Metal processing machines -> Eroding machines

Used Machinery: Eroding machines

–

Search result – 88 Eroding machines found

Category: Metal processing machines -> Eroding machines
Vertical Eroding Machine Deckel DE25-C
Date built: 1988
Condition: Used
Vertical Eroding Machine Deckel DE25-C
Ad ID: M108971
Germany
Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Wire EDM Machine Charmilles ROBOFIL 240SL
Date built: 2005
Condition: Used
Wire EDM Machine Charmilles ROBOFIL 240SL
Ad ID: M107984
Germany
Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Fanuc Robocut Alfa 0iE
Date built: Robocut Alfa 0iE
Condition: Used
Fanuc Robocut Alfa 0iE
Ad ID: M104995
Žitavského 496, 156 00 Praha


Details:
X Weg: 370 mm
Y Weg: 270 mm
Z Weg: 255 mm
Aufspannfläche: 700x600 mm
Steuerung Fanuc: Fanuc 31i
Maschinenabmessungen L x B x H: ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Wire EDM Machine Charmilles ROBOFIL 4030 SI
Date built: 2000
Condition: Used
Wire EDM Machine Charmilles ROBOFIL 4030 SI
Ad ID: M102539
Germany
Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.

Ref.Nr.: INNO26563
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Vertical EDM Machine Charmilles 35P
Date built: 2001
Condition: Used
Vertical EDM Machine Charmilles 35P
Ad ID: M102541
Germany
Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.

Ref.Nr.: INNO26561
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire EDM machine FANUC ROBOCUT Alpha-0iE
▶
Date built: 2013
Condition: Good
Wire EDM machine FANUC ROBOCUT Alpha-0iE
Ad ID: M102385
Brno Czech Republic
Catalog No. : 7378
Type: ROBOCUT Alpha-0iE
Producer: FANUC
Made in: 2013, GO 2020
Characteristic:
Control system: FANUC Series 31i-WA
Total hours: 17500 ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire EDM machine HITACHI H-CUT 203M20
Date built: 1995
Condition: Good
Wire EDM machine HITACHI H-CUT 203M20
Ad ID: M102386
Brno Czech Republic
Catalog No. : 7379
Type: H-CUT 203M20
Producer: HITACHI
Made in: 1995
Characteristic:
Maximum travel length X-axis: 320 mm
Maximum travel length Y-axis: 250 ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
Die Sinking EDM machine KING SPARK E-36P
Date built: 1998
Condition: Good
Die Sinking EDM machine KING SPARK E-36P
Ad ID: M102388
Brno Czech Republic
Catalog No. : 7380
Type: E-36P
Producer: KING SPARK
Made in: 1998
Characteristic:
Maximum machining current: 60 A
Table dimensions: 838 x 305 mm
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Spark Erosion Machine Heun MD-435
Date built: 2017
Condition: Used
Spark Erosion Machine Heun MD-435
Ad ID: M101297
Germany
X-travel: 400mm, y-travel: 350mm, z-travel: 250mm, W-travel: 300mm, max. load: 400kg, length: 1090mm, width: 1750mm, height: 2075mm, weight: 1.2t, with documentation.

Ref.Nr.: INNO26434
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
Die Sinking EDM machine Charmilles FORM 2-LC ZNC
Condition: Good
Die Sinking EDM machine Charmilles FORM 2-LC ZNC
Ad ID: M101076
Brno Czech Republic
Catalog No. : 7280
Type: FORM 2-LC ZNC
Producer: Charmilles
Made in: -
Characteristic:
Table dimensions: 500x400 mm
Maximum travel length X-axis: 300 mm
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Charmilles Technologies Robofil 290
Date built: Robofil 290
Condition: Used
Charmilles Technologies Robofil 290
Ad ID: M98137
Žitavského 496, 156 00 Praha
machine suitable for overhaul or spare parts

Details:
X Weg: 400 mm
Y Weg: 250 mm
Z Weg: 200 mm
Maschinenabmessungen L x B x H: 1803x1600x2172 mm
Price on request
Send request
Category: Eroding machines -> Other electric discharge machines
SEIBU EW 600 J
Date built: 1995
Condition: Used
SEIBU EW 600 J
Ad ID: M98061
Germany
Lagernummer:
1106-ERO8

Maschinenart:
Erodiermaschine

Fabrikat:
SEIBU

Typ:
EW 600 J

Baujahr:
1995
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
MAKINO U32K
Date built: U32K
Condition: Used
MAKINO U32K
Ad ID: M97993
Žitavského 496, 156 00 Praha
The machine is in excellent technical condition and can be tested after prior consultation. Slanting cut +- 15 degrees/100 mm. Wire diameter: 0.1-0.3 mm.

