Andre fræsemaskiner – Universal tool tool GJ 8140 K

Artikel beliggenhed

Fabrikant

Beskrivelse

Technical data:
Display: Three-axis digital display
Ways x / y / z: 800 mm / 350 mm / 400 mm
Feed rate: 10-500 (18) mm / min
Rms X + Z-axes: 1,200 mm / min
Rushing Y-axis: 1.200 mm / min
Tivane clamping surface: 800 x 400 horiz. Mm
Tiring clamping surface: 250 x 950 mm vert. Mm
Table loading: 400 kg
Main engine: 3 kW
Machine weight: 2,3 t
Space requirement: 1.820 mm x 1.640 mm x 1,710 mm 
Accessories: vertical milling head plus and minus 90 degrees pivotable, with a pin feed, for horizontal milling to the rear for horizontal milling; collet chuck with collet chucks, diameter 4,5,6,8,10,12,14,16 mm; short tool shank 22, 27 mm; reducing sleeves MK1, MK2, MK3, MK4; drill chuck, chip seed, milling mandrel, coolant device, operating instructions etc.   

Accessories

Accessories: vertical milling head plus and minus 90 degrees pivotable, with a pin feed, for horizontal milling to the rear for horizontal milling; collet chuck with collet chucks, diameter 4,5,6,8,10,12,14,16 mm; short tool shank 22, 27 mm; reducing sleeves MK1, MK2, MK3, MK4; drill chuck, chip seed, milling mandrel, coolant device, operating instructions etc.   

Status

Byggeår

Maskine under strøm

Vægt