 3000
Date built: 1992
Condition: Used
Plate Shear - Hydraulic ATLANTIC XTS 3000
Ad ID: M101587
Ahaus Germany
sheet width 3050 mm
plate thickness 6.0 mm
cutting angle 0.5 - 3.0 °
down holder 18 Stück
no. of strokes 9 / 14 Hub/min
back stop - adjustable 750 mm
Control SC7p ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic DURMA SB 3006 NT HH
Date built: 2008
Condition: Used
Plate Shear - Hydraulic DURMA SB 3006 NT HH
Ad ID: M101588
Ahaus Germany
sheet width 3100 mm
plate thickness 6.0 mm
thickness at "Niro-steel" 4.0 mm
distance between columns 3120 mm
down holder 16 Stück
oil volume 200 ltr.
cutting angle ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical RAS 82.10
Condition: Used
Plate Shear - Mechanical RAS 82.10
Ad ID: M101539
ab Standort Germany
sheet width 1040 mm
plate thickness 2,50 mm
distance between columns mm
total power requirement kW
weight of the machine ca. 0,750 t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Plate shears
RAS 82.10
Condition: Used
RAS 82.10
Ad ID: M101505
33335 Gütersloh Germany
Max. Cutting length: 1040 mm
Max. Sheet thickness: 2,5 mm steel
Manual backstop from the front can be operated up to 500 mm
Page Stop
Knife sharpened
Weight: 750 kg
€ 5.700,-
Send request
Category: Metal cutting machines -> Plate shears
Stahl SK 2/1 Tafelschere
Date built: 1962
Condition: Used
Stahl SK 2/1 Tafelschere
Ad ID: M101352
87719 Mindelheim Germany
Arbeitslänge: 1020 mm
Blechleistung max.: 3,5 mm
Abmessungen (BxTxH), ca.: 1640 x 1860 x 1390 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic BAYKAL HGL 3006
Date built: 2005
Condition: Used
Plate Shear - Hydraulic BAYKAL HGL 3006
Ad ID: M101254
Ahaus Germany
sheet width 3060 mm
plate thickness 6.0 mm
thickness at "Niro-steel" 4.0 mm
distance between columns 3100 mm
down holder 16 Stück
no. of strokes 20 Hub/min
oil ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic DURMA / METALLKRAFT HTBS-T 3100-60
Date built: 2017
Condition: Used
Plate Shear - Hydraulic DURMA / METALLKRAFT HTBS-T 3100-60
Ad ID: M100996
Ahaus Germany
sheet width 3100 mm
plate thickness 6.0 mm
thickness at "Niro-steel" 4.0 mm
cutting angle 2,0 °
no. of strokes 15 Hub/min
back stop - adjustable max. 1000 mm
down ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Stroje a zariadenia Piesok s.r.o. CNTA 3150/25 A
Date built: CNTA 3150/25 A
Condition: Used
Stroje a zariadenia Piesok s.r.o. CNTA 3150/25 A
Ad ID: M100833
Žitavského 496, 156 00 Praha
The machine is in good technical condition, cannot be tested.

Details:
Max. Schnittlänge: 3150 mm
Max. Blechdicke: 25 mm
Antrieb einer Schere: Hydraulický
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic WIEGER DELTA 6/25
Date built: 1980
Condition: Used
Plate Shear - Hydraulic WIEGER DELTA 6/25
Ad ID: M100751
ab Standort Germany
sheet width 2550 mm
plate thickness 6,00 mm
distance between columns mm
down holder 14
total power requirement 15 kW
weight of the machine ca. ca. 5-6 t
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Wila VS 310-6
Condition: Used
Wila VS 310-6
Ad ID: M100439
33335 Gütersloh Germany
Max. Cutting length: 3100 mm
Max. Cutting thickness: 6 mm steel
Manual backstop adjustable from the front up to 1000 mm
Shear angle adjustment
Cut length limit
Knife ...
€ 13.300,-
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic BAYKAL HGL 2600/6
Date built: 1994
Condition: Used
Plate Shear - Hydraulic BAYKAL HGL 2600/6
Ad ID: M100236
Ahaus Germany
sheet width 2560 mm
plate thickness 6.0 mm
thickness at "Niro-steel" 4.0 mm
distance between columns 2600 mm
down holder 12 Stück
no. of strokes 20 Hub/min
oil ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical VOLZ EuroCut 3040
Date built: 2023
Condition: New and unused
Plate Shear - Mechanical VOLZ EuroCut 3040
Ad ID: M98326
Witten / Germany Germany
sheet width 3060 mm
plate thickness 04,0 mm
distance between columns mm
table width 455 mm
The data for this ad was created with ModulMWS - the software solution of LogoTech ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical VOLZ EuroCut 2040
Date built: 2023
Condition: New and unused
Plate Shear - Mechanical VOLZ EuroCut 2040
Ad ID: M98327
Witten / Germany Germany
sheet width 2060 mm
plate thickness 04,0 mm
distance between columns mm
table width 455 mm
The data for this ad was created with ModulMWS - the software solution of LogoTech ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic RABBA HS 16/1250
Date built: 1993
Condition: Used
Plate Shear - Hydraulic RABBA HS 16/1250
Ad ID: M97987
Ahaus Germany
sheet width 1250 mm
plate thickness 16.0 mm
thickness at "Niro-steel" 10,0 mm
blade length 1300 mm
cutting angle 2-3 Grad
no. of strokes 13 Hub/min
back stop - ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Mechanical ERBEND EMS 3220
Condition: New and unused
Plate Shear - Mechanical ERBEND EMS 3220
Ad ID: M97989
Germany
neu
ca. 12 Wochen ab Auftrags
Türkei
29200 €
592.76 €
3200 mm
2 mm
1.2 mm
3650 mm
1700 mm
1300 mm
NC gesteuerter ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic SAGITA-BEYELER 3100 x 4
Date built: 1973
Condition: Used
Plate Shear - Hydraulic SAGITA-BEYELER 3100 x 4
Ad ID: M97944
D - 77815 Bühl Germany
sheet width 3100 mm
plate thickness 4 mm
distance between columns 3170 mm
back stop - adjustable 650 mm
down holder 11 Stück
cutting angle 1,5 °
no. of strokes 30 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Durma Turkey VS 3010
Date built: VS 3010
Condition: Used
Durma Turkey VS 3010
Ad ID: M97909
Žitavského 496, 156 00 Praha
Machine in good condition, not under power yet, but can be connected prior inspection.

