Egyengető gépek – Roller leveller DUNKES HR 63/TR 25/HRW 25

Az elem helye

gyártó

Leírás

material width 3000 mm
material thickness 0 mm
no. of straightening rolls 0
total power requirement 22 kW
weight of the machine ca. 14,5 t
dimensions of the machine ca. 7,5 x 2,5 x 2,9 m
D U N K E S
Hydraulic Straightening System for Flat material and Section Material
With Straightening Press ( C-Frame ) Model HR 63 / TR 25 / HRW 25
Year 1990 ( H 89-1960 )
____________________________________________________________
Consisting of:
Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of
Piston 160 mm, Straightening speed up / down 25 / 75 mm / s, Daylight 550 mm,
Distance to column 620 mm, sensitive Straightening stroke via handlever with
turret-stop, Measuring device for accurate straitening via a lightbar
Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on
right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd / bwd
57 / 10 mm / s, designed as Pressbow which moves in both directions against a
straightening tool to avoid the turnovers of workpiece during straightening
process, 4 tool posts front and backside / left and right with a distance of
600 mm, Handlever for stroke movement.
Torsion straightening device for twisting the section material up to a power
of 25.000 Nm,
Resistance Moment 69.000 mm?, twisting force max. 320 N / mm?, workpiece
glamping 320 kN,
mounted on left hand side of Press as a integrated unit. The left handed
slide can be moved approx.. 3000 mm and is equipped as the clamping station
for the workpieces and the right handed unit is for clamping and twisting
hydraulically this workpiece up to 35 ? Display to see the torsion on a
lightbar.For the crossmovement / loading of workpiece is a roller chain
available
Straightening Bed for placing and for moving the workpiece towards to the
straightening devices,
consisting of conveyor roller tables left and right on the press with each
approx. 3000 mm length,rollers can be lifted pneumatically for easier
transportation. Between the two beds is a working gap for the vertical
straightening cylinder with two adjustable counter steadies with
exchangeables jaws. Mechanical measuring device to check tension of
workpiece built on presstable.
The 3 Straightening positions are electrically separated, so only one
position can be used on a time. Various pressing tools in different shapes
and lengths available. Also a roller support for straighten cylindrical
shafts or tubes up to 1.800 mm length to place it on the a.m. straightening
bed.

Oil tank capacity for hydraulic oil approx. 500 liters
Total electrical load approx. 22 kW - 400 V - 50 cycles
Weight approx. 14,5 to,
Outside dimension: 7,5 x 2,5 x 2,9 m height
Condition : good to very good ? can be soon inspected under power.
Delivery : ex stock ? as inspected here in stock
Payment : net ? after completion of contract
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

állapot

Építési év

Gép hatalom alatt