Details:
X Weg: 370 mm
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Start Hole EDM Machine Ocean Technologies OCT-0035
Date built: 2011
Condition: Used
Start Hole EDM Machine Ocean Technologies OCT-0035
Ad ID: M97934
Germany
Z-axis: 300mm, rotational speed: 0-10/min or variable, electrode diameter: 0-6mm, number of tools: 1, max. tool length: 300mm, connected load: 2.5kVA, weight: 100kg, operating hours: 250h, with ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire Eroding Machine AGIE - CHARMILLES Cut 300 SP
Date built: 2015
Condition: Used
Wire Eroding Machine AGIE - CHARMILLES Cut 300 SP
Ad ID: M97175
Auf Anfrage Germany


Details:
x-travel: 550 mm
y-travel: 350 mm
z-travel: 400 mm
U-travel: 550 mm
V- travel: 350 mm
volume: 1200 L
material diameter: round: ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
AGIE CUT 20 P
Date built: CUT 20 P
Condition: Used
AGIE CUT 20 P
Ad ID: M97201
Žitavského 496, 156 00 Praha
under power

Details:
X Weg: 350 mm
Y Weg: 250 mm
Z Weg: 250 mm
Max. Werkstückgewicht: 400 kg
Max. Werkzeugabmessungen: 900 x 680 x 250 mm
Die ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Vertical Eroding Machine AGIE DDl-004
Condition: Used
Vertical Eroding Machine AGIE DDl-004
Ad ID: M96312
Germany
Controls: AGIE PULS 30L, connected load: 11kVA, an inspection on site is possible.

Ref.Nr.: INNO26192
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Wire EDM Machine Agie Charmilles Robofil 690
Date built: 2007
Condition: Used
Wire EDM Machine Agie Charmilles Robofil 690
Ad ID: M96021
Germany
X-travel: 800mm, y-travel: 600mm, z-travel: 400mm, U-travel: 60mm, V-travel: 60mm, workpiece dimensions: 1300x910x400mm, max. workpiece weight: 2.3t, dielectric capacity: 210l, connected load: 10kVA, ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
CNC Roller Eroding Machine Waldrich Siegen EDT 420/3 CNCx2500-13
Date built: 1993
Condition: Used
CNC Roller Eroding Machine Waldrich Siegen EDT 420/3 CNCx2500-13
Ad ID: M95707
Germany
Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Charmilles Technologies ROBOFIL 240 SL
Date built: ROBOFIL 240 SL
Condition: Used
Charmilles Technologies ROBOFIL 240 SL
Ad ID: M95262
Žitavského 496, 156 00 Praha
The machine is in good condition, it can be tested.

Details:
X Weg: 350 mm
Y Weg: 220 mm
Z Weg: 220 mm
Maschinengewicht: 2100 kg
Max. Werkstückgewicht: 750 ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
ZIMMER & KREIM Cavity Sinking EDM - Machine ZK 700 Genius mit Chameleon
Date built: 2006/2012
Condition: Used
ZIMMER & KREIM Cavity Sinking EDM - Machine ZK 700 Genius mit Chameleon
Ad ID: M94251
Deutschland Germany
The machine is in daily use and is technically and visually
in a very good condition.
Movie:
https://www.youtube.com/watch?v=PR71oX-d4ko&t=7s

