Maszyny używane: Maszyny do przetwórstwa tworzyw sztucznych

This ARBURG Allrounder 630S 2500-800 injection moulding machine was manufactured in May 2016. It offers a robust 2750kN clamping force, with a hydraulic drive system and precise control features, ...

This injection moulding machine, manufactured in 1999, has a robust design, weighing 53 tons, with a closing force of 11000 Kn. It includes hydraulic closing, M24 clamping threads, an ENGEL robot for ...

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. ...

This injection moulding machine was manufactured in 2000. The Negri Bossi 1500 boasts a closing strength of 15000 Kn and a screw diameter of 135 mm, optimized for precise performance. Key features ...

This injection moulding machine was manufactured in 2022. With a closing force of 15960 Kn and an opening stroke of 2500mm, the Italtech KS 1600/10800 offers precise control and ample space between ...

Clamping force: 2000kN, drive power: 37kW, injection volume: 377cm³, melt pressure: 1600bar. Screw diameter: 50mm, control: MC4 32-bit microprocessor control, nozzle type: R 15. Dimensions X/Y/Z: ...

Injection molding machine: clamping force: 5000kN, opening stroke: 1109mm, max. mold weight per plate/total: 5300kg/10600kg, drying time: 4.15s. Injection units: Unit 1: screw diameter: 90mm, ...

For the storage and pre-treatment of two-component materials such as polysulphides or silicones etc. There are 3 Reinhardt Technik NF1 freezer available. Years of construction: 1) 2009/2) 2000/3) ...

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. ...

max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: ...

Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.

warehouse no.: 503439
manufacturer: ENGEL
type: Victory 1050-220 TECH
controller: CC100
year of construction: 2006
operation hours: 92465 h

technical ...

screw size 30 mm
closing pressure 600 kN
total power requirement 70 kW
weight of the machine ca. t
dimensions of the machine ca. m
injection shot weight in Polysterol ...

Catalog No. : 7423
Type: ES 200/50 HL ST
Producer: Engel
Made in: 1998
Characteristic:
Clamping force: 50 t
Plate dimensions: 510x320 mm
Weight of ...

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A.
Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: ...

Catalog No. : 7418
Type: Concept 420/810-2300
Producer: Demag
Made in: 2006
Characteristic:
Clamping force: 420 t
Screw diameter: 60 mm
Injection ...

Catalog No. : 7416
Type: LXJ-2030
Producer: UNICH
Made in: 2014
Characteristic:
Laser power: 2x130 W
Length of the working table: 3000 mm
Width of ...

2021 AEB engineering, water demineralization system which has run less than 10 hours and is not used since then.

1) Be sure you have an Appropriate Area for the size of the machine

KrausMaffei (KM200-700 C1) Injection molding machine

Technical data

Injection moulding machine KM 200-700 C1
Machine number 61007782
Year of construction 2006

Injection molding machine ( machine is in production and can be viewed if there is demonstrable interest.
Wittmann Battenfeld Eco Power 110/350, with Unilog B 6 control;
Year of ...

Injection molding machine KraussMaffai KM 1300-14700;
Year of manufacture 1998;
Machine complete and intact.
Including Händling PSA 2080 (PSA = formerly Peter Suling Automation, now ...

Weight: 200kg, an inspection is possible.

Ref.Nr.: INNO26577

Platen dimensions: 1700x1250mm, with documentation, an inspection is possible.

Ref.Nr.: INNO26498

mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds; well-kept facility, was hardly in use

Technical data:
ultrasonic power: 8,4 kW

Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.

Ref.Nr.: INNO26494

Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the Fiber Placement process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site ...

Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- ...

Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.

Ref.Nr.: INNO26372

Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible.

Ref.Nr.: ...

warehouse no.: 503418
manufacturer: ARBURG
type: Allrounder 630 S 2500-1300
controller: ECO SELOGICA
year of construction: 2006

technical data clamping ...

warehouse no.: 503419
manufacturer: ARBURG
type: Allrounder 370C 800-250
controller: Selogica
year of construction: 2005

technical data clamping unit

There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: ...

Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.

Ref.Nr.: INNO26352

Operational hours counter: 62,699h, with documentation, without accessories.

Ref.Nr.: INNO26338

Operational hours counter: 85,318h, with documentation, without accessories.

Ref.Nr.: INNO26337

Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.

Ref.Nr.: INNO26336

Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.

Ref.Nr.: INNO26335

Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.

Ref.Nr.: INNO26334

Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing ...

Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.

Ref.Nr.: INNO26331

Catalog No. : 7235
Type: 6.5
Producer: Weber
Made in:
Characteristic:
Equipment:
Calibration table
Tow belt

Arburg 570 C 2K plastic injection moulding machine for sale.

Here are the technical details of the machine
Manufacturer: Arburg
Model: 570 C 2K
Year of manufacture: ...

Leapfrog Bolt Pro - industrial desktop 3D printer with
two print heads for sale.

The printer has approx. 1000 operating hours and has been checked and serviced annually by a ...

Pallmann mill/granulator for sale
Model: PS4-5 F
Year built: 1973
Number of rotations: Rotor 640

Find more here - https://www.ucymachines.com/

Contact us at ...

SPR059

PLASTIC INJECTION MOULDING MACHINE second-hand

manufacturer ENGEL, type Insert 200H/70

Construction: Rotary table

Clamping force: 70 ...

Brand: Farmet
Model: FE500
Condition: Used

Extruder for soya, cereals and waste products for animal feed production.
Extruder was used very little.

Find ...

Injection molding machine
Arburg Allrounder 320
Version 750 – 90/90
2K machine, with 2nd horizontal injection unit
Year of construction 1997
Operating hours: 30690 h

1988 Argurg 220-90-350-D, injection molding machine.

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com
[TABELLE]Manufacturer ...

Extruder with flat die, , Piovan feeder, polishing unit, haul-off, winder, platform scale, cooling system and tempering equipment

Find more here - https://www.ucymachines.com/
...

Injection moulding machine for sale.
The plant was used until recently.

Technical data
Manufacturer: Ferromatik Milacron
Type: K85D-S/2F
Year of manufacture: ...