Інші формувальні машини – bending machine horizontal RHTC PROFI PRESS HB - 28

місце зберігання

виробник

опис

pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
diameter of piston 130 mm
work speed min. 2 m / sec
work speed max. 9,8 m / sec
return speed 20 mm / sec
Max. pressure 200 bar
weight of the machine ca. 0,65 t
total power requirement 4 kW
dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
diameter of piston 130 mm
work speed min. 2 m / sec
work speed max. 9,8 m / sec
return speed 20 mm / sec
Max. pressure 200 bar
weight of the machine ca. 0,65 t
total power requirement 4 kW
dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
diameter of piston 130 mm
work speed min. 2 m / sec
work speed max. 9,8 m / sec
return speed 20 mm / sec
Max. pressure 200 bar
weight of the machine ca. 0,65 t
total power requirement 4 kW
dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
diameter of piston 130 mm
work speed min. 2 m / sec
work speed max. 9,8 m / sec
return speed 20 mm / sec
Max. pressure 200 bar
weight of the machine ca. 0,65 t
total power requirement 4 kW
dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
diameter of piston 130 mm
work speed min. 2 m / sec
work speed max. 9,8 m / sec
return speed 20 mm / sec
Max. pressure 200 bar
weight of the machine ca. 0,65 t
total power requirement 4 kW
dimensions of the machine ca. 1,15 x 0,75 x 1,1 m
pressure 28 t
stroke 180 mm
table-size 300 x 550 mm
diameter of piston 130 mm
work speed min. 2 m / sec
work speed max. 9,8 m / sec
return speed 20 mm / sec
Max. pressure 200 bar
weight of the machine ca. 0,65 t
total power requirement 4 kW
• The horizontal bending and straightening press from Profi Press is a
universal one Hydraulic press specially designed for performing bending,
profiling and Straightening work is designed. The applications of the machine
are different and depend on the accessories that are on the work table, the
Tool holder and are installed in the holes and pin holes.
• The HB-28 model is used for light bending measurements on the work table
equipped with an angle scale, and the press can also be equipped with tools
are supplied (for example block punching) that are placed on the tool holder
Can be assembled, as well as tools that are in the holes and pin holes
can be installed to carry out various types of work.
• The hydraulic system can be adjusted with the help of the pressure and flow
adjustment valves can be regulated, which is the pressing force and the speed
of the press influence. The press is equipped with a built-in manometer.
• The control panel is used to operate and display the piston stroke and for
Choice between manual or automatic operation, and the HB-28 model
is also with a built-in memory for up to 4 different programs
fitted.
• Operation is via electric foot pedals.
• The Profi Press HB-28 model can be equipped with various optional accessories
hearing parts and tools for installation on the workbench and the
Tool holder to be delivered.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

стан

рік побудови

Машина під потужністю