ZIMMER & KREIM EDM machine ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
Die Sinking EDM machine SODICK AD3L
Date built: 2010
Condition: Used
Die Sinking EDM machine SODICK AD3L
Ad ID: M94205
602 00 Czech Republic
Catalog No. : 7097
Type: AD3L
Producer: SODICK
Made in: 2010
Characteristic:
Maximum travel length X-axis: 300 mm
Maximum travel length Y-axis: 250 mm
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Vertical EDM Machine ONA DATIC D 360
Date built: 1992
Condition: Used
Vertical EDM Machine ONA DATIC D 360
Ad ID: M91567
Germany
Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire EDM AGIE AGIECUT CLASSIC 2S
Date built: 2001
Condition: Used
Wire EDM AGIE AGIECUT CLASSIC 2S
Ad ID: M91370
Germany
working range -wire cutting-
worpiece length max.:   750 mm
worpiece width (max):   550 mm
X-axis travel:   350 mm
Y-axis travel:   250 ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
CHARMILLES Senkerodiermaschine Roboform 350 inklusive Zubehör und Dokumentation
Condition: Used
CHARMILLES Senkerodiermaschine Roboform 350 inklusive Zubehör und Dokumentation
Ad ID: M90874
Germany
CHARMILLES
 Hier bieten wir eine Senkerodiermaschine an.
Technische Daten:

Tisch:
Tischgröße : 500x400 mm
Max Werkstückgewicht 500 kg
T-Nuten:
€ 45.000,-
Send request
Category: Metal processing machines -> Eroding machines
Wire-Cut EDM System Mitsubishi FX20K
Date built: 1999
Condition: Used
Wire-Cut EDM System Mitsubishi FX20K
Ad ID: M89122
Germany
Max. load: 800kg, weight: 2.55t, the machine needs overhauling, the generator is defective, an inspection is possible.

Ref.Nr.: INNO25821
Price on request
Send request
Category: Eroding machines -> Other electric discharge machines
Charmilles Technologies Form LC-2
Date built: Form LC-2
Condition: Used
Charmilles Technologies Form LC-2
Ad ID: M89096
Žitavského 496, 156 00 Praha
The machine is in good technical condition, possible to test under power.

Details:
X Weg: 300 mm
Y Weg: 200 mm
Z Weg: 200 mm
Maschinenabmessungen L x B x H: ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Start Hole EDM Machine System Castek Mechatron HK-24
Date built: 2001
Condition: Used
Start Hole EDM Machine System Castek Mechatron HK-24
Ad ID: M88924
Germany
Length: 1000mm, width: 1200mm, height: 2500mm, the machine has not been run for some time, an inspection is possible.

Ref.Nr.: INNO25805
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire eroding machine SODICK VL600 Q
Date built: 2015
Condition: Used
Wire eroding machine SODICK VL600 Q
Ad ID: M88871
Czech Republic
Catalog No. : 6949
Type: VL600 Q
Producer: SODICK
Made in: 2015
Characteristic:
Length of the table: 1040 mm
Table width: 780 mm
Maximum travel ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
Die Sinking EDM machine Penta 433GS
Date built: 2016
Condition: Used
Die Sinking EDM machine Penta 433GS
Ad ID: M88778
Czech Republic
Catalog No. : 6945
Type: 433GS
Producer: Penta
Made in: 2016
Characteristic:
Control system: PENTA
Total hours: 2935 h
Hours on: 1154 h
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
MITSUBISHI ELECTRIC FA 20S Advance
Date built: FA 20S Advance
Condition: Used
MITSUBISHI ELECTRIC FA 20S Advance
Ad ID: M88626
Žitavského 496, 156 00 Praha
The machine is in very good condition. The machine comes with a postprocessor for NX CAM

Details:
X Weg: 500 mm
Y Weg: 350 mm
Z Weg: 300 mm
Maschinenabmessungen L ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Vertical Eroding Machine AGIE CHARMILLES AGIETRON EMT 1.10
Condition: Used
Vertical Eroding Machine AGIE CHARMILLES AGIETRON EMT 1.10
Ad ID: M87717
Germany
X-travel: 250mm, y-travel: 160mm, table dimensions: 420x250mm, max. workpiece height: 160mm, max. workpiece weight: 120kg, length: 1545mm, width: 1240mm, height: 1065mm, weight: 540kg, with ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Vertical Eroding Machine AGIE 30L MESS DIG RSF
Date built: 1979
Condition: Used
Vertical Eroding Machine AGIE 30L MESS DIG RSF
Ad ID: M87718
Germany
Connected load: 6.2kVA, weight: 325kg, with Head AGIE TESTA-10, weight: 120kg, the machine should be overhauled, an inspection is possible.

