Teigteil- und Wirkmaschine WP Multimatic MUS 5

Vis ID: M80587
Pris ved forespørsel
Send forespørsel
Bilder
Video
Teigteil- und Wirkmaschine WP Multimatic MUS 5 - å kjøpe brukt/uploadpic/tramaofinal_inserat/bilder/80587/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild6.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild7.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild8.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild9.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild10.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild11.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild12.jpg,/uploadpic/tramaofinal_inserat/bilder/80587/bild13.jpg

Gjenstandens beliggenhet

Germany

Maskinnr.

Multimatic MUS 5

Beskrivelse

Teigteil- und Wirkmaschine WP Multimatic MUS 5
Baujahr: 2003
Typ: MUS 5-reihig
Edelstahlverkleidung
Gewichtsverstellung durch Handkurbel
Gewichtsbereich: 28 bis 95 g
Inkl. 1 Kammertrommel nach Wahl, nach Verfügbarkeit
Kapazität: 3.200 bis 10.000 Stk / h
Einzelne Kolben blockierbar

Delens tilstand

Brukt

Byggeår

2003

Maskin under kraft

Nei
Send forespørsel

Tilbud fra:

Altuntas GmbH

Altuntas GmbH
Opelstr. 29
64546 Mörfelden-Walldorf

Kontaktperson: Beytullah Altuntas

Send forespørsel
Vis telefonnummer
Tel.: 061057172301
Vis firmaprofil



Andre interessante tilbud i denne kategorien

DECKEL FP 1 Activ 3-axis  -  Tool Milling Machine
DECKEL FP 1 Activ 3-axis - Tool Milling Machine (BJ.1984)

Pris ved forespørsel
Folding Machine FASTI 271-20-2,5
Folding Machine FASTI 271-20-2,5

Pris ved forespørsel
FastBook Blockbinder mit Purus SW und inatec Premelter
FastBook Blockbinder mit Purus SW und inatec Premelter (BJ.2009)

Pris ved forespørsel
BMT 75, ANGULAR tool holder, no internal cooling DOOSAN
BMT 75, ANGULAR tool holder, no internal cooling DOOSAN

Pris ved forespørsel
VDI 40, angular tool holder, coupling Okuma, with internal cooling
VDI 40, angular tool holder, coupling Okuma, with internal cooling

€ 1.417,-
VDI 30, straight tool holder, coupling Okuma, with 80bar internal cooling, heavy duty
VDI 30, straight tool holder, coupling Okuma, with 80bar internal cooling, heavy duty

Pris ved forespørsel
Goodway GRW-4010
Goodway GRW-4010

Pris ved forespørsel
Vise OPTIMUM HMS 125
Vise OPTIMUM HMS 125

Pris ved forespørsel
Lagenfalz- und Heftmaschine Nagel Foldnak 4 mit Schuppenausleger
Lagenfalz- und Heftmaschine Nagel Foldnak 4 mit Schuppenausleger (BJ.2008)

Pris ved forespørsel
Tryout Press - hydraulic BERNARDO PWK 50 F
Tryout Press - hydraulic BERNARDO PWK 50 F

Pris ved forespørsel
CO