Details:
Steuerung Cybelec: DNC 60
Abkantlänge: 3 080 x 10 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic MVD HGM 3010
Date built: 2006
Condition: Used
Plate Shear - Hydraulic MVD HGM 3010
Ad ID: M97912
ab Standort Germany
sheet width 3000 mm
plate thickness 10,00 mm
distance between columns mm
total power requirement 22 kW
weight of the machine ca. 10 t
dimensions of the machine ca. m
Price on request
Send request
Category: Metal cutting machines -> Plate shears
CIDAN CIDAN HSM-F20-3,0
Date built: CIDAN HSM-F20-3,0
Condition: Used
CIDAN CIDAN HSM-F20-3,0
Ad ID: M97878
Žitavského 496, 156 00 Praha
The machine is in a good technical condition. Not under power, not possible to test. it

Details:
Max. Schnittlänge: 2050 mm
Max. Blechdicke: 3 mm
Antrieb einer Schere: ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic AMADA GPX 630
Date built: 1995
Condition: Used
Plate Shear - Hydraulic AMADA GPX 630
Ad ID: M97585
Ahaus Germany
sheet width 3050 mm
plate thickness 6,35 mm
thickness at "Niro-steel" 4,0 mm
down holder 16 Stück
table length 575 mm
Control AMADA
cutting angle 40° - 2°20 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Hydr. Schwingschnitt Tafelschere - HERA HSS III
Date built: 1986
Condition: Used
Hydr. Schwingschnitt Tafelschere - HERA HSS III
Ad ID: M97132
Germany
Hydr. Schwingschnitt Tafelschere HERA Typ HSS III
Fabr. Nr. 598 Baujahr 1986
Schnittlänge 3100 mm
Schnittstärke 3 mm
Ständerausladung 200 mm
Messerhübe 25 ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
BAYKAL HNC 6106
Date built: HNC 6106
Condition: Used
BAYKAL HNC 6106
Ad ID: M96291
Žitavského 496, 156 00 Praha
Machine in very good condition, under power, can be tested after agreement.

Details:
Max. Schnittlänge: 6000 mm
Max. Dicke des Schneidmaterials: 6 mm
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic HEZINGER B10-3000
Date built: 2013
Condition: Used
Plate Shear - Hydraulic HEZINGER B10-3000
Ad ID: M96116
Ahaus Germany
sheet width 3100 mm
plate thickness 10.0 mm
thickness at "Niro-steel" 6.0 mm
cutting angle 2.0 °
down holder 14 Stück
no. of strokes 13 - 18 Hub/min
back stop - ...
Price on request
Send request
Category: Metal cutting machines -> Plate shears
Plate Shear - Hydraulic ECLAIR / PASKOWSKY-Schweiz ASS. 5 mm
Date built: 1976
Condition: Used
Plate Shear - Hydraulic ECLAIR / PASKOWSKY-Schweiz ASS. 5 mm
Ad ID: M96070
Bünde bei Bielefeld Germany
sheet width 3050 mm
plate thickness 5 mm
distance between columns - mm
table height 750 mm
strokes per minute until 25 - 80
cutting angle 1° 10´
Number of ...
Price on request
Send request
tramao-Logo

Sell used Plate shears

Get details!
Sell your metal processing machines, machine tools, printing machines, construction machines, wood processing machines on tramao.com.

You are in the "Plate shears" category. This category belongs to the main category of Metal cutting machines. The main category of Metal cutting machines also includes other new and used machines that may be of interest to you. Check our extensive range!

