Conventional lathes – lathe-conventional-electronic BULMAK / ZMM CU325/1000

Location article

Manufacturer

Description

turning diameter 325 mm
turning length 1000 mm
swing diameter over bed slide 250 mm
Swingdiameter in the bed bridge 440 mm
reus 12 (85-2000) U / min
tail stock MK 3
quill stroke 100 mm
diameter of quill 40 mm
spindle taper DIN 55027 Nr. 5
spindle bore 32 mm
feed längs 0,006 - 1,77 m / min
feed quer 0,003 - 0,885 m / min
total power requirement 2,2 kW
weight of the machine ca. 770 kg
dimensions of the machine ca. 2150 x 950 x 1350 mm
turning diameter 325 mm
turning length 1000 mm
swing diameter over bed slide 250 mm
Swingdiameter in the bed bridge 440 mm
reus 12 (85-2000) U / min
tail stock MK 3
quill stroke 100 mm
diameter of quill 40 mm
spindle taper DIN 55027 Nr. 5
spindle bore 32 mm
feed längs 0,006 - 1,77 m / min
feed quer 0,003 - 0,885 m / min
total power requirement 2,2 kW
weight of the machine ca. 770 kg
dimensions of the machine ca. 2150 x 950 x 1350 mm
turning diameter 325 mm
turning length 1000 mm
swing diameter over bed slide 250 mm
Swingdiameter in the bed bridge 440 mm
reus 12 (85-2000) U / min
tail stock MK 3
quill stroke 100 mm
diameter of quill 40 mm
spindle taper DIN 55027 Nr. 5
spindle bore 32 mm
feed längs 0,006 - 1,77 m / min
feed quer 0,003 - 0,885 m / min
total power requirement 2,2 kW
weight of the machine ca. 770 kg
dimensions of the machine ca. 2150 x 950 x 1350 mm
turning diameter 325 mm
turning length 1000 mm
swing diameter over bed slide 250 mm
Swingdiameter in the bed bridge 440 mm
reus 12 (85-2000) U / min
tail stock MK 3
quill stroke 100 mm
diameter of quill 40 mm
spindle taper DIN 55027 Nr. 5
spindle bore 32 mm
feed längs 0,006 - 1,77 m / min
feed quer 0,003 - 0,885 m / min
total power requirement 2,2 kW
weight of the machine ca. 770 kg
dimensions of the machine ca. 2150 x 950 x 1350 mm
turning diameter 325 mm
turning length 1000 mm
swing diameter over bed slide 250 mm
Swingdiameter in the bed bridge 440 mm
reus 12 (85-2000) U / min
tail stock MK 3
quill stroke 100 mm
diameter of quill 40 mm
spindle taper DIN 55027 Nr. 5
spindle bore 32 mm
feed längs 0,006 - 1,77 m / min
feed quer 0,003 - 0,885 m / min
total power requirement 2,2 kW
weight of the machine ca. 770 kg
dimensions of the machine ca. 2150 x 950 x 1350 mm
turning diameter 325 mm
turning length 1000 mm
swing diameter over bed slide 250 mm
Swingdiameter in the bed bridge 440 mm
reus 12 (85-2000) U / min
tail stock MK 3
quill stroke 100 mm
diameter of quill 40 mm
spindle taper DIN 55027 Nr. 5
spindle bore 32 mm
feed längs 0,006 - 1,77 m / min
feed quer 0,003 - 0,885 m / min
total power requirement 2,2 kW
weight of the machine ca. 770 kg
Furnishing:
- Cooling device
- Machine light
- chip rear wall
- Spindle protection
- Lathe chuck protection
- Tool holder protection
- Foot pedal with braking function CE
- Interchangeable gears
*incl. Optional equipment
- 3-jaw chuck Ø 160 mm type 3204 / DIN6350, BISON
- MULTIFIX quick-change holder type A, incl. 4 tool holders
- 2-axis digital display DRO Newall
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition

Date built

Machine under power