This HAAS VF-5 / 40TR Vertical Machining center was manufactured in the year 2018 in the United States. It is equipped with a HAAS control unit and has 5 axis (removable 210 mm 2-axis thumb rotary table). The machine has a programmable Coolant Nozzle; a multi-position nozzle that automatically directs coolant precisely at the cutting tool. It has a spindle speed of 8100 rpm.
Control Unit
Brand: HAAS
Main drive
Spindle speed range: 8100 rpm
Number of axis: 5
Movement
X-AXIS Movement: 1270
Y-AXIS Movement: 660
Z-AXIS Movement: 635
Additional equipment
: 95 gallon (360 liter) flood cooling system
: 24 +1 side-bayonet tool changer
Machine Benefits
Technical Machine Benefits:
- 5-axis vertical machining center (1270 x 660 x 635 mm) with removable 210 mm, 2-axis thumb rotary table
- X-axis: 1. 270mm / y-axis: 660mm / z-axis: 635mm / a-axis: +-120° / b-axis: 360°
- 40 cones
- 30 hp (22. 4 kw) vector disc / / 710 ipm (18. 0 m / min) rapids
- Built-in direct drive vane
- Wireless intuitive probing system: renishaw. Includes the haas visual programming system, macros, spindle orientation, and coordinate rotation and scaling.
- Standard program memory: 1 gb of onboard memory for program storage and backup.
- Chip auger: automatically removes chips from the machine, while compressing them and wringing out the coolant.
- Haasconnect: remote monitoring of your haas machine. Requires the machine to be connected to the internet.
- Ethernet interface: allows you to easily transfer files to and from the machine over a local wired network.
Qualitative Machine Benefits:
- Media display is used within an nc program to call up media files (images, videos, pdf files) from memory and display them on the control screen as the program runs.
- High-speed machining; allows faster feedrates and more complex toolpaths, without hesitation or starving the machine.
- Remote jog handle with extra-large touchscreen display; lets you to get up-close to the machine’s work area for part setup, changeover, and inspection, while still having control of the machine.
- Rigid tapping; synchronized tapping, with built-in tap cycles.
- Through-spindle coolant, 300 psi (21 bar). Provides high-pressure coolant directly through the cutting tool. Requires 3-phase power. Note: tsc cannot be installed in the field unless the tsc-ready option is ordered with the machine.
- Through-tool air blast; supplies high-pressure / high-flow air through the tool, directly to the cutting edge. Available for inline spindles, and 50-taper mills. Requires a haas through-spindle coolant system, or the tsc ready option.
- Auxiliary coolant filter system; a bag-style filtration system that keeps the coolant free of particulates down to 25 microns. Note: if high-pressure flood coolant (high pressure cool) is installed, do not connect the auxiliary coolant filter (acf) directly to the high-pressure flood coolant pump. To use the auxiliary coolant filter with high-pressure flood coolant, the filter must be connected through an optional through-spindle coolant (tsc) system.
- Programmable coolant nozzle; a multi-position nozzle that automatically directs coolant precisely at the cutting tool.
- Dwo / tcpc
- Machine other options: acf / tab / tsc / wips-r / rtap-3 | 
/uploadpic/tramaofinal_inserat/bilder/115937/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild6.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild7.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild8.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild9.jpg,/uploadpic/tramaofinal_inserat/bilder/115937/bild10.jpg