The range includes machines such as Chamfering machines, Circular shears, Cooping machines, Diecutters, Flame cutting machines, Hand lever shears, Iron workers, Laser cutting machines, Nibbling machines, Pipe cutting machines, Plasma cutting lines, Plate shears, Punching machines, Punching presses, Sheet and table shears, Water jet cutting systems etc.! In addition to the categorized machines, tramao's range also includes new and used forklifts, cranes and means of transport.

There is also the option to search for spare parts, tools and the associated service companies.

Plate shears - This has nothing to do with chocolate

The plate shears or guillotine shears belong to the field of cutting manufacturing technology. As the name shears or scissors suggests, only the cutting of material is defined as a machining process.

Structure and functionality of plate shears

With the classic plate or guillotine shears, the cut is a straight cut. The structure and the mode of operation are usually carried out in a vertical construction. The main components of a guillotine shear are the plate table, guillotine shear frame, lower cutting beam with lower knife, upper cutting beam with upper knife, stops, hold-down device (blank- or downholder) and the drive. The drive is usually carried out by means of one or more hydraulic cylinders which move the upper cutting beam and the upper knife vertically up and down. The hydraulic cylinders can attack the upper cutting beam directly or the movement of the upper beam takes place via a toggle lever. The upper cutter beam is guided together with the knife in the frame of the guillotine shears.

The cut takes place at the moment when the upper knife passes the lower knife. The knives do not touch, but must be set to a defined gap. When cutting steel, the gap, also known as the cutting gap, must be approx. 10% of the material thickness to be cut with guillotine shears. The cutting gap varies from material to material. The quality of the cut can also be influenced by the cutting gap. The narrower the gap, the higher the cutting force required. The setting values given by the manufacturers are only recommendations and usually have to be optimized by the operators. The cutting gap becomes smaller and smaller as the material thickness of the material to be cut decreases. It can also go to zero, but it must be prevented that the knives overlap. Then knives breakouts cannot be avoided. From the paper scissors is known the effect that the cutting edges of the knives slide against each other during the cut.

The material to be cut is in a horizontal position between the upper and lower knife during the cut. Since the knives exert a torque on the material to be cut during the cut, a movement (rotation) must be absorbed. On the one hand, the material is supported on the shear table, on the other hand, a hold-down device prevents the material from being lifted off during the cut. The hold-down clamps the material positively during the cut.

The bottom knife of a guillotine shears is arranged horizontally. The upper knife is arranged at an angle. This incline is normally between 1 ° and 3 °. The more obliquely the knife of the guillotine shears is arranged, the lower the cutting force. But the stroke of the upper cutter beam to be carried out raises with the increase in the cutting angle. The risk of permanent deformation of the material to be cut after the cut also increases with the size of the cutting angle.

Another parameter for a right-angled cut is that the two knives do not move past one another in parallel, but rather that the upper knife is engaged by a clearance angle. A useful clearance angle is approx. 1.5 ° (for metals). The thicker the material to be cut, the more important it is to choose the right clearance angle for an rectangular cutting edge.

 


 

Wide range of plate shears and guillotine shears

In the metal sector, the guillotine shears for larger material thicknesses are equipped with hydraulic drives, as already described. Manually operated guillotine shears are also known from the paper and film sector. Pneumatic or electric drives are also conceivable with a somewhat higher expenditure of force.

For the processing of large and small workpieces, the plate and guillotine shears are available in different sizes and performance levels. One variant is the width, which can range from a knife length of 100 mm to widths over 10 m. The material thickness of the material to be cut ranges from a few micrometers to a thickness of over 200 mm. With short knife lengths and large material thicknesses, the guillotine shears mutate into billet shears or profile shears.

The variety of guillotine shears naturally also extends to the material. The most famous guillotine shears are those for metals, cardboard or plastics.

Other types of scissors, which in the broadest sense also work like plate shears, are:


-         
Swinging shears (circular movement of the upper cutter beam)
-          Knee lever shears
-          Crop shears
-          Rotary shears (cutting beams upper and lower move on eccentrics)
-          Flying shears (shear is mounted on a sliding carriage)

Rotating and flying shears are used in cut-to-length lines for the cutting process.

The knives - the hard core of a pair of blades

Hardened and ground cutting edges are the characteristics of a knife. The material is a tool steel to achieve the necessary hardness. A good knife can be sharpened several times before it is completely worn out. The grinding can be done on normal surface grinding machines.

With us you will find a large selection of used plate shears

tramao offers you a large selection of used plate or guillotine shears. The plate shears in the metal category can be found in the metal cutting machines area.

You will find the right service companies for repairs and spare parts procurement on tramao.de.

You will also find a wide range of machine accessories on tramao. Not to be forgotten is our range of tools, including knives.

If you decide to buy used guillotine shears, you will find a large selection of well-known manufacturers such as Baykal, Durma, Safan, Haco, Digep, Fermat, Fasti or Matra on tramao.

 

 

CO