Ref.Nr.: INNO25704
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Fanuc ROBOCUT Alpha 0iA
Date built: ROBOCUT Alpha 0iA
Condition: Used
Fanuc ROBOCUT Alpha 0iA
Ad ID: M87284
Žitavského 496, 156 00 Praha
The machine is in good technical condition, possible to test under power.

Details:
X Weg: 320 mm
Y Weg: 220 mm
Z Weg: 180 mm
Max. Werkstückgewicht: 500 kg
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire EDM machine FANUC Robocut 0iA
Date built: 2000
Condition: Good
Wire EDM machine FANUC Robocut 0iA
Ad ID: M86996
Brno Czech Republic
Catalog No. : 6869
Type: Robocut 0iA
Producer: FANUC
Made in: 2000
Characteristic:
Control system: FANUC
Maximum travel length X-axis: 320 mm
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire Eroding Machine AGIE-CHARMILLES CUT 2000 AWC
Date built: 2012
Condition: Used
Wire Eroding Machine AGIE-CHARMILLES CUT 2000 AWC
Ad ID: M86931
Auf Anfrage Germany


Details:
x-axis: 350 mm
y-axis: 250 mm
z-axis: 256 mm
U-axis: +/-70 mm
V-axis: +/-70 mm
dimension of workpiece: 750 x 550 x 256 mm
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Eroding machine AGIE-CHARMILLES CUT-400
Date built: 2013
Condition: Used
Eroding machine AGIE-CHARMILLES CUT-400
Ad ID: M86932
Auf Anfrage Germany


Details:
table-size: 800 x 500 mm
workpiece height: +-30º/510 mm
travel x / y / z: 800 x 550 x 510 mm
workpiece sizes: 1300 x 1000 x 510 mm
workpiece ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
Cavity Sinking EDM - Machine AGIE-CHARMILLES Form 2000 HP
Date built: 2012
Condition: Used
Cavity Sinking EDM - Machine AGIE-CHARMILLES Form 2000 HP
Ad ID: M86933
Auf Anfrage Germany


Details:
table length: 600 mm
table width: 400 mm
x-axis: 400 mm
y-axis: 300 mm
z-axis: 350 mm
workpiece sizes: 900 x 630 x 350 mm
volume: 490 ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
Cavity Sinking EDM - Machine ONA-DATIC PD-4.120 EO
Condition: Used
Cavity Sinking EDM - Machine ONA-DATIC PD-4.120 EO
Ad ID: M86861
Lemmer, NL Germany
table width 700 mm

total power requirement kW
weight of the machine ca. t
required space m
The data for this ad was created with ModulMWS - the software solution of ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Vertical EDM Machine Mitsubishi EA12 VM ADVANCE
Date built: 2011
Condition: Used
Vertical EDM Machine Mitsubishi EA12 VM ADVANCE
Ad ID: M85965
Germany
Compressed air supply: 27l/min, length: 1750mm, width: 2050mm, height: 2235mm, weight: 3.7t.

Ref.Nr.: INNO25463
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
MITSUBISHI ELECTRIC DWC 110
Date built: DWC 110
Condition: Used
MITSUBISHI ELECTRIC DWC 110
Ad ID: M85759
Žitavského 496, 156 00 Praha
The machine is in a good technical condition. Under power. It can be tested.

Details:
X Weg: 300 mm
Y Weg: 450 mm
Z Weg: 265 mm
Maschinengewicht: 2700 kg
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire EDM machine SODICK SL 600 Q
▶
Date built: 2014
Condition: Used
Wire EDM machine SODICK SL 600 Q
Ad ID: M85553
Brno Czech Republic
Catalog No. : 6784
Type: SL 600 Q
Producer: SODICK
Made in: 2014
Characteristic:
Control system: Fanuc
Maximum travel length X-axis: 600 mm
Maximum ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire EDM machine FANUC Robocut Alpha OiD
▶
Date built: 2008
Condition: Used
Wire EDM machine FANUC Robocut Alpha OiD
Ad ID: M85459
Brno Czech Republic
Catalog No. : 6772
Type: Robocut Alpha OiD
Producer: FANUC
Made in: 2008
Characteristic:
Control system: FANUC Series 310iS-WA
Maximum travel length X-axis: ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
EDM cutting machine HITACHI 355Y
Date built: 2000
Condition: Good
EDM cutting machine HITACHI 355Y
Ad ID: M85271
Brno Czech Republic
Catalog No. : 4296
Type: 355Y
Producer: HITACHI
Made in: 2000
Characteristic:
Length of the table: 1160 mm
Width of the table: 638 mm
Maximum travel ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
EDM cutting machine HITACHI 254Y/FF3
Date built: 2004
Condition: Good
EDM cutting machine HITACHI 254Y/FF3
Ad ID: M85281
Brno Czech Republic
Catalog No. : 2399
Type: 254Y/FF3
Producer: HITACHI
Made in: 2004
Characteristic:
Maximum travel length X-axis: 250 mm
Maximum travel length Y-axis: 400 ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire erosion machine Hitachi 254Z
Date built: 2003
Condition: Good
Wire erosion machine Hitachi 254Z
Ad ID: M85247
Brno Czech Republic
Catalog No. : 5124
Type: 254Z
Producer: Hitachi
Made in: 2003
Characteristic:
Control system: FANUC
Length of the table: 400 mm
Width of the table: ...
Price on request
Send request
Category: Eroding machines -> Wire-cut eroding machines
Wire eroding machine Hitachi 254Y
Date built: 2004
Condition: Good
Wire eroding machine Hitachi 254Y
Ad ID: M84599
Brno Czech Republic
Catalog No. : 6039
Type: 254Y
Producer: Hitachi
Made in: 2004
Characteristic:
Control system: MARK-10W
Travel length X-axis: 410 mm
Travel length ...
Price on request
Send request
Category: Eroding machines -> Die-sinking eroding machines
Die Sinking EDM machine AGIE AGIETRON HYPERSPARK
Date built: 2006
Condition: Good
Die Sinking EDM machine AGIE AGIETRON HYPERSPARK
Ad ID: M84532
Brno Czech Republic
Catalog No. : 6319
Type: AGIETRON HYPERSPARK
Producer: AGIE
Made in: 2006
Characteristic:
Control system: AGIEVISION
Total hours: 69006 h
Hours on: ...
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Wire EDM Machine Seibu EW-A5 SGC
Date built: 1998
Condition: Used
Wire EDM Machine Seibu EW-A5 SGC
Ad ID: M84372
Germany
Weight: 3t, with Power Supply Unit SW-A1CGC.

Ref.Nr.: INNO25246
Price on request
Send request
Category: Metal processing machines -> Eroding machines
Vertical EDM Machine CDM ROVELLA C4
Condition: Used
Vertical EDM Machine CDM ROVELLA C4
Ad ID: M84211
Germany
Including various tool cones.

Ref.Nr.: INNO25227
Price on request
Send request
 tramao-Logo

Sell used Eroding machines

Get details!
Sell your metal processing machines, machine tools, printing machines, construction machines, wood processing machines on tramao.com.
«12»

You are in the "Eroding machines" category. This category belongs to the main category of Metal processing machines. The main category of Metal processing machines also includes other new and used machines that may be of interest to you. Check our extensive range!

The range includes machines such as Accessories, Casting machines, Cleaning devices, Drilling machines, Eroding machines, Fine tuning machines, Forging machines, Gear cutting machines, Grinding machines, Hardening machines, Machining centers, Metal connecting machines, Metal cutting machines, Metal forming machines, Milling machines, millers, Miscellaneous, Presses, Sawing machines, Shaping machines & Broaching machines & Drawing machines, Sheet- and Coil-processing lines, Thread production machines, Turning machines, lathes, Wire processing machines etc.! In addition to the categorized machines, tramao's range also includes new and used forklifts, cranes and means of transport.

There is also the option to search for spare parts, tools and the associated service companies.

CO